Profile picture not found

Dr.  Kai Brunotte

https://orcid.org/0000-0002-2777-3498
View graph of relations
1 - 20 out of 73Page size: 20

Publications

  1. 2024
  2. E-pub ahead of print

    Intermetallic Compound Layer Morphology and Distribution in Friction-Welded Steel–Aluminum Components

    Kahra, C., Piwek, A., Peddinghaus, J., Brunotte, K., Maier, H. J., Nürnberger, F. & Herbst, S., 10 Oct 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

    Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  4. Published

    Effect of different oxide layer shares on the upsetting of titanium aluminide specimens

    Döring, S., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 958-967 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium

    Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Prevention of scaling by means of recycled process waste gases

    Gerke, N., Peddinghaus, J., Rosenbusch, D., Uhe, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 861-870 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  9. Published

    Using computer vision to analyse fracture strains of oxide scale layers on a macro level

    Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. 2023
  11. Published

    Prozessoptimierung mittels Inline-Geometriemessung

    Kern, P., Hinz, L., Kästner, M., Reithmeier, E., Blankemeyer, S., Ince, C., Raatz, A., Behrens, B., Brunotte, K. & Uhe, J., 7 Dec 2023, In: wt Werkstattstechnik online. 113, 10, p. 413-418 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  13. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. Published

    Metal-Containing Diamond-Like Carbon Coatings with Increased Temperature Stability for Wear Protection of Nitrided Hot Forging Dies

    Behrens, B. A., Bräuer, G., Brunotte, K., Peddinghaus, J., Rothgänger, M., Uhe, J., Kipp, C. & Siegmund, M., 27 Sept 2023, In: Materials Science Forum. 1097, p. 51-60

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Tool Surface Degradation and Adhesion in Aluminium Forging

    Peddinghaus, J., Paschke, H., Brunotte, K. & Behrens, B. A., 27 Sept 2023, In: Materials Science Forum. 1097, p. 41-49

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere

    Behrens, B., Brunotte, K., Peddinghaus, J., Ursinus, J., Döring, S., Maus-Friedrichs, W., Gustus, R. & Szafarska, M., 19 Sept 2023, In: Journal of Manufacturing and Materials Processing. 7, 5, 171.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Monitoring of freezing patterns within 3D collagen-hydroxyapatite scaffolds using infrared thermography

    Mutsenko, V., Anastassopoulos, E., Zaragotas, D., Simaioforidou, A., Tarusin, D., Lauterboeck, L., Sydykov, B., Brunotte, R., Brunotte, K., Rozanski, C., Petrenko, A. Y., Braslavsky, I., Glasmacher, B. & Gryshkov, O., Jun 2023, In: CRYOBIOLOGY. 111, p. 57-69 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Hot die forging with nitrided and thermally stabilized DLC coated tools

    Siegmund, M., Kipp, C., Peddinghaus, J., Brunotte, K., Bräuer, G. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 583-590 8 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling

    Piwek, A., Peddinghaus, J., Uhe, J., Brunotte, K. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 591-600 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Microstructure analysis of hybrid aluminum parts from recycled EN AW-6082 and EN AW-7075 chips

    Ursinus, J., Koch, A., Brunotte, K., Walther, F. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 1977-1986 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  21. Published

    Investigation on Adhesion-Promoting Process Parameters in Steel Bulk Metal Forming

    Lorenz, U., Brunotte, K., Peddinghaus, J. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 91-99 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  22. Published

    Study on the Compressibility of TiAl48-2-2 Powder Mixed with Elemental Powders

    Heymann, A., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 13-23 11 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Previous 1 2 3 4 Next