Loading [MathJax]/extensions/tex2jax.js
Profile information

Dr.  Florian Nürnberger

https://orcid.org/0000-0002-7824-0675
1 - 162 out of 162Page size: 500
Order:

Publications

  1. 2025

  2. Published

    Inverse determination of the thermal contact conductance for an interface between a Co28Cr6Mo hip stem and a PMMA-based bone cement

    Evers, P., Reulbach, M., Emonde, C., Windhagen, H., Jakubowitz, E., Herbst, S., Maier, H. J. & Nürnberger, F., 13 Feb 2025, In: Scientific reports. 15, 1, 5328.

    Research output: Contribution to journal › Article › Research › peer review

  3. 2024

  4. Published

    Magnetic Triggering of Functional Organosilica Filler Particles for Controlling the Thermoreversible Attachment to Polymer Matrices

    Hagemann, V., Finck, L., Klempt, F., Evers, P., Nürnberger, F., Morales, I., Ehlert, N., Junker, P., Behrens, P., Menzel, H. & Polarz, S., 12 Nov 2024, In: LANGMUIR. 40, 45, p. 23706–23713 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  5. E-pub ahead of print

    Intermetallic Compound Layer Morphology and Distribution in Friction-Welded Steel–Aluminum Components

    Kahra, C., Piwek, A., Peddinghaus, J., Brunotte, K., Maier, H. J., Nürnberger, F. & Herbst, S., 10 Oct 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Contextualization for Generating FAIR Data: A Dynamic Model for Documenting Research Activities

    Altun, O., Hinterthaner, M., Barienti, K., Nürnberger, F., Lachmayer, R., Mozgova, I., Koepler, O. & Auer, S., 28 Jun 2024, Product Lifecycle Management. Leveraging Digital Twins, Circular Economy, and Knowledge Management for Sustainable Innovation - 20th IFIP WG 5.1 International Conference, PLM 2023, Revised Selected Papers. Danjou, C., Harik, R., Nyffenegger, F., Rivest, L. & Bouras, A. (eds.). Springer Science and Business Media Deutschland GmbH, p. 116-126 11 p. (IFIP Advances in Information and Communication Technology; vol. 701 IFIPAICT).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Characterization and Modeling of the Inductive Heating of CoCrMo Hip Implants to Facilitate Intentional Removal

    Evers, P., Suhr, T., Reulbach, M., Emonde, C., Jakubowitz, E., Windhagen, H. & Nürnberger, F., 26 Jun 2024, 2024 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2024 - Proceedings. Institute of Electrical and Electronics Engineers Inc.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Corrosion fatigue behavior of nanoparticle modified iron processed by electron powder bed fusion

    Wackenrohr, S., Torrent, C. J. J., Herbst, S., Nürnberger, F., Krooss, P., Frenck, J. M., Ebbert, C., Voigt, M., Grundmeier, G., Niendorf, T. & Maier, H. J., 8 May 2024, In: npj Materials Degradation. 8, 1, 49.

    Research output: Contribution to journal › Article › Research › peer review

  9. 2023

  10. Published

    The Fe-C diagram: History of its evolution

    Gutnyk, M. & Nürnberger, F., 23 Dec 2023, In: History of Science and Technology. 13, 2, p. 243-262 20 p.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Implications of ageing effects on thermal and mechanical properties of PMMA-based bone cement for THA revision surgery

    Reulbach, M., Evers, P., Emonde, C., Behnsen, H., Nürnberger, F., Windhagen, H. & Jakubowitz, E., Dec 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 148, 106218.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Patterning of Surfaces for Subsequent Roll Bonding in a Low-Oxygen Environment Using Deformable Mesh Inlays

    Frolov, Y., Bobukh, O., Samsonenko, A. & Nürnberger, F., 2 Sept 2023, In: Journal of Manufacturing and Materials Processing. 7, 5, 158.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Electroplasticity Mechanisms in hcp Materials

    Herbst, S., Karsten, E., Gerstein, G., Reschka, S., Nürnberger, F., Zaefferer, S. & Maier, H. J., Sept 2023, In: Advanced engineering materials. 25, 18, 2201912.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Correlating Ultrasonic Velocity in DC04 with Microstructure for Quantification of Ductile Damage

    Wackenrohr, S., Herbst, S., Wöbbeking, P., Gerstein, G. & Nürnberger, F., 7 Aug 2023, In: Journal of Manufacturing and Materials Processing. 7, 4, 142.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions

    Raumel, S., Barienti, K., Luu, H. T., Merkert, N., Dencker, F., Nürnberger, F., Maier, H. J. & Wurz, M. C., Aug 2023, In: Friction. 11, 8, p. 1505–1521 17 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Non-destructive Evaluation of Workpiece Properties along the Hybrid Bearing Bushing Process Chain

    Fricke, L. V., Thürer, S. E., Kahra, C., Bährisch, S., Herbst, S., Nürnberger, F., Behrens, B. A., Maier, H. J., Klose, C. & Barton, S., Aug 2023, In: Journal of Materials Engineering and Performance. 32, 15, p. 7004-7015 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    A novel way to reduce the critical deformation for cold roll bonding

