Loading [MathJax]/extensions/tex2jax.js
Profile picture not found

Hendrik Wester

1 - 90 out of 90Page size: 160
Order:

Publications

  1. 2025

  2. Published

    Evaluating the Degradation of WE43 for Implant Applications: Optical and Mechanical Insights

    Siring, J., Cökelek, A., Mohnfeld, N., Wester, H. & Behrens, B., 18 Mar 2025, In: Applied Sciences. 15, 6, 3300.

    Research output: Contribution to journal › Article › Research › peer review

  3. E-pub ahead of print

    Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components

    Piwek, A., Ortlieb, E., Ince, C. V., Peddinghaus, J., Wester, H., Uhe, J., Raatz, A. & Brunotte, K., 15 Jan 2025, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  4. 2024

  5. Published

    Characterisation of oxide scale layers on iron based steels on the nanoscale for hot forging

    Behrens, B., Uhe, J., Lampke, T., Bergelt, T., Graf, M., Wester, H., Peddinghaus, S. & Mohnfeld, N., 2 Dec 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 275-280 (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Development of a test setup for the experimental determination of the heat transfer coefficient for compound forging

    Behrens, B., Uhe, J., Wester, H. & Mohnfeld, N., 2 Dec 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 75-80 (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Influence of deformation on the interface properties of coated fuselage shells

    Jepkens, J., Mohnfeld, N., Müller, P., Wester, H., Hübner, S., Wehrmann, S. & Behrens, B., 2 Dec 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 234-239 6 p. (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Deep drawing of coated aluminium sheets: Experimental and numerical study

    Abdennadher, M., Sellami, A., Stockburger, E., Mohnfeld, N., Wester, H., Behrens, B., Bouguecha, A. & Elleuch, R., 20 Nov 2024, In: Materialwissenschaft und Werkstofftechnik. 55, 11, p. 1601-1609 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. E-pub ahead of print

    Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles

    Mohnfeld, N., Dewidar, A., Qarbi, K., Wester, H., Schäfke, F. P., Verschinin, A., Maier, H. J., Barton, S., Klose, C. & Uhe, J., 13 Nov 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    A novel method for manufacturing of hybrid structures made of metal and fiber reinforced plastics using a multidirectional forming process

    Holt, J., Behrens, B., Uhe, J. & Wester, H., 26 Jun 2024, METAL Conference Proeedings. p. 456-460 (Metal).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Rheological characterisation and modelling of a glass mat reinforced thermoplastic for the simulation of compression moulding

    Althaus, P., Wester, H., Rosenbusch, D. & Behrens, B., 25 May 2024, Material Forming. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 411-421 11 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  12. Published

    Numerical Investigation of Punch Radius and Shape Effects on the Formability of Coated Aluminum Sheet in Deep Drawing

    Abdennadher, M., Bouguecha, A., Stockburger, E., Wester, H., Behrens, B. A. & Elleuch, R., 24 Mar 2024, Advances in Materials, Mechanics and Manufacturing III : Proceedings of The Fourth International Conference on Advanced Materials, Mechanics and Manufacturing (A3M’2023). Ben Amar, M., Trabelsi, H., Ghorbel, E., Tounsi, D., El Mahi, A., Haddar, M., Ben Souf, M. A., Beyaoui, M. & Chaari, F. (eds.). Springer Science and Business Media Deutschland GmbH, p. 373-379 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

    Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. Published

    Analysis of Semi-Hot Forming Behaviour of AA7075 Sheet Metal

    Vasquez Ramirez, D., Wester, H., Rosenbusch, D. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 345-355 11 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  15. Published

    Charakterisierung der Zunderschädigung: Zunderschichten von Kohlenstoffstählen mit variierenden Chromanteilen

    Behrens, B. A., Lampke, T., Uhe, J., Graf, M., Bergelt, T., Wester, H., Mohnfeld, N. & Peddinghaus, S., 2024, In: WT Werkstattstechnik. 114, 10, p. 608-615 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Isothermes und sauerstofffreies Umformen von Titan/Study on the isothermal and oxygen-free forming of encapsulated semi-finished titanium parts

