Profile information

Norman Mohnfeld

https://orcid.org/0000-0002-9600-6209
View graph of relations
1 - 20 out of 24Page size: 20

Publications

  1. 2024
  2. Published

    Numerical investigation of rotational friction welding for C22.8 - 41Cr4 joints using a substitute model

    Mohnfeld, N., Wester, H., Tunc Karaer, G., Piwek, A. & Uhe, J., 2024, Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 1668-1677 10 p. (Material Forming: ESAFORM 2024).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  3. Published

    Numerical Modelling of Transformation-Induced Plasticity in Hot Forging Simulations

    Mohnfeld, N., Uhe, J., Wester, H., Kock, C. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 609-618 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  4. 2023
  5. Published

    Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading

    Behrens, B., Stockburger, E., Wester, H., Poll, G., Pape, F., Konopka, D. & Heimes, N., 30 Jun 2023, In: Lubricants. 11, 7, 14 p., 283.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Experimental and numerical investigation of dynamic transformation induced plasticity during hot forming

    Behrens, B., Uhe, J., Wester, H., Kock, C. & Heimes, N., 13 Jun 2023, METAL Conference Proeedings. p. 164-169

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Influence of Deformation on the Coating Properties of aircraft fuselage shells

    Jepkens, J., Heimes, N., Wester, H., Müller, P., Hübner, S., Wehrmann, S., Müller, M. & Behrens, B., 13 Jun 2023, METAL Conference Proeedings. p. 380-385

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Characterisation and Modelling of Intermetallic Phase Growth of Aluminium and Titanium in a Tailored Forming Process Chain

    Heimes, N., Wester, H., Golovko, O., Klose, C., Maier, H. J. & Uhe, J., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 32-41 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  9. Published

    Data quality assurance in the research process using the example of tensile tests

    Mohnfeld, N., Muller, L., Wawer, M. L., Uhe, J., Koepler, O., Auer, S., Lachmeyer, R. & Mozgova, I., 2023, DS 125: Proceedings of the 34th Symposium Design for X (DFX2023). p. 143-152

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. 2022
  11. Published

    Functionality Investigations of Dry-Lubricated Molybdenum Trioxide Cylindrical Roller Thrust Bearings

    Konopka, D., Pape, F., Heimes, N., Behrens, B., Möhwald, K. & Poll, G., 26 Apr 2022, In: COATINGS. 12, 5, 591.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products

    Thürer, S. E., Peters, K., Heidenblut, T., Heimes, N., Peddinghaus, J., Nürnberger, F., Behrens, B. A., Maier, H. J. & Klose, C., 1 Mar 2022, In: Materials. 15, 5, 18 p., 1692.

    Research output: Contribution to journal › Article › Research › peer review

  13. 2021
  14. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Process chain for the manufacture of hybrid bearing bushings

    Thürer, S. E., Chugreeva, A., Heimes, N., Uhe, J., Behrens, B. A., Maier, H. J. & Klose, C., Apr 2021, In: Production Engineering. 15, 2, p. 137-150 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Investigation of the Scaling of Friction Coefficients from the Nano to the Micro Level for Base Materials and Coatings

    Heimes, N., Pape, F., Konopka, D., Schöler, S., Möhwald, K., Poll, G. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 161-170 10 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  17. Published

    Molybdenum Based Coatings on 100Cr6 Bearing Steel Surfaces

    Schöler, S., Heimes, N., Konopka, D., Behrens, B., Poll, G. & Möhwald, K., 2021, Tagungsband 4. Niedersächsisches Symposium Materialtechnik. 6 p. (Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of materials research and engineering; vol. 10).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  18. 2020
  19. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Characterization and modeling of intermetallic phase formation during the joining of aluminum and steel in analogy to co-extrusion

    Behrens, B. A., Maier, H. J., Klose, C., Wester, H., Thürer, S. E., Heimes, N. & Uhe, J., 26 Nov 2020, In: Metals. 10, 12, p. 1-16 16 p., 1582.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale

    Heimes, N., Uhe, J., Thürer, S. E., Wester, H., Maier, H., Klose, C. & Behrens, B., 25 Sept 2020, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP). Berlin: Springer Berlin, p. 66-75 10 p. (Lecture Notes in Production Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  22. Published

    Lateral angular co-extrusion: Geometrical and mechanical properties of compound profiles

    Thürer, S. E., Peddinghaus, J., Heimes, N., Bayram, F. C., Bal, B., Uhe, J., Behrens, B., Maier, H. & Klose, C., Sept 2020, In: Metals. 10, 9, p. 1-15 15 p., 1162.

    Research output: Contribution to journal › Article › Research › peer review

  23. Published

    Characterization of molybdenum based coatings on 100Cr6 bearing steel surfaces

    Schöler, S., Schmieding, M., Heimes, N., Pape, F., Behrens, B., Poll, G. & Möhwald, K., 30 Jun 2020, In: Tribology Online. 15, 3, p. 181-185 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Determination of the flow behavior of the joining zones of hybrid semi-finished products by means of nanoindentation. Düsseldorf, Germany, Nanobruecken 2020, Nanomechanical Testing Conference & Bruker Hysitron User Meeting

    Matthias, T., Heimes, N., Pape, F. & Behrens, B., 2020

    Research output: Book/Report › Conference proceeding › Research

  25. Published

    Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid Profiles

    Behrens, B., Uhe, J., Thürer, S. E., Klose, C. & Heimes, N., 2020, In: Procedia Manufacturing. 47, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 Next