Loading [MathJax]/extensions/tex2jax.js
Profile picture not found

Dr.  Kai Brunotte

https://orcid.org/0000-0002-2777-3498
1 - 75 out of 75Page size: 160
Order:

Publications

  1. 2025

  2. E-pub ahead of print

    Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components

    Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  3. 2024

  4. E-pub ahead of print

    Intermetallic Compound Layer Morphology and Distribution in Friction-Welded Steel–Aluminum Components

    Kahra, C., Piwek, A., Peddinghaus, J., Brunotte, K., Maier, H. J., Nürnberger, F. & Herbst, S., 10 Oct 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

    Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Effect of different oxide layer shares on the upsetting of titanium aluminide specimens

    Döring, S., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 958-967 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium

    Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Isothermes und sauerstofffreies Umformen von Titan/Study on the isothermal and oxygen-free forming of encapsulated semi-finished titanium parts

    Möckelmann, J., Siring, J., Peddinghaus, J., Wester, H., Brunotte, K. & Behrens, B., 2024, In: wt Werkstattstechnik online. 114, 10, p. 578-587 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Prevention of scaling by means of recycled process waste gases

    Gerke, N., Peddinghaus, J., Rosenbusch, D., Uhe, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 861-870 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  12. Published

    Using computer vision to analyse fracture strains of oxide scale layers on a macro level

    Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. 2023

  14. Published

    Prozessoptimierung mittels Inline-Geometriemessung

    Kern, P., Hinz, L., Kästner, M., Reithmeier, E., Blankemeyer, S., Ince, C., Raatz, A., Behrens, B., Brunotte, K. & Uhe, J., 7 Dec 2023, In: wt Werkstattstechnik online. 113, 10, p. 413-418 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  16. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  17. Published

    Metal-Containing Diamond-Like Carbon Coatings with Increased Temperature Stability for Wear Protection of Nitrided Hot Forging Dies

    Behrens, B. A., Bräuer, G., Brunotte, K., Peddinghaus, J., Rothgänger, M., Uhe, J., Kipp, C. & Siegmund, M., 27 Sept 2023, In: Materials Science Forum. 1097, p. 51-60

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Tool Surface Degradation and Adhesion in Aluminium Forging

    Peddinghaus, J., Paschke, H., Brunotte, K. & Behrens, B. A., 27 Sept 2023, In: Materials Science Forum. 1097, p. 41-49

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere

    Behrens, B., Brunotte, K., Peddinghaus, J., Ursinus, J., Döring, S., Maus-Friedrichs, W., Gustus, R. & Szafarska, M., 19 Sept 2023, In: Journal of Manufacturing and Materials Processing. 7, 5, 171.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Monitoring of freezing patterns within 3D collagen-hydroxyapatite scaffolds using infrared thermography

    Mutsenko, V., Anastassopoulos, E., Zaragotas, D., Simaioforidou, A., Tarusin, D., Lauterboeck, L., Sydykov, B., Brunotte, R., Brunotte, K., Rozanski, C., Petrenko, A. Y., Braslavsky, I., Glasmacher, B. & Gryshkov, O., Jun 2023, In: CRYOBIOLOGY. 111, p. 57-69 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Hot die forging with nitrided and thermally stabilized DLC coated tools

    Siegmund, M., Kipp, C., Peddinghaus, J., Brunotte, K., Bräuer, G. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 583-590 8 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. Published

    Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling

    Piwek, A., Peddinghaus, J., Uhe, J., Brunotte, K. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 591-600 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Published

    Microstructure analysis of hybrid aluminum parts from recycled EN AW-6082 and EN AW-7075 chips

    Ursinus, J., Koch, A., Brunotte, K., Walther, F. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 1977-1986 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  24. Published

    Investigation on Adhesion-Promoting Process Parameters in Steel Bulk Metal Forming

    Lorenz, U., Brunotte, K., Peddinghaus, J. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 91-99 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  25. Published

    Study on the Compressibility of TiAl48-2-2 Powder Mixed with Elemental Powders

    Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 13-23 11 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  26. Published

    Carbon Footprint Tool zur Messung und Erfassung von Halbzeug-und Werkzeugtemperaturen: Big Data in der Massivumformung

    Ortlieb, E., Müller, F., Peddinghaus, S., Peddinghaus, J., Wester, H., Rothgänger, M., Monke, H., Raible, J., Huber, M. & Brunotte, K., 2023, In: WT Werkstattstechnik. 113, 10, p. 419-424 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  27. 2022

  28. Published

    Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H., Lorenz, U. & Müller, F., 13 Oct 2022, In: MATERIALS. 15, 20, 7105.

