Loading [MathJax]/extensions/tex2jax.js
Profile picture not found

Dr.  Kai Brunotte

https://orcid.org/0000-0002-2777-3498
41 - 75 out of 75Page size: 40
Order:

Publications

  1. 2021

  2. Published

    Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulation

    Behrens, B. ‐. A., Brunotte, K., Wester, H. & Kock, C., Aug 2021, In: Archive of applied mechanics. 91, 8, p. 3579-3602 24 p.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes

    Behrens, B., Brunotte, K., Hübner, S., Wester, H., Müller, F., Müller, P., Wälder, J. & Matthias, T., 13 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5, 2, 36.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Adjusting Mechanical Properties of Forging Dies Produced by Ausforming

    Behrens, B. A., Brunotte, K., Petersen, T., Ostermeyer, C. & Till, M., 2 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 2697

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Investigations on Residual Stresses within Hot-Bulk-Formed Components Using Process Simulation and the Contour Method

    Behrens, B. A., Gibmeier, J., Brunotte, K., Wester, H., Simon, N. & Kock, C., 31 Mar 2021, In: Metals. 11, 4, 566.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    Investigation on the Microstructure of ECAP-Processed Iron-Aluminium Alloys

    Behrens, B. A., Brunotte, K., Petersen, T. & Relge, R., 5 Jan 2021, In: MATERIALS. 14, 1, 10 p., 219.

    Research output: Contribution to journal › Article › Research › peer review

  8. Published

    Beitrag zur Steigerung der Standmenge von Werkzeugen der Warmmassivumformung durch den Einsatz lokaler belastungsangepasster Verschleißschutzbehandlungen

    Brunotte, K., 2021, Garbsen.

    Research output: Thesis › Doctoral thesis

  9. Published

    Experimental Process Design for Reclamation of Geared Components

    Kuwert, P., Petersen, T., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 125-133 9 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  10. Published

    Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength Steels

    Behrens, B. A., Brunotte, K., Wester, H. & Dykiert, M., 2021, In: Key Engineering Material:KEM. 883, p. 294-302 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  11. Published

    Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component

    Rosenbusch, D., Müller, P., Hübner, S., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 23-33 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  12. Published

    Investigation on Noise Reduction During Cutting of High-Strength Materials Based on Machine Acoustic Simulation

    Friesen, D., Krimm, R., Fries, S., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 45-55 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  13. Published

    The Effects of Press Ram Vibrations on the Production Quality

    Behrens, B., Brunotte, K., Krimm, R. & Commichau, O., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). p. 2609-2618 10 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. 2020

  15. Published

    Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer Degradation

    Behrens, B. A., Brunotte, K., Wester, H., Rothgänger, M. & Müller, F., 29 Dec 2020, In: MATERIALS. 14, 1, p. 1-16 16 p., 104.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Mechanical and Thermal Influences on Microstructural and Mechanical Properties during Process-Integrated Thermomechanically Controlled Forging of Tempering Steel AISI 4140

    Behrens, B. A., Brunotte, K., Petersen, T. & Diefenbach, J., 17 Dec 2020, In: MATERIALS. 13, 24, p. 1-13 13 p., 5772.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Microstructure and Mechanical Properties of Thermomechanically Forged Tempering Steel 42CrMo4

    Diefenbach, J., Brunotte, K. & Behrens, B., 25 Sept 2020, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Behrens, B.-A., Brosius, A., Hintze, W., Ihlenfeldt, S. & Wulfsberg, J. P. (eds.). p. 142-150 9 p. (Lecture Notes in Production Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Transfer

  18. Published

    Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the component

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 4 Sept 2020, In: Procedia Manufacturing. 50, p. 706-712 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  19. Published

    Analysis of alloy influence on the joint formation in compound forging of geared steel-aluminium components

    Behrens, B. A., Brunotte, K. & Kuwert, P., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 190-195 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Investigation Of The Process Window For Deformation Induced Ferrite To Improve The Joinability Of Press-Hardened Components

    Behrens, B. A., Brunotte, K., Wester, H. & Stockburger, E., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 579-584 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  21. Published

    Manufacturing Of High-Performance Forging Dies By Ausforming

    Behrens, B. A., Brunotte, K. & Till, M., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 203-208 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. Published

    Numerical Service Life Calculation Of Forming Tools During Thixoforging Using The Sehitoglu Model

    Behrens, B. A., Brunotte, K., Wester, H., Zaitsev, A. & Hootak, M., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 320-326 7 p. (METAL Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Published

