Loading [MathJax]/extensions/tex2jax.js
Profile picture not found

Dr.  Johanna Uhe

https://orcid.org/0000-0002-4320-5570
1 - 56 out of 56Page size: 80
Order:

Publications

  1. 2025

  2. E-pub ahead of print

    Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components

    Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  3. 2024

  4. Published

    Characterisation of oxide scale layers on iron based steels on the nanoscale for hot forging

    Behrens, B., Uhe, J., Lampke, T., Bergelt, T., Graf, M., Wester, H., Peddinghaus, S. & Mohnfeld, N., 2 Dec 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 275-280 (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Development of a test setup for the experimental determination of the heat transfer coefficient for compound forging

    Behrens, B., Uhe, J., Wester, H. & Mohnfeld, N., 2 Dec 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 75-80 (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. E-pub ahead of print

    Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles

    Mohnfeld, N., Dewidar, A., Qarbi, K., Wester, H., Schäfke, F. P., Verschinin, A., Maier, H. J., Barton, S., Klose, C. & Uhe, J., 13 Nov 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    A novel method for manufacturing of hybrid structures made of metal and fiber reinforced plastics using a multidirectional forming process

    Holt, J., Behrens, B., Uhe, J. & Wester, H., 26 Jun 2024, METAL Conference Proeedings. p. 456-460 (Metal).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Charakterisierung der Zunderschädigung: Zunderschichten von Kohlenstoffstählen mit variierenden Chromanteilen

    Behrens, B. A., Lampke, T., Uhe, J., Graf, M., Bergelt, T., Wester, H., Mohnfeld, N. & Peddinghaus, S., 2024, In: WT Werkstattstechnik. 114, 10, p. 608-615 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium

    Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. Published

    Numerical investigation of rotational friction welding for C22.8 - 41Cr4 joints using a substitute model

    Mohnfeld, N., Wester, H., Tunc Karaer, G., Piwek, A. & Uhe, J., 2024, Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 1668-1677 10 p. (Material Forming: ESAFORM 2024).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Numerical Modelling of Transformation-Induced Plasticity in Hot Forging Simulations

    Mohnfeld, N., Uhe, J., Wester, H., Kock, C. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 609-618 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  12. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Prevention of scaling by means of recycled process waste gases

    Gerke, N., Peddinghaus, J., Rosenbusch, D., Uhe, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 861-870 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. 2023

  15. Published

    Prozessoptimierung mittels Inline-Geometriemessung

    Kern, P., Hinz, L., Kästner, M., Reithmeier, E., Blankemeyer, S., Ince, C., Raatz, A., Behrens, B., Brunotte, K. & Uhe, J., 7 Dec 2023, In: wt Werkstattstechnik online. 113, 10, p. 413-418 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  17. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  18. Published

    Metal-Containing Diamond-Like Carbon Coatings with Increased Temperature Stability for Wear Protection of Nitrided Hot Forging Dies

    Behrens, B. A., Bräuer, G., Brunotte, K., Peddinghaus, J., Rothgänger, M., Uhe, J., Kipp, C. & Siegmund, M., 27 Sept 2023, In: Materials Science Forum. 1097, p. 51-60

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Experimental and numerical investigation of dynamic transformation induced plasticity during hot forming

    Behrens, B., Uhe, J., Wester, H., Kock, C. & Heimes, N., 13 Jun 2023, METAL Conference Proeedings. p. 164-169

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Investigation of the joining zone formation of impact extruded hybrid components by varied forming sequence and partial cooling

    Piwek, A., Peddinghaus, J., Uhe, J., Brunotte, K. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 591-600 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  21. Published

    Modelling failure of joining zones during forming of hybrid parts

    Wester, H., Stockburger, E., Peddinghaus, S., Uhe, J. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 717-726 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. Published

    Characterisation and Modelling of Intermetallic Phase Growth of Aluminium and Titanium in a Tailored Forming Process Chain

    Heimes, N., Wester, H., Golovko, O., Klose, C., Maier, H. J. & Uhe, J., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 32-41 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  23. Published

    Development of a Temperature-Graded Tailored Forming Process for Hybrid Axial Bearing Washers

    Peddinghaus, J., Faqiri, Y., Hassel, T., Uhe, J. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 3-12 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  24. Published

    Data quality assurance in the research process using the example of tensile tests

    Mohnfeld, N., Muller, L., Wawer, M. L., Uhe, J., Koepler, O., Auer, S., Lachmeyer, R. & Mozgova, I., 2023, DS 125: Proceedings of the 34th Symposium Design for X (DFX2023). p. 143-152

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  25. Published

    KNN-Entwicklung in der Halbwarmumformung

    Ramirez, D. V., Wester, H., Uhe, J. & Behrens, B. A., 2023, In: WT Werkstattstechnik. 113, 10, p. 407-412 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  26. 2022

  27. Published

    Investigations on Additively Manufactured Stainless Bearings

    Coors, T., Faqiri, M. Y., Saure, F., Kahra, C., Büdenbender, C., Peddinghaus, J., Prasanthan, V., Pape, F., Hassel, T., Herbst, S., Nürnberger, F., Wester, H., Uhe, J., Breidenstein, B., Denkena, B., Behrens, B. A., Poll, G. & Maier, H. J., 8 Nov 2022, In: COATINGS. 12, 11, 1699.

