Publications
- Published
A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging Processes
Behrens, B. A., Volk, W., Maier, D., Scandola, L., Ott, M., Brunotte, K., Büdenbender, C. & Till, M., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 295-300 6 p.Research output: Contribution to journal › Conference article › Research › peer review
- Published
Adaptations in diffusion treatments enable the tool life time enhancement of forging dies
Paschke, H., Mejauschek, M., Weber, M., Brunotte, K., Siegmund, M., Lippold, L., Lenz, D., Behrens, B. & Dueltgen, P., 2018.Research output: Contribution to conference › Abstract › Research
- Published
Adapted diffusion processes for effective forging dies
Paschke, H., Nienhaus, A., Brunotte, K., Petersen, T., Siegmund, M., Lippold, L., Weber, M., Mejauschek, M., Landgraf, P., Braeuer, G., Behrens, B. A. & Lampke, T., 3 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). 040016. (AIP Conference Proceedings; vol. 1960).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Adapted surface properties of hot forging tools using plasma technology for an effective wear reduction
Paschke, H., Yilkiran, T., Lippold, L., Brunotte, K., Weber, M., Braeuer, G. & Behrens, B. A., 6 Jun 2015, In: WEAR. 330-331, p. 429-438 10 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Adjusting Mechanical Properties of Forging Dies Produced by Ausforming
Behrens, B. A., Brunotte, K., Petersen, T., Ostermeyer, C. & Till, M., 2 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 2697Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming
Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Analysis of alloy influence on the joint formation in compound forging of geared steel-aluminium components
Behrens, B. A., Brunotte, K. & Kuwert, P., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 190-195 6 p.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- E-pub ahead of print
Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components
Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.Research output: Contribution to journal › Article › Research › peer review
- Published
Beitrag zur Steigerung der Standmenge von Werkzeugen der Warmmassivumformung durch den Einsatz lokaler belastungsangepasster Verschleißschutzbehandlungen
Brunotte, K., 2021, Garbsen.Research output: Thesis › Doctoral thesis
- Published
Carbon Footprint Tool zur Messung und Erfassung von Halbzeug-und Werkzeugtemperaturen: Big Data in der Massivumformung
Ortlieb, E., Müller, F., Peddinghaus, S., Peddinghaus, J., Wester, H., Rothgänger, M., Monke, H., Raible, J., Huber, M. & Brunotte, K., 2023, In: WT Werkstattstechnik. 113, 10, p. 419-424 6 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die
Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems
Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.Research output: Contribution to journal › Article › Research › peer review
- Published
Clinching of Heated Aluminum Die Casting
Yarcu, S., Huebner, S., Yilkiran, D., Brunotte, K., Behrens, B. A., Schuchardt, T., Mueller, S. & Dilger, K., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 85-93 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
Concept of a control system based on 3D geometry measurement for open die forging of large-scale components
Quentin, L., Beermann, R., Brunotte, K., Behrens, B., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 8 p. 113520B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting
Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.Research output: Contribution to conference › Paper › Research › peer review
- Published
Ecological lubrication in cold forming of sintered powder metallurgical components
Behrens, B., Brunotte, K. & Bohr, D., 15 Mar 2018, In: Dry Metal Forming Open Access Journal (DMFOAJ). 4 - 2018, p. 68-73 6 p.Research output: Contribution to journal › Article › Research
- Published
Effect of different oxide layer shares on the upsetting of titanium aluminide specimens
Döring, S., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 958-967 10 p. (Materials Research Proceedings; vol. 41).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Experimental Investigation of Endogenous Lubrication during Cold Upsetting of Sintered Powder Metallurgical Components
Behrens, B. A., Brunotte, K. & Bohr, D., 24 Apr 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). p. 163-170 8 p. (Key Engineering Materials; vol. 767 KEM).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the component
Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 4 Sept 2020, In: Procedia Manufacturing. 50, p. 706-712 7 p.Research output: Contribution to journal › Conference article › Research › peer review
- Published
Experimental Process Design for Reclamation of Geared Components
Kuwert, P., Petersen, T., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 125-133 9 p. (Lecture Notes in Production Engineering; vol. Part F1136).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review