    Möckelmann, J., Siring, J., Peddinghaus, J., Wester, H., Brunotte, K. & Behrens, B., 2024, In: wt Werkstattstechnik online. 114, 10, p. 578-587 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Numerical investigation of rotational friction welding for C22.8 - 41Cr4 joints using a substitute model

    Mohnfeld, N., Wester, H., Tunc Karaer, G., Piwek, A. & Uhe, J., 2024, Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 1668-1677 10 p. (Material Forming: ESAFORM 2024).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  18. Published

    Numerical Modelling of Transformation-Induced Plasticity in Hot Forging Simulations

    Mohnfeld, N., Uhe, J., Wester, H., Kock, C. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 609-618 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  19. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  21. Published

    Using computer vision to analyse fracture strains of oxide scale layers on a macro level

    Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. 2023

  23. Published

    Simulation and Validation of an Incremental Bending Process for Cylindrical Fuselage Components

    Jepkens, J., Müller, P., Wester, H., Hübner, S., Wehrmann, S. & Behrens, B., 24 Dec 2023, In: Aerospace. 11, 1, 14.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  25. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  26. Published

    Fracture Characterisation and Modelling of AHSS Using Acoustic Emission Analysis for Deep Drawing

    Stockburger, E., Wester, H. & Behrens, B. A., 5 Jul 2023, In: Journal of Manufacturing and Materials Processing. 7, 4, 127.

    Research output: Contribution to journal › Article › Research › peer review

  27. Published

    Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading

    Behrens, B., Stockburger, E., Wester, H., Poll, G., Pape, F., Konopka, D. & Heimes, N., 30 Jun 2023, In: Lubricants. 11, 7, 14 p., 283.

    Research output: Contribution to journal › Article › Research › peer review

  28. Published

    Experimental and numerical investigation of dynamic transformation induced plasticity during hot forming

    Behrens, B., Uhe, J., Wester, H., Kock, C. & Heimes, N., 13 Jun 2023, METAL Conference Proeedings. p. 164-169

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  29. Published

    Influence of Deformation on the Coating Properties of aircraft fuselage shells

    Jepkens, J., Heimes, N., Wester, H., Müller, P., Hübner, S., Wehrmann, S., Müller, M. & Behrens, B., 13 Jun 2023, METAL Conference Proeedings. p. 380-385

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  30. Published

    Extension of the modified Mohr-Coulomb fracture model by a strain rate and temperature dependence

    Vasquez Ramirez, D., Wester, H., Rosenbusch, D. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 1407-1416 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  31. Published

    Improved failure characterisation of high-strength steel using a butterfly test rig with rotation control

    Stockburger, E., Wester, H., Jegatheeswaran, V., Dykiert, M. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 737-746 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  32. Published

    Modelling failure of joining zones during forming of hybrid parts

    Wester, H., Stockburger, E., Peddinghaus, S., Uhe, J. & Behrens, B. A., 19 Apr 2023, Material Forming: The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). p. 717-726 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  33. Published

    Failure Modelling of CP800 Using Acoustic Emission Analysis

    Stockburger, E., Wester, H. & Behrens, B. A., 22 Mar 2023, In: Applied Sciences (Switzerland). 13, 6, 4067.

    Research output: Contribution to journal › Article › Research › peer review

  34. Published

    Characterisation and Modelling of Intermetallic Phase Growth of Aluminium and Titanium in a Tailored Forming Process Chain

    Heimes, N., Wester, H., Golovko, O., Klose, C., Maier, H. J. & Uhe, J., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 32-41 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  35. Published

    Experimental Investigation of Friction-Drilled Bushings for Metal-Plastic In-Mold Assembly

    Droß, M., Ossowski, T., Dröder, K., Stockburger, E., Wester, H. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 199-208 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  36. Published

    Finite Element Analysis of a Combined Collar Drawing and Thread Forming Process

    Stockburger, E., Wester, H., Rosenbusch, D. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 100-110 11 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  37. Published

    Numerical and Experimental Failure Analysis of Deep Drawing with Additional Force Transmission

    Althaus, P., Weichenhain, J., Hübner, S., Wester, H., Rosenbusch, D. & Behrens, B. A., 2 Feb 2023, Lecture Notes in Production Engineering. Springer Nature, p. 142-151 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  38. Published