    Barienti, K., Werwein, S., Herbst, S., Maier, H. J. & Nürnberger, F., Jul 2023, In: Manufacturing Letters. 36, p. 9-12 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Oxygen-Free Compound Casting of Aluminum and Copper in a Silane-Doped Inert Gas Atmosphere: A New Approach to Increase Thermal Conductivity

    Fromm, A. C., Barienti, K., Selmanovic, A., Thürer, S. E., Nürnberger, F., Maier, H. J. & Klose, C., Jul 2023, In: International Journal of Metalcasting. 17, 3, p. 2171-2183 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Enhanced findability and reusability of engineering data by contextual metadata

    Altun, O., Oladazimi, P., Wawer, M. L., Raumel, S., Wurz, M., Barienti, K., Nürnberger, F., Lachmayer, R., Mozgova, I., Koepler, O. & Auer, S., 19 Jun 2023, In: Proceedings of the Design Society. 3, p. 1635-1644 10 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  20. 2022

  21. Published

    Investigations on Additively Manufactured Stainless Bearings

    Coors, T., Faqiri, M. Y., Saure, F., Kahra, C., Büdenbender, C., Peddinghaus, J., Prasanthan, V., Pape, F., Hassel, T., Herbst, S., Nürnberger, F., Wester, H., Uhe, J., Breidenstein, B., Denkena, B., Behrens, B. A., Poll, G. & Maier, H. J., 8 Nov 2022, In: COATINGS. 12, 11, 1699.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Ontology-Based Documentation of Quality Assurance Measures Using the Example of a Visual Inspection

    Sheveleva, T., Herrmann, K., Wawer, M. L., Kahra, C., Nürnberger, F., Koepler, O., Mozgova, I., Lachmayer, R. & Auer, S., 4 Sept 2022, Advances in System-Integrated Intelligence: Proceedings of the 6th International Conference on System-Integrated Intelligence SysInt 2022, Genova, Italy. Valle, M., Lehmhus, D., Gianoglio, C., Ragusa, E., Seminara, L., Bosse, S., Ibrahim, A. & Thoben, K.-D. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 415-424 10 p. (Lecture Notes in Networks and Systems; vol. 546 LNNS).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Published

    Cu-Ni-Based Alloys from Nanopowders as Potent Thermoelectric Materials for High-Power Output Applications

    Wolf, M., Flormann, J., Steinhoff, T., Gerstein, G., Nürnberger, F., Maier, H. J. & Feldhoff, A., Jun 2022, In: Alloys. 1, 1, p. 3-14 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Corrosion fatigue behavior of electron beam melted iron in simulated body fluid

    Wackenrohr, S., Torrent, C. J. J., Herbst, S., Nürnberger, F., Krooss, P., Ebbert, C., Voigt, M., Grundmeier, G., Niendorf, T. & Maier, H. J., 8 Mar 2022, In: npj Materials Degradation. 6, 1, 18.

    Research output: Contribution to journal › Article › Research › peer review

  25. Published

    Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished Products

    Thürer, S. E., Peters, K., Heidenblut, T., Heimes, N., Peddinghaus, J., Nürnberger, F., Behrens, B. A., Maier, H. J. & Klose, C., 1 Mar 2022, In: Materials. 15, 5, 18 p., 1692.

    Research output: Contribution to journal › Article › Research › peer review

  26. Published

    Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System: a Use Case from Production Engineering

    Sheveleva, T., Wawer, M. L., Oladazimi, P., Koepler, O., Nürnberger, F., Lachmayer, R., Auer, S. & Mozgova, I., 2022, In: IFAC-PapersOnLine. 55, 10, p. 2030-2035 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  27. Published

    Effect of tension on the formation of local voids and integral damages in DC04 steel sheets

    Briukhanov, A., Gerstein, G., Volchok, N., Numberger, F., Lukashin, V. & Dyachok, D., 2022, In: Functional Materials. 29, 4, p. 521-529 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  28. 2021

  29. Published

    Strain path dependency in incremental sheet-bulk metal forming

    Wernicke, S., Hahn, M., Gerstein, G., Nürnberger, F. & Tekkaya, A. E., Jul 2021, In: International Journal of Material Forming. 14, 4, p. 547-561 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Cold roll bonding of tin-coated steel sheets with subsequent heat treatment

    Hordych, I., Barienti, K., Herbst, S., Maier, H. J. & Nürnberger, F., 4 Jun 2021, In: Metals. 11, 6, 917.

    Research output: Contribution to journal › Article › Research › peer review

  31. Published

    Hot forming of shape memory alloys in steel shells: formability, interface, bonding quality

    Gerstein, G., Kahra, C., Golovko, O., Schäfke, F., Klose, C., Herbst, S., Nürnberger, F. & Maier, H., Apr 2021, In: Production Engineering. 15, 2, p. 271-283 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal Forming

    Hinz, L., Metzner, S., Müller, P., Schulte, R., Besserer, H. B., Wackenrohr, S., Sauer, C., Kästner, M., Hausotte, T., Hübner, S., Nürnberger, F., Schleich, B., Behrens, B. A., Wartzack, S., Merklein, M. & Reithmeier, E., 30 Mar 2021, In: Sensors. 21, 7, 31 p., 2389.

