Publications
2019
- Published
Metal forming tool monitoring based on a 3D measuring endoscope using CAD assisted registration
Hinz, L., Kästner, M. & Reithmeier, E., 1 May 2019, In: Sensors (Switzerland). 19, 9, 2084.Research output: Contribution to journal › Article › Research › peer review
2020
- Published
High-resolution inspection of tools for novel forming processes by an endoscopic fringe projection system
Hinz, L., Schulte, R., Kästner, M. & Reithmeier, E., 2020, 3D Image Acquisition and Display: Technology, Perception and Applications, 3D 2020. OSA - The Optical Society, DF3A.4Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Quantifizierung der Werkzeugkondition bei der Blechmassivumformung durch faseroptische Streifenprojektion
Hinz, L., Schulte, R., Pilz, F., Kästner, M. & Reithmeier, E., 2020, 4. Workshop Blechmassivumformung: Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen. Merklein, M., Behrens, B.-A. & Tekkaya, A. E. (eds.). Erlangen, p. 69-88 (DFG Sonderforschungsbereich /Transregio; vol. 73).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research
- Published
Adaptive merging of large datasets of a 3D measuring endoscope in an industrial environment
Hinz, L., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 14 p. 113520G. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
2021
- Published
A 3D Measuring Endoscope for Use in Sheet-Bulk Metal Forming: Design, Algorithms, Applications and Results
Hinz, L., Kästner, M. & Reithmeier, E., 2021, Sheet Bulk Metal Forming: Research Results of the TCRC73. 1 ed. p. 239-262 24 p. (Lecture Notes in Production Engineering).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
A New Method for Multi-Scale Fringe-Projection 3D Scanner Evaluation and for Modeling Surface Normal Dependent Influencing Factors of Local Phase Measurement Uncertainty
Hinz, L., Kästner, M. & Reithmeier, E., 2021, The 1st Sino-German workshop on intelligent sensing and metrology: Proceedings: 26-27 July, Hannover, Qingdao, online. Reithmeier, E. & Peng, X. (eds.).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Improved defect segmentation by combining fiber optic fringe projection profilometry with directional variable brightfield illumination
Hinz, L., Kästner, M. & Reithmeier, E., 2021, Emerging Digital Micromirror Device Based Systems and Applications XIII. Ehmke, J. & Lee, B. L. (eds.). SPIE, 116980S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11698).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming
Hinz, L., Metzner, S., Müller, P., Schulte, R., Besserer, H. B., Wackenrohr, S., Sauer, C., Kästner, M., Hausotte, T., Hübner, S., Nürnberger, F., Schleich, B., Behrens, B. A., Wartzack, S., Merklein, M. & Reithmeier, E., 30 Mar 2021, In: Sensors. 21, 7, 31 p., 2389.Research output: Contribution to journal › Article › Research › peer review
- Published
Adaptive camera calibration for a focus adjustable liquid lens in fiber optic endoscopy
Hinz, L., Kästner, M. & Reithmeier, E., 18 Apr 2021, Nonlinear Optics and Applications XII. Bertolotti, M., Zayats, A. V. & Zheltikov, A. M. (eds.). SPIE, 1177014. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11770).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Impact of multireflections on measurement accuracy in the endoscopic 3D reconstruction of gearing geometries
Hinz, L., Kästner, M. & Reithmeier, E., 20 Jun 2021, Optical Measurement Systems for Industrial Inspection XII. Lehmann, P., Osten, W. & Goncalves, A. A. (eds.). SPIE, 117821D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11782).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
2022
- Published
Damage segmentation using small convolutional neuronal networks and adversarial training methods on low-quality RGB video data
Hedrich, K., Hinz, L. & Reithmeier, E., 2022, Proc. SPIE 12019, AI and Optical Data Sciences III. Jalali, B. & Kitayama, K.-I. (eds.). 1201902. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12019).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
In-situ 3D Endoscopy based on Fiber-Optic Fringe Projection Profilometry in Production Metrology
Hinz, L., 2022, Hannover. 224 p.Research output: Thesis › Doctoral thesis
- Published
Increasing optical pose estimation accuracy via freeform design and its application to hand-eye calibration
Melchert, N. F., Hinz, L., Schindlbeck, C. A. & Reithmeier, E., 14 Apr 2022, In: Optics Express. 30, 9, p. 14368-14383 16 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Pose Estimation and Damage Characterization of Turbine Blades during Inspection Cycles and Component-Protective Disassembly Processes
Middendorf, P., Hinz, L., Blümel, R., Raatz, A., Kästner, M. & Reithmeier, E., 11 Jul 2022, In: Sensors. 22, 14, 5191.Research output: Contribution to journal › Article › Research › peer review
- Published
GPU implementation of FSR simulations: performance improvements and limitations
Melchert, N. F., Hinz, L., Reithmeier, E. & Degallaix, J., 3 Oct 2022, Optics and Photonics for Information Processing XVI. Awwal, A. A. S., Iftekharuddin, K. M. & Diaz-Ramirez, V. H. (eds.). SPIE, 9 p. 122250E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12225).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Pose estimation of optical resonators using convolutional neural networks in a simulation environment
Melchert, N. F., Hedrich, K., Wiese, L. V., Hinz, L. & Reithmeier, E., 3 Oct 2022, Optical System Alignment, Tolerancing, and Verification XIV. Sasian, J. & Youngworth, R. N. (eds.). SPIE, 8 p. 122220D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12222).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
2023
- Published
Schwerpunktprogramm der DFG: Datengetriebene Prozessmodellierung in der Umformtechnik: Einrichtassistenzsystem für Transferpressen
Krimm, R., Hinz, L., Nagel, M. & Scheu, J., 2023, In: WT Werkstattstechnik. 113, 10, p. 401-406 6 p.Research output: Contribution to journal › Review article › Research › peer review
- Published
Damage Segmentation on High-Resolution Coating Images Using a Novel Two-Stage Network Pipeline
Hedrich, K., Hinz, L. & Reithmeier, E., 2 Mar 2023, In: Aerospace. 10, 3, 245.Research output: Contribution to journal › Article › Research › peer review
- Published
Creepage Distance Estimation of Hairpin Stators Using 3D Feature Extraction
Grambow, N., Hinz, L., Bonk, C., Krüger, J. & Reithmeier, E., 8 May 2023, In: Metrology. 3, 2, p. 169-185 17 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Improved segmentation of damages on high-resolution coating images using CNN-based ensemble learning
Hedrich, K., Hinz, L. & Reithmeier, E., 11 Aug 2023.Research output: Contribution to conference › Abstract › Research