    Process analyses of friction drilling using the Smoothed Particle Galerkin method

    Stockburger, E., Zhang, W., Wester, H., Rosenbusch, D. & Behrens, B. A., Jan 2023, In: International Journal of Material Forming. 16, 1, 14.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Carbon Footprint Tool zur Messung und Erfassung von Halbzeug-und Werkzeugtemperaturen: Big Data in der Massivumformung

    Ortlieb, E., Müller, F., Peddinghaus, S., Peddinghaus, J., Wester, H., Rothgänger, M., Monke, H., Raible, J., Huber, M. & Brunotte, K., 2023, In: WT Werkstattstechnik. 113, 10, p. 419-424 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Development of polygon forming processes for aerospace engineering

    Müller, P., Behrens, B. A., Hübner, S., Jepkens, J., Wester, H. & Lautenbach, S., 2023, Sheet Metal 2023 - 20th International Conference on Sheet Metal. Merklein, M., Hagenah, H., Duflou, J. R., Fratini, L., Micari, F., Martins, P. & Meschut, G. (eds.). p. 69-76 8 p. (Materials Research Proceedings; vol. 25).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  41. Published

    Evaluating material failure of AHSS using acoustic emission analysis

    Stockburger, E., Vogt, H., Wester, H., Hübner, S. & Behrens, B. A., 2023, Sheet Metal 2023 - 20th International Conference on Sheet Metal. Merklein, M., Hagenah, H., Duflou, J. R., Fratini, L., Micari, F., Martins, P. & Meschut, G. (eds.). p. 379-386 8 p. (Materials Research Proceedings; vol. 25).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  42. Published

    KNN-Entwicklung in der Halbwarmumformung

    Ramirez, D. V., Wester, H., Uhe, J. & Behrens, B. A., 2023, In: WT Werkstattstechnik. 113, 10, p. 407-412 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  43. Published

    Numerical analyses of the influence of a counter punch during deep drawing

    Behrens, B. A., Rosenbusch, D., Wester, H., Weichenhain, J. & Althaus, P., 2023, Sheet Metal 2023 - 20th International Conference on Sheet Metal. Merklein, M., Hagenah, H., Duflou, J. R., Fratini, L., Micari, F., Martins, P. & Meschut, G. (eds.). p. 329-336 8 p. (Materials Research Proceedings; vol. 25).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  44. Published

    Simulation of Hot-Forging Processes with a Temperature−Dependent Viscoplasticity Model

    Siring, J., Schlayer, M., Wester, H., Seifert, T., Rosenbusch, D. & Behrens, B., 2023, Lecture Notes in Production Engineering. p. 81-90 10 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  45. Published

    Sphärisches Polygon-Formen

    Müller, P., Hübner, S., Wester, H., Jepkens, J., Wehrmann, S. & Behrens, B., 2023, In: wt Werkstattstechnik online. 113, 10, p. 444-449 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  46. 2022

  47. Published

    Investigations on Additively Manufactured Stainless Bearings

    Coors, T., Faqiri, M. Y., Saure, F., Kahra, C., Büdenbender, C., Peddinghaus, J., Prasanthan, V., Pape, F., Hassel, T., Herbst, S., Nürnberger, F., Wester, H., Uhe, J., Breidenstein, B., Denkena, B., Behrens, B. A., Poll, G. & Maier, H. J., 8 Nov 2022, In: COATINGS. 12, 11, 1699.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Hardness Assessment Considering Nitrided Layers Based on Tempering Tests for Numerical Wear Prediction for Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H., Lorenz, U. & Müller, F., 13 Oct 2022, In: MATERIALS. 15, 20, 7105.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Process-Integrated Lubrication in Sheet Metal Forming

    Lachmayer, R., Behrens, B. A., Ehlers, T., Müller, P., Althaus, P., Oel, M., Farahmand, E., Gembarski, P. C., Wester, H. & Hübner, S., Oct 2022, In: Journal of Manufacturing and Materials Processing. 6, 5, 24 p., 121.

