Publications
- 2023
- Published
Carbon Footprint Tool zur Messung und Erfassung von Halbzeug-und Werkzeugtemperaturen: Big Data in der Massivumformung
Ortlieb, E., Müller, F., Peddinghaus, S., Peddinghaus, J., Wester, H., Rothgänger, M., Monke, H., Raible, J., Huber, M. & Brunotte, K., 2023, In: WT Werkstattstechnik. 113, 10, p. 419-424 6 p.Research output: Contribution to journal › Article › Research › peer review
- 2022
- Published
Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes
Behrens, B. A., Brunotte, K., Wester, H., Lorenz, U. & Müller, F., 13 Oct 2022, In: MATERIALS. 15, 20, 7105.Research output: Contribution to journal › Article › Research › peer review
- Published
Load-Adapted Surface Modifications to Increase Lifetime of Forging Dies
Paschke, H., Weber, M., Brunotte, K., Rothgänger, M., Petersen, T., Siegmund, M. & Peddinghaus, J., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1178-1187 10 p. (Key Engineering Materials; vol. 926 KEM).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes
Behrens, B. A., Brunotte, K., Wester, H., Peddinghausen, J. & Till, M., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 250-255 6 p. (METAL Conference Proeedings).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Influence of cooling parameters on the surface layer structure of hot working tools
Behrens, B. A., Brunotte, K., Peddinghaus, J. & Lorenz, U., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 233-238 6 p. (International Conference on Metallurgy and Materials).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Influence of the connection between forming die and heatpipe on the heat transfer
Behrens, B. A., Brunotte, K., Peddinghaus, J. & Laeger, R., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 227-232 6 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Influence of the microstructure on flow stress and deformability of iron-aluminium alloys
Peddinghaus, J., Brunotte, K., Wester, H., Till, M., Kock, C. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 199-204 6 p. (Proceedings International Conference on Metallurgy and Materials ).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Investigations on the consolidation of TNM powder by admixing different elemental powders
Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 639-644 6 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Influence of dwell time and pressure on SPS process with titanium Aluminides
Behrens, B. A., Brunotte, K., Peddinghaus, J. & Heymann, A., 4 Jan 2022, In: Metals. 12, 1, 83.Research output: Contribution to journal › Article › Research › peer review
- Published
Clinching of Heated Aluminum Die Casting
Yarcu, S., Huebner, S., Yilkiran, D., Brunotte, K., Behrens, B. A., Schuchardt, T., Mueller, S. & Dilger, K., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 85-93 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting
Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.Research output: Contribution to conference › Paper › Research › peer review
- Published
Influence of Friction-Reducing Powder-Compaction Tool Coatings on Green-Compact Properties
Bohr, D., Petersen, T., Brunotte, K. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 349-356 8 p. (Lecture Notes in Production Engineering; vol. Part F1160).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
In-Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection
Middendorf, P., Rothgänger, M., Peddinghaus, J., Brunotte, K., Uhe, J., Behrens, B. A., Quentin, L., Kästner, M. & Reithmeier, E., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1211-1220 10 p. (Key Engineering Materials; vol. 926 KEM).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes
Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 547-558 12 p. (Key Engineering Materials; vol. 926 KEM).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Tailored Forming: Drucküberlagertes Warmfließpressen: Prozesskette zur Herstellung hybrider Hochleistungsbauteile
Piwek, A., Uhe, J., Peddinghaus, J. & Brunotte, K., 2022, In: WT Werkstattstechnik. 112, 10, p. 671-676 6 p.Research output: Contribution to journal › Article › Research › peer review
- 2021
- Published
Investigation of pressing and ejection performance of friction-reducing powder-compaction tool coatings
Behrens, B. A., Brunotte, K., Petersen, T. & Bohr, D., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 759-765 7 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Transfer of ausforming parameters to scaled forging tools
Behrens, B. A., Brunotte, K., Petersen, T., Relge, R. & Till, M., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 247-252 6 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala
Behrens, B. A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S. & Kock, C., Sept 2021, In: Forschung im Ingenieurwesen/Engineering Research. 85, 3, p. 757–771 15 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulation
Behrens, B. ‐. A., Brunotte, K., Wester, H. & Kock, C., Aug 2021, In: Archive of applied mechanics. 91, 8, p. 3579-3602 24 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems
Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.Research output: Contribution to journal › Article › Research › peer review