Loading [MathJax]/extensions/tex2jax.js
Profile picture not found

Dr.  Kai Brunotte

https://orcid.org/0000-0002-2777-3498
1 - 40 out of 75Page size: 40
Order:

Publications

  1. 2025

  2. E-pub ahead of print

    Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components

    Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  3. 2024

  4. E-pub ahead of print

    Intermetallic Compound Layer Morphology and Distribution in Friction-Welded Steel–Aluminum Components

    Kahra, C., Piwek, A., Peddinghaus, J., Brunotte, K., Maier, H. J., Nürnberger, F. & Herbst, S., 10 Oct 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

    Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Effect of different oxide layer shares on the upsetting of titanium aluminide specimens

    Döring, S., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 958-967 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium

    Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Isothermes und sauerstofffreies Umformen von Titan/Study on the isothermal and oxygen-free forming of encapsulated semi-finished titanium parts

    Möckelmann, J., Siring, J., Peddinghaus, J., Wester, H., Brunotte, K. & Behrens, B., 2024, In: wt Werkstattstechnik online. 114, 10, p. 578-587 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Prevention of scaling by means of recycled process waste gases

    Gerke, N., Peddinghaus, J., Rosenbusch, D., Uhe, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 861-870 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  12. Published

    Using computer vision to analyse fracture strains of oxide scale layers on a macro level

    Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. 2023

  14. Published

    Prozessoptimierung mittels Inline-Geometriemessung

    Kern, P., Hinz, L., Kästner, M., Reithmeier, E., Blankemeyer, S., Ince, C., Raatz, A., Behrens, B., Brunotte, K. & Uhe, J., 7 Dec 2023, In: wt Werkstattstechnik online. 113, 10, p. 413-418 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  16. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  17. Published

    Metal-Containing Diamond-Like Carbon Coatings with Increased Temperature Stability for Wear Protection of Nitrided Hot Forging Dies

    Behrens, B. A., Bräuer, G., Brunotte, K., Peddinghaus, J., Rothgänger, M., Uhe, J., Kipp, C. & Siegmund, M., 27 Sept 2023, In: Materials Science Forum. 1097, p. 51-60

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Tool Surface Degradation and Adhesion in Aluminium Forging

    Peddinghaus, J., Paschke, H., Brunotte, K. & Behrens, B. A., 27 Sept 2023, In: Materials Science Forum. 1097, p. 41-49

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere

    Behrens, B., Brunotte, K., Peddinghaus, J., Ursinus, J., Döring, S., Maus-Friedrichs, W., Gustus, R. & Szafarska, M., 19 Sept 2023, In: Journal of Manufacturing and Materials Processing. 7, 5, 171.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Monitoring of freezing patterns within 3D collagen-hydroxyapatite scaffolds using infrared thermography

    Mutsenko, V., Anastassopoulos, E., Zaragotas, D., Simaioforidou, A., Tarusin, D., Lauterboeck, L., Sydykov, B., Brunotte, R., Brunotte, K., Rozanski, C., Petrenko, A. Y., Braslavsky, I., Glasmacher, B. & Gryshkov, O., Jun 2023, In: CRYOBIOLOGY. 111, p. 57-69 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Hot die forging with nitrided and thermally stabilized DLC coated tools

    Siegmund, M., Kipp, C., Peddinghaus, J., Brunotte, K., Bräuer, G. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 583-590 8 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. Published

    Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling

    Piwek, A., Peddinghaus, J., Uhe, J., Brunotte, K. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 591-600 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Published

    Microstructure analysis of hybrid aluminum parts from recycled EN AW-6082 and EN AW-7075 chips

    Ursinus, J., Koch, A., Brunotte, K., Walther, F. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 1977-1986 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  24. Published

    Investigation on Adhesion-Promoting Process Parameters in Steel Bulk Metal Forming

    Lorenz, U., Brunotte, K., Peddinghaus, J. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 91-99 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  25. Published

    Study on the Compressibility of TiAl48-2-2 Powder Mixed with Elemental Powders

    Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 13-23 11 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  26. Published

    Carbon Footprint Tool zur Messung und Erfassung von Halbzeug-und Werkzeugtemperaturen: Big Data in der Massivumformung

    Ortlieb, E., Müller, F., Peddinghaus, S., Peddinghaus, J., Wester, H., Rothgänger, M., Monke, H., Raible, J., Huber, M. & Brunotte, K., 2023, In: WT Werkstattstechnik. 113, 10, p. 419-424 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  27. 2022

  28. Published

    Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H., Lorenz, U. & Müller, F., 13 Oct 2022, In: MATERIALS. 15, 20, 7105.

    Research output: Contribution to journal › Article › Research › peer review

  29. Published

    Load-Adapted Surface Modifications to Increase Lifetime of Forging Dies

    Paschke, H., Weber, M., Brunotte, K., Rothgänger, M., Petersen, T., Siegmund, M. & Peddinghaus, J., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1178-1187 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  30. Published

    Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes

    Behrens, B. A., Brunotte, K., Wester, H., Peddinghausen, J. & Till, M., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 250-255 6 p. (METAL Conference Proeedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  31. Published

    Influence of cooling parameters on the surface layer structure of hot working tools

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Lorenz, U., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 233-238 6 p. (International Conference on Metallurgy and Materials).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  32. Published

    Influence of the connection between forming die and heatpipe on the heat transfer

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Laeger, R., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 227-232 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  33. Published

    Influence of the microstructure on flow stress and deformability of iron-aluminium alloys

    Peddinghaus, J., Brunotte, K., Wester, H., Till, M., Kock, C. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 199-204 6 p. (Proceedings International Conference on Metallurgy and Materials ).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  34. Published

    Investigations on the consolidation of TNM powder by admixing different elemental powders

    Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 639-644 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  35. Published

    Influence of dwell time and pressure on SPS process with titanium Aluminides

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Heymann, A., 4 Jan 2022, In: Metals. 12, 1, 83.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    Clinching of Heated Aluminum Die Casting

    Yarcu, S., Huebner, S., Yilkiran, D., Brunotte, K., Behrens, B. A., Schuchardt, T., Mueller, S. & Dilger, K., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 85-93 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  37. Published

    Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting

    Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.

    Research output: Contribution to conference › Paper › Research › peer review

  38. Published

    Influence of Friction-Reducing Powder-Compaction Tool Coatings on Green-Compact Properties

    Bohr, D., Petersen, T., Brunotte, K. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 349-356 8 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  39. Published

    In-Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection

    Middendorf, P., Rothgänger, M., Peddinghaus, J., Brunotte, K., Uhe, J., Behrens, B. A., Quentin, L., Kästner, M. & Reithmeier, E., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1211-1220 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  40. Published

    Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 547-558 12 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  41. Published

    Tailored Forming: Drucküberlagertes Warmfließpressen: Prozesskette zur Herstellung hybrider Hochleistungsbauteile

    Piwek, A., Uhe, J., Peddinghaus, J. & Brunotte, K., 2022, In: WT Werkstattstechnik. 112, 10, p. 671-676 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  42. 2021

  43. Published

    Investigation of pressing and ejection performance of friction-reducing powder-compaction tool coatings

    Behrens, B. A., Brunotte, K., Petersen, T. & Bohr, D., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 759-765 7 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  44. Published

    Transfer of ausforming parameters to scaled forging tools

    Behrens, B. A., Brunotte, K., Petersen, T., Relge, R. & Till, M., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 247-252 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  45. Published

    Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala

    Behrens, B. A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S. & Kock, C., Sept 2021, In: Forschung im Ingenieurwesen/Engineering Research. 85, 3, p. 757–771 15 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 Next