Publications
- Published
Tailored Forming: Drucküberlagertes Warmfließpressen: Prozesskette zur Herstellung hybrider Hochleistungsbauteile
Piwek, A., Uhe, J., Peddinghaus, J. & Brunotte, K., 2022, In: WT Werkstattstechnik. 112, 10, p. 671-676 6 p.Research output: Contribution to journal › Article › Research › peer review
- Published
Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling
Piwek, A., Peddinghaus, J., Uhe, J., Brunotte, K. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 591-600 10 p. (Materials Research Proceedings; vol. 28).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium
Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- E-pub ahead of print
Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components
Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.Research output: Contribution to journal › Article › Research › peer review
- Published
Concept of a control system based on 3D geometry measurement for open die forging of large-scale components
Quentin, L., Beermann, R., Brunotte, K., Behrens, B., Kästner, M. & Reithmeier, E., 1 Apr 2020, Optics and Photonics for Advanced Dimensional Metrology. de Groot, P. J., Leach, R. K. & Picart, P. (eds.). 8 p. 113520B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11352).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research
- Published
Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component
Rosenbusch, D., Müller, P., Hübner, S., Brunotte, K. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 23-33 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
Hot die forging with nitrided and thermally stabilized DLC coated tools
Siegmund, M., Kipp, C., Peddinghaus, J., Brunotte, K., Bräuer, G. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 583-590 8 p. (Materials Research Proceedings; vol. 28).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die
Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
- Published
Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718
Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming: Untersuchung der Grenzformänderung martensitischer Chromstähle für die Warmblechumformung
Stockburger, E., Wester, H., Uhe, J., Brunotte, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. p. 159-168 10 p. Chapter 16Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology
Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Microstructure analysis of hybrid aluminum parts from recycled EN AW-6082 and EN AW-7075 chips
Ursinus, J., Koch, A., Brunotte, K., Walther, F. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 1977-1986 10 p. (Materials Research Proceedings; vol. 28).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting
Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.Research output: Contribution to conference › Paper › Research › peer review
- Published
Using computer vision to analyse fracture strains of oxide scale layers on a macro level
Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
- Published
Clinching of Heated Aluminum Die Casting
Yarcu, S., Huebner, S., Yilkiran, D., Brunotte, K., Behrens, B. A., Schuchardt, T., Mueller, S. & Dilger, K., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 85-93 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review