    Research output: Contribution to journal › Article › Research › peer review

  28. Published

    Comparsion of the joining zone development of hybrid semi-finished products after different extrusion processes

    Piwek, A., Uhe, J., Peddinghaus, J., Ross, I. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 205-210 6 p. (METAL Conference Proeedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  29. Published

    Tailored Forming of hybrid bulk metal components

    Behrens, B. A., Uhe, J., Ross, I., Peddinghaus, J., Ursinus, J., Matthias, T. & Bährisch, S., May 2022, In: International Journal of Material Forming. 15, 3, 15 p., 42.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Fabrication of steel-aluminium parts by impact extrusion

    Behrens, B. A., Uhe, J., Süer, F., Duran, D., Matthias, T. & Ross, I., 2022, In: Materials Today: Proceedings. 59, p. 220-226 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  31. Published

    In-Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection

    Middendorf, P., Rothgänger, M., Peddinghaus, J., Brunotte, K., Uhe, J., Behrens, B. A., Quentin, L., Kästner, M. & Reithmeier, E., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 1211-1220 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  32. Published

    Numerical Study on the Influence of the Initial Temperature Distribution on the Material Flow During Die Forging of a Semi-finished Aluminium-Titanium Product

    Büdenbender, C., Wester, H., Uhe, J. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  33. Published

    Tailored Forming: Drucküberlagertes Warmfließpressen: Prozesskette zur Herstellung hybrider Hochleistungsbauteile

    Piwek, A., Uhe, J., Peddinghaus, J. & Brunotte, K., 2022, In: WT Werkstattstechnik. 112, 10, p. 671-676 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  34. 2021

  35. Published

    Joining zone evaluation of hybrid semi-finished products after backward Can extrusion

    Behrens, B. A., Uhe, J., Petersen, T., Demter, P., Büdenbender, C. & Ross, I., 15 Sept 2021, METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings. p. 317-322 6 p. (METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  36. Published

    Numerical evaluation of forging process designs of a hybrid co-extruded demonstrator consisting of steel and aluminium.

    Behrens, B. A., Wester, H., Petersen, T., Uhe, J., Büdenbender, C., Peddinghaus, J. & Chugreeva, A., 14 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 954

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  37. Published

    Numerical investigations on the influence of the weld surface and die geometry on the resulting tensile stresses in the joining zone during an extrusion process

    Behrens, B. A., Duran, D., Uhe, J. & Matthias, T., 14 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 919

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  38. Published

    A design concept of active cooling for tailored forming workpieces during induction heating

    Ince, C. V., Chugreeva, A., Böhm, C., Aldakheel, F., Uhe, J., Wriggers, P., Behrens, B. A. & Raatz, A., Apr 2021, In: Production Engineering. 15, 2, p. 177-186 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Influence of degree of deformation on welding pore reduction in high-carbon steels

    Behrens, B. A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Budde, L., Saure, F., Mildebrath, M., Coors, T., Faqiri, M. Y. & Büdenbender, C., Apr 2021, In: Production Engineering. 15, 2, p. 161-168 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Introduction to tailored forming

    Behrens, B. A. & Uhe, J., Apr 2021, In: Production Engineering. 15, 2, p. 133-136 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  41. Published

    Process chain for the manufacture of hybrid bearing bushings

    Thürer, S. E., Chugreeva, A., Heimes, N., Uhe, J., Behrens, B. A., Maier, H. J. & Klose, C., Apr 2021, In: Production Engineering. 15, 2, p. 137-150 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  42. Published

    Challenges in the Forging of Steel-Aluminum Bearing Bushings

    Behrens, B., Uhe, J., Petersen, T., Klose, C., Thürer, S., Diefenbach, J. & Chugreeva, A., 8 Feb 2021, In: MATERIALS. 14, 4, p. 1-14 14 p., 803.

    Research output: Contribution to journal › Article › Research › peer review

  43. Published

    Contact geometry modification of friction-welded semi-finished products to improve the bonding of hybrid components

    Behrens, B. A., Uhe, J., Petersen, T., Nürnberger, F., Kahra, C., Ross, I. & Laeger, R., 8 Jan 2021, In: Metals. 11, 1, p. 1-15 115.

    Research output: Contribution to journal › Article › Research › peer review

  44. Published

    Fließpressen mit Drucküberlagerung

    Behrens, B., Ursinus, J., Duran, D., Uhe, J. & Matthias, T., 2021, In: WT Werkstattstechnik. 111, 10, p. 671-676 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. Published

    Numerische und experimentelle Untersuchungen zum Verbundstrangpressen unter Berücksichtigung der intermetallischen Phasenbildung

    Uhe, J., 2021, Garbsen. 130 p.