    Practical Process Characterisation For Hot-Stamping Regarding The Heat Transfer Coefficient Using A Numerical And Experimental Coupled Method

    Behrens, B. A., Brunotte, K., Wester, H. & Müller, F., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 573-578 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  24. Published

    A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging Processes

    Behrens, B. A., Volk, W., Maier, D., Scandola, L., Ott, M., Brunotte, K., Büdenbender, C. & Till, M., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 295-300 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  25. Published

    Extension of the Conventional Press Hardening Process by Local Material Influence to Improve Joining Ability

    Behrens, B. A., Jüttner, S., Brunotte, K., Özkaya, F., Wohner, M. & Stockburger, E., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 1345-1352 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  26. Published

    Concept of a control system based on 3D geometry measurement for open die forging of large-scale components

    Quentin, L., Beermann, R., Brunotte, K., Behrens, B., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 8 p. 113520B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  27. Published

    Porosity in hot formed cast steel

    Behrens, B. A., Ursinus, J., Büdenbender, C., Brunotte, K., Nürnberger, F., Demler, E. & Maier, H. J., 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 283-288 6 p. (International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  28. 2019

  29. Published

    Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming: Untersuchung der Grenzformänderung martensitischer Chromstähle für die Warmblechumformung

    Stockburger, E., Wester, H., Uhe, J., Brunotte, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. p. 159-168 10 p. Chapter 16

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  30. Published

    Shearing of Aluminium Rods for the Production of Billets for Bulk Metal Forming Operations

    Behrens, B., Brunotte, K. & Lippold, L., 18 Sept 2019, Advances in Materials, Mechanics and Manufacturing: Proceedings of the 2nd International Conference on Advanced Materials, Mechanics and Manufacturing, A3M 2018. Chaari, F., Barkallah, M., Zouari, B., Haddar, M., Khabou, M. T., Bouguecha, A. & Kchaou, M. (eds.). 1. ed. Springer Nature, p. 133-141 9 p. (Lecture Notes in Mechanical Engineering (LNME)).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  31. 2018

  32. Published

    Adapted diffusion processes for effective forging dies

    Paschke, H., Nienhaus, A., Brunotte, K., Petersen, T., Siegmund, M., Lippold, L., Weber, M., Mejauschek, M., Landgraf, P., Braeuer, G., Behrens, B. A. & Lampke, T., 3 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). 040016. (AIP Conference Proceedings; vol. 1960).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  33. Published

    Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical Components

    Behrens, B. A., Brunotte, K. & Bohr, D., 24 Apr 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). p. 163-170 8 p. (Key Engineering Materials; vol. 767 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  34. Published

    Ecological lubrication in cold forming of sintered powder metallurgical components

    Behrens, B., Brunotte, K. & Bohr, D., 15 Mar 2018, In: Dry Metal Forming Open Access Journal (DMFOAJ). 4 - 2018, p. 68-73 6 p.

    Research output: Contribution to journal › Article › Research

  35. Published

    Adaptations in diffusion treatments enable the tool life time enhancement of forging dies

    Paschke, H., Mejauschek, M., Weber, M., Brunotte, K., Siegmund, M., Lippold, L., Lenz, D., Behrens, B. & Dueltgen, P., 2018.

    Research output: Contribution to conference › Abstract › Research

  36. Published

    Optimised impregnation parameters of self-lubricating powder metallurgical components for cold bulk forming

    Behrens, B. A., Brunotte, K. & Bohr, D., 2018, METAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings. p. 242-248 7 p. (METAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  37. 2016

  38. Published

    Influence of heat pipe cooling on the wear of hot forging dies

    Behrens, B. A., Puppa, J., Huskic, A., Brunotte, K., Bouguecha, A. & Prüß, T., 23 Sept 2016, In: Production Engineering. 10, 6, p. 599-606 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Reprocessing of aluminum chips by hot backward extrusion

    Behrens, B. A., Bouguecha, A., Brunotte, K., Dannenberg, M., Huskic, A. & Bonhage, M., 18 Jun 2016, In: Production Engineering. 10, 4-5, p. 375-382 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. 2015

  41. Published

    Adapted surface properties of hot forging tools using plasma technology for an effective wear reduction

    Paschke, H., Yilkiran, T., Lippold, L., Brunotte, K., Weber, M., Braeuer, G. & Behrens, B. A., 6 Jun 2015, In: WEAR. 330-331, p. 429-438 10 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 Next