    Research output: Contribution to journal › Article › Research › peer review

  50. Published

    Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes

    Behrens, B. A., Brunotte, K., Wester, H., Peddinghausen, J. & Till, M., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 250-255 6 p. (METAL Conference Proeedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  51. Published

    Influence of the microstructure on flow stress and deformability of iron-aluminium alloys

    Peddinghaus, J., Brunotte, K., Wester, H., Till, M., Kock, C. & Behrens, B. A., 30 Jun 2022, 31st International Conference on Metallurgy and Materials, METAL 2022. p. 199-204 6 p. (Proceedings International Conference on Metallurgy and Materials ).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  52. Published

    Design, Characterisation and Numerical Investigations of Additively Manufactured H10 Hybrid-Forging Dies with Conformal Cooling Channels

    Behrens, B. A., Huskic, A., Rosenbusch, D., Peddinghaus, J., Wester, H., Siegmund, M., Giedenbacher, J. & Siring, J., 21 Jun 2022, In: Metals. 12, 7, 1063.

    Research output: Contribution to journal › Article › Research › peer review

  53. Published

    Comparison of three different ductile damage models for deep drawing simulation of high-strength steels

    Behrens, B., Rosenbusch, D., Wester, H. & Althaus, P., 1 May 2022, In: IOP Conference Series: Materials Science and Engineering. 1238, 012021.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Material Characterization and Modeling for Finite Element Simulation of Press Hardening with AISI 420C

    Behrens, B., Rosenbusch, D., Wester, H. & Stockburger, E., Jan 2022, In: Journal of Materials Engineering and Performance. 31, 1, p. 825-832 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  55. Published

    Determination of temperature dependence in Modified-Mohr-Coulomb failure model for process simulation of shear cutting

    Vasquez Ramirez, D., Wester, H., Behrens, B., Kock, C. M. & Brunotte, K., 2022.

    Research output: Contribution to conference › Paper › Research › peer review

  56. Published

    Investigation of a Compression Molding Process for the Variant Flexible Production of a GMT Battery Shell

    Weichenhain, J., Althaus, P., Hübner, S., Wester, H., Rosenbusch, D. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 20-28 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  57. Published

    Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 547-558 12 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  58. Published

    Numerical Investigations on Stresses and Temperature Development of Tool Dies During Hot Forging

    Behrens, B. A., Rosenbusch, D., Wester, H. & Siring, J., 2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). p. 559-568 10 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  59. Published

    Numerical Study on the Influence of the Initial Temperature Distribution on the Material Flow During Die Forging of a Semi-finished Aluminium-Titanium Product

    Büdenbender, C., Wester, H., Uhe, J. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  60. 2021

  61. Published

    Finite Element and Finite Volume Modelling of Friction Drilling HSLA Steel under Experimental Comparison

    Behrens, B. A., Dröder, K., Hürkamp, A., Droß, M., Wester, H. & Stockburger, E., 12 Oct 2021, In: Materials. 14, 20, 17 p., 5997.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und Mikroskala

    Behrens, B. A., Schröder, J., Brands, D., Brunotte, K., Wester, H., Scheunemann, L., Uebing, S. & Kock, C., Sept 2021, In: Forschung im Ingenieurwesen/Engineering Research. 85, 3, p. 757–771 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  63. Published

    Targeted adjustment of residual stresses in hot-formed components by means of process design based on finite element simulation

    Behrens, B. ‐. A., Brunotte, K., Wester, H. & Kock, C., Aug 2021, In: Archive of applied mechanics. 91, 8, p. 3579-3602 24 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  65. Published

    Modelling of an induction heating process and resulting material distribution of a hybrid semi-finished product after impact extrusion

    Behrens, B. A., Wester, H., Schäfer, S. & Büdenbender, C., 14 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 574

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  66. Published

    Numerical evaluation of forging process designs of a hybrid co-extruded demonstrator consisting of steel and aluminium.