    Research output: Thesis › Doctoral thesis

  46. 2020

  47. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Characterization and modeling of intermetallic phase formation during the joining of aluminum and steel in analogy to co-extrusion

    Behrens, B. A., Maier, H. J., Klose, C., Wester, H., Thürer, S. E., Heimes, N. & Uhe, J., 26 Nov 2020, In: Metals. 10, 12, p. 1-16 16 p., 1582.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale

    Heimes, N., Uhe, J., Thürer, S. E., Wester, H., Maier, H., Klose, C. & Behrens, B., 25 Sept 2020, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP). Berlin: Springer Berlin, p. 66-75 10 p. (Lecture Notes in Production Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  50. Published

    Lateral angular co-extrusion: Geometrical and mechanical properties of compound profiles

    Thürer, S. E., Peddinghaus, J., Heimes, N., Bayram, F. C., Bal, B., Uhe, J., Behrens, B., Maier, H. & Klose, C., Sept 2020, In: Metals. 10, 9, p. 1-15 15 p., 1162.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Hot forming limit curves for numerical press hardening simulation of AISI 420C

    Behrens, B. A., Uhe, J., Wester, H. & Stockburger, E., 25 Aug 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 350-355 6 p. (Proceedings of the conference were published in Web of Science and Scopus).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  52. Published

    FE-based Layer Design of Deposition-Welded Semi-finished Parts for the Production of Hybrid Bevel Gear

    Behrens, B. A., Uhe, J., Wester, H., Matthias, T. & Büdenbender, C., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 309-314 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  53. Published

    Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid Profiles

    Behrens, B., Uhe, J., Thürer, S. E., Klose, C. & Heimes, N., 2020, In: Procedia Manufacturing. 47, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  54. 2019

  55. Published

    Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming: Untersuchung der Grenzformänderung martensitischer Chromstähle für die Warmblechumformung

    Stockburger, E., Wester, H., Uhe, J., Brunotte, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. p. 159-168 10 p. Chapter 16

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  56. Published

    Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusion

    Behrens, B., Klose, C., Thürer, S. E., Heimes, N. & Uhe, J., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics Inc., 7 p. 040029. (AIP Conference Proceedings; vol. 2113, no. 1).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  57. 2018

  58. Published

    A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams

    Behrens, B. A., Klose, C., Chugreev, A., Heimes, N., Thürer, S. E. & Uhe, J., Sept 2018, In: Metals. 8, 9, 717.

    Research output: Contribution to journal › Article › Research › peer review

  59. Published

    Numerical Investigations on the Lateral Angular Co-Extrusion of Aluminium and Steel

    Behrens, B. A., Klose, C., Chugreev, A., Thürer, S. E. & Uhe, J., 3 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 030001. (AIP Conference Proceedings; vol. 1960).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  60. 2017

  61. Published

    Co-Extrusion of Semi-Finished Aluminium-Steel Compounds

    Thürer, S. E., Uhe, J., Golovko, O., Bonk, C., Bouguecha, A., Klose, C., Behrens, B. A. & Maier, H. J., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. Brabazon, D., Ul Ahad, I. & Naher, S. (eds.). American Institute of Physics Inc., 140002. (AIP Conference Proceedings; vol. 1896).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  62. Published

    Mechanical Properties of Co-Extruded Aluminium-Steel Compounds

    Thürer, S. E., Uhe, J., Golovko, O., Bonk, C., Bouguecha, A., Behrens, B. A. & Klose, C., 3 Jul 2017, 21st Symposium on Composites, 2017. Herrmann, A. S. (ed.). p. 512-519 8 p. (Key Engineering Materials; vol. 742 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  63. Published

    Local heat treatment in draw bending for profiles of manganese boron steel 22MnB5

    Behrens, B., Bonk, C., Hübner, S., Uhe, J., Klie, R. & Moritz, J., 28 Apr 2017, In: Procedia Engineering. 183, p. 31-36 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  64. Published

    Aktuelle Forschungsschwerpunkte in der Massivumformung

    Behrens, B., Bouguecha, A., Moritz, J., Stonis, M., Klose, C., Blohm, T., Chugreeva, A., Duran, D., Golovko, O., Thürer, S. E. & Uhe, J., 2017, Innovationspotenziale in der Umformtechnik: 22. Umformtechnisches Kolloquium Hannover, 15. und 16. März 2017. Behrens, B.-A. (ed.). Vol. UKH 2017. p. 15-32 (Berichte aus dem IFUM; vol. UKH 2017).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  65. 2016

  66. Published

    Umformtechnische Herstellung hybrider Lagerbuchsen

    Behrens, B. A., Bouguecha, A., Vucetic, M., Huskic, A., Uhe, J., Frischkorn, C., Matthias, T., Stakhieva, A., Duran, D., Thürer, S. E., Golovko, O. & Klose, C., 2016, In: WT Werkstattstechnik. 106, 10, p. 743-748 6 p.

    Research output: Contribution to journal › Article › Research › peer review