    Research output: Contribution to journal › Article › Research › peer review

  29. Published

    Load-Adapted Surface Modifications to Increase Lifetime of Forging Dies

    Paschke, H., Weber, M., Brunotte, K., Rothgänger, M., Petersen, T., Siegmund, M. & Peddinghaus, J., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1178-1187 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  30. Published

    Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes

    Behrens, B. A., Brunotte, K., Wester, H., Peddinghausen, J. & Till, M., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 250-255 6 p. (METAL Conference Proeedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  31. Published

    Influence of cooling parameters on the surface layer structure of hot working tools

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Lorenz, U., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 233-238 6 p. (International Conference on Metallurgy and Materials).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  32. Published

    Influence of the connection between forming die and heatpipe on the heat transfer

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Laeger, R., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 227-232 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  33. Published

    Influence of the microstructure on flow stress and deformability of iron-aluminium alloys

    Peddinghaus, J., Brunotte, K., Wester, H., Till, M., Kock, C. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 199-204 6 p. (Proceedings International Conference on Metallurgy and Materials ).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  34. Published

    Investigations on the consolidation of TNM powder by admixing different elemental powders

    Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 639-644 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  35. Published

    Influence of dwell time and pressure on SPS process with titanium Aluminides

    Behrens, B. A., Brunotte, K., Peddinghaus, J. & Heymann, A., 4 Jan 2022, In: Metals. 12, 1, 83.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    Clinching of Heated Aluminum Die Casting

    Yarcu, S., Huebner, S., Yilkiran, D., Brunotte, K., Behrens, B. A., Schuchardt, T., Mueller, S. & Dilger, K., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 85-93 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  37. Published

    Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting

    Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.

    Research output: Contribution to conference › Paper › Research › peer review

  38. Published

    Influence of Friction-Reducing Powder-Compaction Tool Coatings on Green-Compact Properties

    Bohr, D., Petersen, T., Brunotte, K. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 349-356 8 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  39. Published

    In-Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection

    Middendorf, P., Rothgänger, M., Peddinghaus, J., Brunotte, K., Uhe, J., Behrens, B. A., Quentin, L., Kästner, M. & Reithmeier, E., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1211-1220 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  40. Published

    Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 547-558 12 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  41. Published

    Tailored Forming: Drucküberlagertes Warmfließpressen: Prozesskette zur Herstellung hybrider Hochleistungsbauteile

    Piwek, A., Uhe, J., Peddinghaus, J. & Brunotte, K., 2022, In: WT Werkstattstechnik. 112, 10, p. 671-676 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  42. 2021

  43. Published

    Investigation of pressing and ejection performance of friction-reducing powder-compaction tool coatings

    Behrens, B. A., Brunotte, K., Petersen, T. & Bohr, D., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 759-765 7 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  44. Published

    Transfer of ausforming parameters to scaled forging tools

    Behrens, B. A., Brunotte, K., Petersen, T., Relge, R. & Till, M., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 247-252 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  45. Published

    Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala

    Behrens, B. A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S. & Kock, C., Sept 2021, In: Forschung im Ingenieurwesen/Engineering Research. 85, 3, p. 757–771 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  46. Published

    Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulation

    Behrens, B. ‐. A., Brunotte, K., Wester, H. & Kock, C., Aug 2021, In: Archive of applied mechanics. 91, 8, p. 3579-3602 24 p.