    Behrens, B. A., Wester, H., Petersen, T., Uhe, J., Büdenbender, C., Peddinghaus, J. & Chugreeva, A., 14 Apr 2021, ESAFORM 2021 - 24th International Conference on Material Forming. 954

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  67. Published

    Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes

    Behrens, B., Brunotte, K., Hübner, S., Wester, H., Müller, F., Müller, P., Wälder, J. & Matthias, T., 13 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5, 2, 36.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Influence of degree of deformation on welding pore reduction in high-carbon steels

    Behrens, B. A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Budde, L., Saure, F., Mildebrath, M., Coors, T., Faqiri, M. Y. & Büdenbender, C., Apr 2021, In: Production Engineering. 15, 2, p. 161-168 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  69. Published

    Investigations on Residual Stresses within Hot-Bulk-Formed Components Using Process Simulation and the Contour Method

    Behrens, B. A., Gibmeier, J., Brunotte, K., Wester, H., Simon, N. & Kock, C., 31 Mar 2021, In: Metals. 11, 4, 566.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Dynamic Process Forces

    Behrens, B. A., Hübner, S., Wester, H., Rosenbusch, D. & Müller, P., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 102-126 25 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  71. Published

    Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes

    Behrens, B. A., Schröder, J., Wester, H., Brands, D., Uebing, S. & Kock, C., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). p. 2289-2301 13 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  72. Published

    Experimental Characterisation of Tool Hardness Evolution Under Consideration of Process Relevant Cyclic Thermal and Mechanical Loading During Industrial Forging

    Müller, F., Malik, I., Wester, H. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 3-12 10 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  73. Published

    Fracture Characterisation by Butterfly-Tests and Damage Modelling of Advanced High Strength Steels

    Behrens, B. A., Brunotte, K., Wester, H. & Dykiert, M., 2021, In: Key Engineering Material:KEM. 883, p. 294-302 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  74. Published

    Numerical Calculation of Tool Wear in Industrial Cold Forming Processes Using the Further Development of Wear Modelling

    Behrens, B. A., Wester, H., Matthias, T., Hübner, S., Müller, P. & Wälder, J., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 535-552 18 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  75. Published

    Numerical Investigation of an Extruded Shaft for High Temperature Applications Manufactured by Tailored Forming

    Büdenbender, C., Ross, I., Wester, H., Zaitsev, A. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 182-192 11 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  76. Published

    Residual Stresses in Hot Bulk Formed Parts—A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation

    Uebing, S., Brands, D., Scheunemann, L., Kock, C., Wester, H., Behrens, B. A. & Schröder, J., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). p. 2345-2355 11 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  77. 2020

  78. Published

    Multi-Layer Wear and Tool Life Calculation for Forging Applications Considering Dynamical Hardness Modeling and Nitrided Layer Degradation

    Behrens, B. A., Brunotte, K., Wester, H., Rothgänger, M. & Müller, F., 29 Dec 2020, In: MATERIALS. 14, 1, p. 1-16 16 p., 104.

    Research output: Contribution to journal › Article › Research › peer review

  79. Published

    Characterization and modeling of intermetallic phase formation during the joining of aluminum and steel in analogy to co-extrusion

    Behrens, B. A., Maier, H. J., Klose, C., Wester, H., Thürer, S. E., Heimes, N. & Uhe, J., 26 Nov 2020, In: Metals. 10, 12, p. 1-16 16 p., 1582.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale

    Heimes, N., Uhe, J., Thürer, S. E., Wester, H., Maier, H., Klose, C. & Behrens, B., 25 Sept 2020, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP). Berlin: Springer Berlin, p. 66-75 10 p. (Lecture Notes in Production Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  81. Published

    Experimental investigations on the interactions between the process parameters of hot forming and the resulting residual stresses in the component

    Behrens, B. A., Brunotte, K., Wester, H. & Kock, C., 4 Sept 2020, In: Procedia Manufacturing. 50, p. 706-712 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  82. Published

    Fracture modelling of magnesium sheet alloy AZ31 for deep drawing processes at elevated temperatures

    Behrens, B. A., Wester, H. & Dykiert, M., 4 Sept 2020, In: Procedia Manufacturing. 50, p. 739-743 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  83. Published

    Hot forming limit curves for numerical press hardening simulation of AISI 420C

    Behrens, B. A., Uhe, J., Wester, H. & Stockburger, E., 25 Aug 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 350-355 6 p. (Proceedings of the conference were published in Web of Science and Scopus).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  84. Published

    Investigation Of The Process Window For Deformation Induced Ferrite To Improve The Joinability Of Press-Hardened Components

    Behrens, B. A., Brunotte, K., Wester, H. & Stockburger, E., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 579-584 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  85. Published

    Numerical Service Life Calculation Of Forming Tools During Thixoforging Using The Sehitoglu Model

    Behrens, B. A., Brunotte, K., Wester, H., Zaitsev, A. & Hootak, M., 27 Jul 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 320-326 7 p. (METAL Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  86. Published

    Practical Process Characterisation For Hot-Stamping Regarding The Heat Transfer Coefficient Using A Numerical And Experimental Coupled Method

    Behrens, B. A., Brunotte, K., Wester, H. & Müller, F., 27 Jul 2020, Proceedings 29th International Conference on Metallurgy and Materials. p. 573-578 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  87. Published

    FE-based Layer Design of Deposition-Welded Semi-finished Parts for the Production of Hybrid Bevel Gear

    Behrens, B. A., Uhe, J., Wester, H., Matthias, T. & Büdenbender, C., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 309-314 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  88. Published

    Experimental and Numerical Investigations on the Combined Forming Behaviour of DX51 and Fibre Reinforced Thermoplastics Under Deep Drawing Conditions

    Behrens, B. A., Chugreev, A. & Wester, H., 4 Mar 2020, Virtual Design and Validation. Cham: Springer Nature Switzerland AG, p. 123-146 24 p. (Lecture Notes in Applied and Computational Mechanics; vol. 93).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  89. Published

    Investigation of the Influence of an Oscillation Superposition on the Wear Behaviour in an Industrial-like Process

    Behrens, B. A., Wester, H., Matthias, T., Hübner, S., Wälder, J. & Müller, P., 2020, In: Procedia Manufacturing. 47, p. 315-320 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  90. 2019

  91. Published

    Investigation of the forming limit behavior of martensitic chromium steels for hot sheet metal forming: Untersuchung der Grenzformänderung martensitischer Chromstähle für die Warmblechumformung

    Stockburger, E., Wester, H., Uhe, J., Brunotte, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. p. 159-168 10 p. Chapter 16

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  92. Published

    Experimental and numerical characterization method for forming behavior of thermoplastics reinforced with woven fabrics

    Behrens, B. A., Chugreev, A. & Wester, H., 2019, In: Procedia Manufacturing. 29, p. 443-449 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  93. 2018

  94. Published

    Forming and Oxidation Behavior During Forging with Consideration of Carbon Content of Steel

    Graf, M., Ullmann, M., Korpala, G., Wester, H., Awiszus, B., Kawalla, R. & Behrens, B. A., Dec 2018, In: Metals. 8, 12, 996.

    Research output: Contribution to journal › Article › Research › peer review

  95. Published

    Experimental and Numerical Investigations on the Material Behaviour of Fibre-Reinforced Plastics and Steel for a Multi-material Compound Production

    Wester, H., Chugreev, A., Moritz, J. & Behrens, B., 20 Nov 2018, Advances in Production Research: Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP). Schmitt, R. & Schuh, G. (eds.). Springer International Publishing AG, p. 218-227 10 p. Chapter 22

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  96. Published

    Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging

    Behrens, B. A., Chugreev, A., Awiszus, B., Graf, M., Kawalla, R., Ullmann, M., Korpala, G. & Wester, H., Feb 2018, In: Metals. 8, 2, 140.

    Research output: Contribution to journal › Article › Research › peer review

  97. 2017

  98. Published

    Numerical Investigation of the Oxide Scale Deformation Behaviour with Consideration of Carbon Content during Hot Forging

    Behrens, B. A., Kawalla, R., Awiszus, B., Bouguecha, A., Ullmann, M., Graf, M., Bonk, C., Chugreev, A. & Wester, H., 15 Nov 2017, In: Procedia Engineering. 207, p. 526-531 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  99. Published

    Modelling the Influence of Carbon Content on Material Behavior during Forging

    Korpała, G., Ullmann, M., Graf, M., Wester, H., Bouguecha, A., Awiszus, B., Behrens, B. A. & Kawalla, R., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. Brabazon, D., Ul Ahad, I. & Naher, S. (eds.). American Institute of Physics Inc., 190013. (AIP Conference Proceedings; vol. 1896).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review