Profile information

Dr.  Markus Kästner

View graph of relations
81 - 100 out of 182Page size: 20

Publications

  1. 2016
  2. Published

    Fractal analysis of a new generation of HVOF sprayed coatings based on optical surface metrology

    Zou, Y., Kästner, M. & Reithmeier, E., 4 Jun 2016, In: Technisches Messen. 83, 6, p. 365-373 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Turbine blade wear and damage – An overview of advanced characterization techniques

    Schlobohm, J., Bruchwald, O., Frackowiak, W., Li, Y., Kästner, M., Pösch, A., Reimche, W., Reithmeier, E. & Maier, H. J., May 2016, In: Materialpruefung/Materials Testing. 58, 5, p. 389-394 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Comparison of LASER and LED illumination for fiber optic fringe projection

    Matthias, S., Kästner, M. & Reithmeier, E., 29 Apr 2016, Optical Sensing and Detection IV. Berghmans, F. & Mignani, A. G. (eds.). SPIE, 7 p. 989905. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9899).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Low-coherence interferometry based roughness measurement on turbine blade surfaces using wavelet analysis

    Zou, Y., Li, Y., Kaestner, M. & Reithmeier, E., 21 Mar 2016, In: Optics and Lasers in Engineering. 82, p. 113-121 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process

    Matthias, S., Loderer, A., Koch, S., Gröne, M., Kästner, M., Hübner, S., Krimm, R., Reithmeier, E., Hausotte, T. & Behrens, B. A., Feb 2016, In: Production Engineering. 10, 1, p. 51-61 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    Analysis of multiscale measurements of porous microstructures based on 3D optical microscopes

    Zou, Y., Kaestner, M. & Reithmeier, E., 27 Jan 2016, In: Measurement. 83, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  8. Published

    Forming tool inspection using fiber-optic sensor heads

    Matthias, S., Kästner, M., Reithmeier, E., Sieczkarek, P. & Tekkaya, A. E., 2016, Computational Vision and Medical Image Processing V: Proceedings of 5th Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2015. Tavares, J. M. R. S. & Jorge, R. M. N. (eds.). p. 335-340 6 p. (Computational Vision and Medical Image Processing V - Proceedings of 5th Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2015).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  9. Published

    Wear process monitoring of thermal spray coatings and surface topography analysis using a confocal laser scanning microscopy

    Zou, Y., Kästner, M. & Reithmeier, E., 2016, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover. 2 p. (DGaO-Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  10. 2015
  11. Published

    Development of a compact low coherence interferometer based on GPGPU for fast microscopic surface measurement on turbine blades

    Li, Y., Kästner, M. & Reithmeier, E., 22 Jun 2015, Optical Measurement Systems for Industrial Inspection IX. Albertazzi G., A., Lehmann, P. & Osten, W. (eds.). SPIE, 7 p. 95250R. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9525).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  12. Published

    Endoscopic fringe projection for in-situ inspection of a sheet-bulk metal forming process

    Matthias, S., Kästner, M. & Reithmeier, E., 22 Jun 2015, Optical Measurement Systems for Industrial Inspection IX. Albertazzi G., A., Lehmann, P. & Osten, W. (eds.). SPIE, 8 p. 952513. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9525).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Evaluation of system models for an endoscopic fringe projection system

    Matthias, S., Kästner, M. & Reithmeier, E., 1 Jun 2015, In: Measurement. 73, p. 239-246 8 p., 3407.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Single image geometry inspection using inverse endoscopic fringe projection

    Matthias, S., Ohrt, C., Pösch, A., Kästner, M. & Reithmeier, E., Jun 2015, In: Acta IMEKO. 4, 2, p. 4-9 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    A method for multi-resolution characterization on porous surfaces by using a laser confocal scanning microscope

    Zou, Y., Kaestner, M. & Reithmeier, E., 27 May 2015, In: Optics and Lasers in Engineering. 74, p. 40-46 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Measuring systems for sheet-bulk metal forming

    Loderer, A., Timmermann, M., Matthias, S., Kästner, M., Schneider, T., Hausotte, T. & Reithmeier, E., 20 Mar 2015, Sheet Metal 2015. Merklein, M., Duflou, J., Leacock, A. G., Micari, F. & Hagenah, H. (eds.). p. 291-298 8 p. (Key Engineering Materials; vol. 639).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  17. Published

    High-precision surface measurement with an automated multiangle low coherence interferometer

    Li, Y., Kästner, M. & Reithmeier, E., 20 Feb 2015, In: Applied Optics. 54, 6, p. 1232-1240 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Characterization of porous surfaces with spatial point pattern analysis

    Zou, Y., Kästner, M. & Reithmeier, E., 6 Jan 2015, Photonics, Devices, and Systems VI. Senderakova, D., Tomanek, P., Tomanek, P., Pata, P. & Pata, P. (eds.). SPIE, 8 p. 94500B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9450).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    On the development of a low-cost rigid borescopic fringe projection system

    Schlobohm, J., Pösch, A., Kästner, M. & Reithmeier, E., 6 Jan 2015, Photonics, Devices, and Systems VI. Senderakova, D., Tomanek, P., Tomanek, P., Pata, P. & Pata, P. (eds.). SPIE, 6 p. 945009. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9450).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Camera and projector calibration of an endoscopic fringe projection system

    Matthias, S., Kästner, M. & Reithmeier, E., 2015, In: International Journal of Automation Technology. 9, 5

    Research output: Contribution to journal › Conference article › Research

  21. Published

    Compact Optical Sensor for the Measurement of Surface Microtopographies on Turbine Blades

    Li, Y., Kästner, M. & Reithmeier, E., 2015, Proceedings SENSOR 2015. p. 453-457

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  22. Published

    Gegenüberstellung zweier Messsysteme zur Geometrieerfassung mittels strukturierter Beleuchtung

    Matthias, S., Schlobohm, J., Kästner, M. & Reithmeier, E., 2015, Messunsicherheit praxisgerecht bestimmen und Prüfprozesse in der industriellen Praxis. Düsseldorf, p. 81-88

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Previous 1 2 3 4 5 6 7 8 ...10 Next