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes

    Behrens, B., Brunotte, K., Hübner, S., Wester, H., Müller, F., Müller, P., Wälder, J. & Matthias, T., 13 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5, 2, 36.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Adjusting Mechanical Properties of Forging Dies Produced by Ausforming

    Behrens, B. A., Brunotte, K., Petersen, T., Ostermeyer, C. & Till, M., 2 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 2697

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  50. Published

    Investigations on Residual Stresses within Hot-Bulk-Formed Components Using Process Simulation and the Contour Method

    Behrens, B. A., Gibmeier, J., Brunotte, K., Wester, H., Simon, N. & Kock, C., 31 Mar 2021, In: Metals. 11, 4, 566.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Investigation on the Microstructure of ECAP-Processed Iron-Aluminium Alloys

    Behrens, B. A., Brunotte, K., Petersen, T. & Relge, R., 5 Jan 2021, In: MATERIALS. 14, 1, 10 p., 219.

    Research output: Contribution to journal › Article › Research › peer review

  52. Published

    Beitrag zur Steigerung der Standmenge von Werkzeugen der Warmmassivumformung durch den Einsatz lokaler belastungsangepasster Verschleißschutzbehandlungen

    Brunotte, K., 2021, Garbsen.

    Research output: Thesis › Doctoral thesis

  53. Published

    Experimental Process Design for Reclamation of Geared Components

    Kuwert, P., Petersen, T., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 125-133 9 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  54. Published

    Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength Steels

    Behrens, B. A., Brunotte, K., Wester, H. & Dykiert, M., 2021, In: Key Engineering Material:KEM. 883, p. 294-302 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  55. Published

    Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component

    Rosenbusch, D., Müller, P., Hübner, S., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 23-33 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  56. Published

    Investigation on Noise Reduction During Cutting of High-Strength Materials Based on Machine Acoustic Simulation

    Friesen, D., Krimm, R., Fries, S., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 45-55 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  57. Published

    The Effects of Press Ram Vibrations on the Production Quality

    Behrens, B., Brunotte, K., Krimm, R. & Commichau, O., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). p. 2609-2618 10 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  58. 2020

  59. Published

    Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer Degradation

    Behrens, B. A., Brunotte, K., Wester, H., Rothgänger, M. & Müller, F., 29 Dec 2020, In: MATERIALS. 14, 1, p. 1-16 16 p., 104.

    Research output: Contribution to journal › Article › Research › peer review

  60. Published

    Mechanical and Thermal Influences on Microstructural and Mechanical Properties during Process-Integrated Thermomechanically Controlled Forging of Tempering Steel AISI 4140

    Behrens, B. A., Brunotte, K., Petersen, T. & Diefenbach, J., 17 Dec 2020, In: MATERIALS. 13, 24, p. 1-13 13 p., 5772.

    Research output: Contribution to journal › Article › Research › peer review

  61. Published

    Microstructure and Mechanical Properties of Thermomechanically Forged Tempering Steel 42CrMo4

    Diefenbach, J., Brunotte, K. & Behrens, B., 25 Sept 2020, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Behrens, B.-A., Brosius, A., Hintze, W., Ihlenfeldt, S. & Wulfsberg, J. P. (eds.). p. 142-150 9 p. (Lecture Notes in Production Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Transfer

  62. Published

    Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the component

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 4 Sept 2020, In: Procedia Manufacturing. 50, p. 706-712 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  63. Published

    Analysis of alloy influence on the joint formation in compound forging of geared steel-aluminium components

    Behrens, B. A., Brunotte, K. & Kuwert, P., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 190-195 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  64. Published

    Investigation Of The Process Window For Deformation Induced Ferrite To Improve The Joinability Of Press-Hardened Components

    Behrens, B. A., Brunotte, K., Wester, H. & Stockburger, E., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 579-584 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  65. Published

    Manufacturing Of High-Performance Forging Dies By Ausforming

    Behrens, B. A., Brunotte, K. & Till, M., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 203-208 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  66. Published

    Numerical Service Life Calculation Of Forming Tools During Thixoforging Using The Sehitoglu Model

    Behrens, B. A., Brunotte, K., Wester, H., Zaitsev, A. & Hootak, M., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 320-326 7 p. (METAL Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  67. Published

    Practical Process Characterisation For Hot-Stamping Regarding The Heat Transfer Coefficient Using A Numerical And Experimental Coupled Method

    Behrens, B. A., Brunotte, K., Wester, H. & Müller, F., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 573-578 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  68. Published

