Publications
- Published
Mechanical surface treatment to obtain optically cooperative surfaces vis-à-vis fringe projection
Abo-Namous, O., Kästner, M., Reithmeier, E., Nicolaus, M., Möhwald, K. & Bach, F. W., 2 Sept 2010, Reflection, Scattering, and Diffraction from Surfaces II. 77920V. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7792).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Interior geometry inspection using rerouted fringe projection
Abo-Namous, O., Kästner, M. & Reithmeier, E., 23 Nov 2009, Fringe 2009: 6th International Workshop on Advanced Optical Metrology. p. 1-4 4 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Generierung optisch kooperativer Oberflächen für die Streifenprojektion
Abo-Namous, O., Kästner, M. & Reithmeier, E., 2009, Zweiter Workshop Optische Technologien: 17. November 2008 ; Tagungsband. Fahlbusch, T. (ed.). Garbsen, p. 175-177 3 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Fast method to measure optical cooperativity
Abo-Namous, O., Seewig, J., Kästner, M. & Reithmeier, E., 2008, DGaO Proceedings 2008. 2 p. A16. (DGaO Proceedings; vol. 109).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- E-pub ahead of print
Smart Rubber Extrusion Line Combining Multiple Sensor Techniques for AI-Based Process Control
Aschemann, A., Hagen, P. F., Albers, S., Rofallski, R., Schwabe, S., Dagher, M., Lukas, M., Leineweber, S., Klie, B., Schneider, P., Bossemeyer, H., Hinz, L., Kästner, M., Reitz, B., Reithmeier, E., Luhmann, T., Wackerbarth, H., Overmeyer, L. & Giese, U., 25 Oct 2024, (E-pub ahead of print) In: Advanced engineering materials.Research output: Contribution to journal › Article › Research › peer review
- Published
Non-contact geometry inspection of workpieces with optically non-cooperative surfaces
Bach, F. W., Möhwald, K., Nicolaus, M., Reithmeier, E., Kästner, M. & Abo-Namous, O., May 2010, Coatings in Manufacturing Engineering. p. 123-129 7 p. (Key Engineering Materials; vol. 438).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Berührungslose Geometrieprüfung endbearbeiteter Bauteile mit optisch nicht kooperativen Oberflächen
Bach, F., Möhwald, K., Nicolaus, M., Reithmeier, E., Kästner, M. & Abo-Namous, O., 2010, Tagungsband zum 13. Werkstofftechnischen Kolloquium in Chemnitz: 30. September und 01. Oktober 2010. Wielage, B. (ed.). Chemnitz, p. 313-317bach (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen; vol. 37).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Calibration routine for a telecentric stereo vision system considering affine mirror ambiguity
Beermann, R., Quentin, L., Kästner, M. & Reithmeier, E., 26 May 2020, In: Optical Engineering. 59, 5, 21 p., 054104.Research output: Contribution to journal › Article › Research › peer review
- Published
Structured light sensor with telecentric stereo camera pair for measurements through vacuum windows
Beermann, R., Quentin, L., Kästner, M. & Reithmeier, E., 21 Jun 2019, Optical Measurement Systems for Industrial Inspection XI. Lehmann, P., Osten, W. & Goncalves, A. A. (eds.). SPIE, Vol. 11056. 11 p. 1105614Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
2D refractive index field measurements in air in different pressure scenarios
Beermann, R., Quentin, L., Reithmeier, E. & Kästner, M., 2 Nov 2018, Optical Metrology and Inspection for Industrial Applications V. Yoshizawa, T., Zhang, S., Han, S. & Han, S. (eds.). SPIE, 8 p. 108190E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10819).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Full simulation model for laser triangulation measurement in an inhomogeneous refractive index field
Beermann, R., Quentin, L., Stein, G., Reithmeier, E. & Kästner, M., Nov 2018, In: Optical Engineering. 57, 11, 13 p., 114107.Research output: Contribution to journal › Article › Research › peer review
- Published
Fringe projection system for high-temperature workpieces–design, calibration, and measurement
Beermann, R., Quentin, L., Reithmeier, E. & Kästner, M., 20 May 2018, In: Applied Optics. 57, 15, p. 4075-4089 15 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement object
Beermann, R., Quentin, L., Pösch, A., Reithmeier, E. & Kästner, M., 9 May 2017, In: Applied Optics. 56, 14, p. 4168-4179 12 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Model-based calibration routine for a triangulation sensor for inner radius measurements of cylindrical components
Beermann, R., Bossemeyer, H., Diekmann, R., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). Bellingham: SPIE, 11 p. 113520S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Affine structured light sensor for measurements through inspection windows: basic concept and direct calibration approach
Beermann, R., Quentin, L., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 11 p. 113520E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Simulation of Light Deflection Due to an Inhomogeneous Refractive Index Field Induced by a Hot Measurement Object
Beermann, R., Quentin, L., Kästner, M., Pösch, A. & Reithmeier, E., 24 Aug 2017, Proceedings of the 118th Annual Meeting of DGaO: DGaO 06.-10. Juni 2017, Dresden, Deutschland. 2 p. (DGaO-Proceedings).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Brechungsindexbestimmung zur Umsetzung hochgenauer 3D-Messungen an warmen Tailored Forming-Bauteilen
Beermann, R., Quentin, L., Kästner, M., Pösch, A. & Reithmeier, E., 2017, Innovationspotenziale in der Umformtechnik: 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017. Behrens, B.-A. (ed.). GarbsenResearch output: Chapter in book/report/conference proceeding › Conference abstract › Research
- Published
Light section measurement to quantify the accuracy loss induced by laser light deflection in an inhomogeneous refractive index field
Beermann, R., Quentin, L., Pösch, A., Reithmeier, E. & Kästner, M., 26 Jun 2017, Optical Measurement Systems for Industrial Inspection X. Lehmann, P., Goncalves, A. A. & Osten, W. (eds.). SPIE, 7 p. 103292T. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10329).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Feiner Beitrag zur Effizienz
Behrens, B., Odening, D., Gillhaus, R., Kästner, M. & Reithmeier, E., 2009, In: Umformtechnik. 2009, 4, p. 28-29 2 p.Research output: Contribution to journal › Article › Research
- Published
Measurement techniques for precision forging
Bernard, M., Scheer, C., Reimche, W., Kästner, M., Seewig, J. & Reithmeier, E., Apr 2006, Wire, 56, 2, p. 48-52 5 p.Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer