Profile picture not found

Hendrik Wester

View graph of relations
1 - 20 out of 84Page size: 20

Publications

  1. 2024
  2. Published

    Deep drawing of coated aluminium sheets: Experimental and numerical study

    Abdennadher, M., Sellami, A., Stockburger, E., Mohnfeld, N., Wester, H., Behrens, B., Bouguecha, A. & Elleuch, R., 20 Nov 2024, In: Materialwissenschaft und Werkstofftechnik. 55, 11, p. 1455-1609

    Research output: Contribution to journal › Article › Research › peer review

  3. E-pub ahead of print

    Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles

    Mohnfeld, N., Dewidar, A., Qarbi, K., Wester, H., Schäfke, F. P., Verschinin, A., Maier, H. J., Barton, S., Klose, C. & Uhe, J., 13 Nov 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Characterisation of oxide scale layers on iron based steels on the nanoscale for hot forging

    Behrens, B., Uhe, J., Lampke, T., Bergelt, T., Graf, M., Wester, H., Peddinghaus, S. & Mohnfeld, N., 26 Jun 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 280-285

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Development of a test setup for the experimental determination of the heat transfer coefficient for compound forging

    Behrens, B., Uhe, J., Wester, H. & Mohnfeld, N., 26 Jun 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 75-80

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Influence of deformation on the interface properties of coated fuselage shells

    Jepkens, J., Mohnfeld, N., Müller, P., Wester, H., Hübner, S., Wehrmann, S. & Behrens, B., 26 Jun 2024, Proceedings 33rd International Conference on Metallurgy and Materials . p. 239-244 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Numerical Investigation of Punch Radius and Shape Effects on the Formability of Coated Aluminum Sheet in Deep Drawing

    Abdennadher, M., Bouguecha, A., Stockburger, E., Wester, H., Behrens, B. A. & Elleuch, R., 24 Mar 2024, Advances in Materials, Mechanics and Manufacturing III : Proceedings of The Fourth International Conference on Advanced Materials, Mechanics and Manufacturing (A3M’2023). Ben Amar, M., Trabelsi, H., Ghorbel, E., Tounsi, D., El Mahi, A., Haddar, M., Ben Souf, M. A., Beyaoui, M. & Chaari, F. (eds.). Springer Science and Business Media Deutschland GmbH, p. 373-379 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

    Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  9. Published

    Analysis of Semi-Hot Forming Behaviour of AA7075 Sheet Metal

    Vasquez Ramirez, D., Wester, H., Rosenbusch, D. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 345-355 11 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  10. Published

    Numerical investigation of rotational friction welding for C22.8 - 41Cr4 joints using a substitute model

    Mohnfeld, N., Wester, H., Tunc Karaer, G., Piwek, A. & Uhe, J., 2024, Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 1668-1677 10 p. (Material Forming: ESAFORM 2024).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Numerical Modelling of Transformation-Induced Plasticity in Hot Forging Simulations

    Mohnfeld, N., Uhe, J., Wester, H., Kock, C. & Behrens, B. A., 2024, Lecture Notes in Production Engineering. Springer Nature, p. 609-618 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  12. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. Published

    Using computer vision to analyse fracture strains of oxide scale layers on a macro level

    Wester, H., Hunze-Tretow, J. N., Brunotte, K. & Behrens, B. A., 2024, Material Forming: The 27th International ESAFORM Conference on Material Forming . Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 802-811 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  15. 2023
  16. Published

    Simulation and Validation of an Incremental Bending Process for Cylindrical Fuselage Components

    Jepkens, J., Müller, P., Wester, H., Hübner, S., Wehrmann, S. & Behrens, B., 24 Dec 2023, In: Aerospace. 11, 1, 14.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Characterisation and Qualification of Hot Working Tool Steels and Inconel for the Production of a Hybrid Forging Die

    Siring, J., Till, M., Wester, H., Uhe, J. & Brunotte, K., 18 Nov 2023, Lecture Notes in Production Engineering. p. 638–647 10 p. (Lecture Notes in Production Engineering; vol. Part F1764).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  18. Published

    Investigation into the Manufacture of Hybrid Wear Resistant Forging Tools using Tailored Forming Technology

    Till, M., Siring, J., Wester, H., Peddinghaus, J., Uhe, J. & Brunotte, K., 9 Nov 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    Fracture Characterisation and Modelling of AHSS Using Acoustic Emission Analysis for Deep Drawing

    Stockburger, E., Wester, H. & Behrens, B. A., 5 Jul 2023, In: Journal of Manufacturing and Materials Processing. 7, 4, 127.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading

    Behrens, B., Stockburger, E., Wester, H., Poll, G., Pape, F., Konopka, D. & Heimes, N., 30 Jun 2023, In: Lubricants. 11, 7, 14 p., 283.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Experimental and numerical investigation of dynamic transformation induced plasticity during hot forming

    Behrens, B., Uhe, J., Wester, H., Kock, C. & Heimes, N., 13 Jun 2023, METAL Conference Proeedings. p. 164-169

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  22. Published

    Influence of Deformation on the Coating Properties of aircraft fuselage shells

    Jepkens, J., Heimes, N., Wester, H., Müller, P., Hübner, S., Wehrmann, S., Müller, M. & Behrens, B., 13 Jun 2023, METAL Conference Proeedings. p. 380-385

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Previous 1 2 3 4 5 Next