    A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging Processes

    Behrens, B. A., Volk, W., Maier, D., Scandola, L., Ott, M., Brunotte, K., Büdenbender, C. & Till, M., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 295-300 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  69. Published

    Extension of the Conventional Press Hardening Process by Local Material Influence to Improve Joining Ability

    Behrens, B. A., Jüttner, S., Brunotte, K., Özkaya, F., Wohner, M. & Stockburger, E., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 1345-1352 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  70. Published

    Concept of a control system based on 3D geometry measurement for open die forging of large-scale components

    Quentin, L., Beermann, R., Brunotte, K., Behrens, B., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 8 p. 113520B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  71. Published

    Porosity in hot formed cast steel

    Behrens, B. A., Ursinus, J., Büdenbender, C., Brunotte, K., Nürnberger, F., Demler, E. & Maier, H. J., 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 283-288 6 p. (International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  72. 2019

  73. Published

    Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming: Untersuchung der Grenzformänderung martensitischer Chromstähle für die Warmblechumformung

    Stockburger, E., Wester, H., Uhe, J., Brunotte, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. p. 159-168 10 p. Chapter 16

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  74. Published

    Shearing of Aluminium Rods for the Production of Billets for Bulk Metal Forming Operations

    Behrens, B., Brunotte, K. & Lippold, L., 18 Sept 2019, Advances in Materials, Mechanics and Manufacturing: Proceedings of the 2nd International Conference on Advanced Materials, Mechanics and Manufacturing, A3M 2018. Chaari, F., Barkallah, M., Zouari, B., Haddar, M., Khabou, M. T., Bouguecha, A. & Kchaou, M. (eds.). 1. ed. Springer Nature, p. 133-141 9 p. (Lecture Notes in Mechanical Engineering (LNME)).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  75. 2018

  76. Published

    Adapted diffusion processes for effective forging dies

    Paschke, H., Nienhaus, A., Brunotte, K., Petersen, T., Siegmund, M., Lippold, L., Weber, M., Mejauschek, M., Landgraf, P., Braeuer, G., Behrens, B. A. & Lampke, T., 3 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). 040016. (AIP Conference Proceedings; vol. 1960).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  77. Published

    Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical Components

    Behrens, B. A., Brunotte, K. & Bohr, D., 24 Apr 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). p. 163-170 8 p. (Key Engineering Materials; vol. 767 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  78. Published

    Ecological lubrication in cold forming of sintered powder metallurgical components

    Behrens, B., Brunotte, K. & Bohr, D., 15 Mar 2018, In: Dry Metal Forming Open Access Journal (DMFOAJ). 4 - 2018, p. 68-73 6 p.

    Research output: Contribution to journal › Article › Research

  79. Published

    Adaptations in diffusion treatments enable the tool life time enhancement of forging dies

    Paschke, H., Mejauschek, M., Weber, M., Brunotte, K., Siegmund, M., Lippold, L., Lenz, D., Behrens, B. & Dueltgen, P., 2018.

    Research output: Contribution to conference › Abstract › Research

  80. Published

    Optimised impregnation parameters of self-lubricating powder metallurgical components for cold bulk forming

    Behrens, B. A., Brunotte, K. & Bohr, D., 2018, METAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings. p. 242-248 7 p. (METAL 2018 - 27th International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  81. 2016

  82. Published

    Influence of heat pipe cooling on the wear of hot forging dies

    Behrens, B. A., Puppa, J., Huskic, A., Brunotte, K., Bouguecha, A. & Prüß, T., 23 Sept 2016, In: Production Engineering. 10, 6, p. 599-606 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  83. Published

    Reprocessing of aluminum chips by hot backward extrusion

    Behrens, B. A., Bouguecha, A., Brunotte, K., Dannenberg, M., Huskic, A. & Bonhage, M., 18 Jun 2016, In: Production Engineering. 10, 4-5, p. 375-382 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. 2015

  85. Published

    Adapted surface properties of hot forging tools using plasma technology for an effective wear reduction

    Paschke, H., Yilkiran, T., Lippold, L., Brunotte, K., Weber, M., Braeuer, G. & Behrens, B. A., 6 Jun 2015, In: WEAR. 330-331, p. 429-438 10 p.

    Research output: Contribution to journal › Article › Research › peer review