    Research output: Contribution to journal › Article › Research › peer review

  33. Published

    Einfluss von Silan-dotierten Umgebungsatmosphären auf tribologischen Eigenschaften von Titan

    Raumel, S., Barienti, K., Dencker, F., Nuernberger, F. & Wurz, M., 22 Mar 2021, In: Tribologie und Schmierungstechnik. 68, 1, p. 5-13 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  34. Published

    Einfluss von Silan-dotierten Umgebungsatmosphären auf tribologischen Eigenschaften von Titan

    Raumel, S., Barienti, K., Dencker, F., Nürnberger, F. & Wurz, M. C., Mar 2021, In: Tribologie und Schmierungstechnik. 68, 1, p. 5-13 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool Steels

    Schulz, A., Cui, C., Steinbacher, M., Ümit, T., Wunde, M., Jung, I., Acar, S., Nürnberger, F., Gerstein, G., Herbst, S. & Maier, H. J., 23 Feb 2021, In: HTM - Journal of Heat Treatment and Materials. 75, 5, p. 287-307 21 p.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    Contact geometry modification of friction-welded semi-finished products to improve the bonding of hybrid components

    Behrens, B. A., Uhe, J., Petersen, T., Nürnberger, F., Kahra, C., Ross, I. & Laeger, R., 8 Jan 2021, In: Metals. 11, 1, p. 1-15 115.

    Research output: Contribution to journal › Article › Research › peer review

  37. Published

    Evaluation of Cu­Ni­Based Alloys for Thermoelectric Energy Conversion

    Steinhoff, T., Wolf, M., Nürnberger, F., Gerstein, G. & Feldhoff, A., 5 Jan 2021, In: Materials Science Forum. 1016, p. 107-112 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  38. Published

    Influence of Pre-strain on Very-Low-Cycle Stress–Strain Response and Springback Behavior

    Barienti, K., Klein, M., Wackenrohr, S., Herbst, S., Nürnberger, F. & Maier, H. J., Jan 2021, In: Journal of Materials Engineering and Performance. 30, 1, p. 33-41 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Analysis of Path-Dependent Damage and Microstructure Evolution for Numerical Analysis of Sheet-Bulk Metal Forming Processes

    Gutknecht, F., Gerstein, G., Isik, K., Tekkaya, A. E., Maier, H. J., Clausmeyer, T. & Nürnberger, F., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 378-411 34 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  40. Published

    Fatigue Behavior of Sheet-Bulk Metal Formed Components

    Besserer, H. B., Nürnberger, F. & Maier, H. J., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 412-433 22 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  41. Published

    Fatigue Life Compliant Process Design for the Manufacturing of Cold Die Rolled Components

    Wackenrohr, S., Nürnberger, F. & Maier, H. J., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 568-585 18 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  42. Published

    Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075

    Behrens, B. A., Hübner, S., Vogt, H., Golovko, O., Behrens, S. & Nürnberger, F., 2021, Forming the Future : Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). p. 959-971 13 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  43. 2020

  44. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. Published

    Mechanical properties and formability of en AW-7075 in cold forming processes

    Behrens, B. A., Hübner, S., Vogt, H., Golovko, O., Behrens, S. & Nürnberger, F., 17 Nov 2020, In: IOP Conference Series: Materials Science and Engineering. 967, 1, 012017.

    Research output: Contribution to journal › Conference article › Research › peer review

  46. Published

    Investigations on tailored forming of aisi 52100 as rolling bearing raceway

    Coors, T., Mildebrath, M., Büdenbender, C., Saure, F., Faqiri, M. Y., Kahra, C., Prasanthan, V., Chugreeva, A., Matthias, T., Budde, L., Pape, F., Nürnberger, F., Hassel, T., Hermsdorf, J., Overmeyer, L., Breidenstein, B., Denkena, B., Behrens, B. A., Maier, H. J. & Poll, G., 13 Oct 2020, In: Metals. 10, 10, p. 1-19 19 p., 1363.

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Microstructural evolution and mechanical properties of hybrid bevel gears manufactured by tailored forming

    Behrens, B. A., Chugreeva, A., Diefenbach, J., Kahra, C., Herbst, S., Nürnberger, F. & Maier, H. J., 13 Oct 2020, In: Metals. 10, 10, p. 1-14 14 p., 1365.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Improving the Accuracy of FE Simulations of Induction Tempering Toward a Microstructure-Dependent Electromagnetic Model

    Baldan, M., Stolte, M. H., Nacke, B. & Nurnberger, F., 5 Aug 2020, In: IEEE transactions on magnetics. 56, 10, 9159684.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Tailoring Soft Local Zones in Quenched Blanks of the Steel 22MnB5 by Partial Pre-cooling with Compressed Air

    Golovko, O., Stolte, M. H., Wölki, K., Hübner, S., Behrens, B. A., Maier, H. J. & Nürnberger, F., Jul 2020, In: Journal of Materials Engineering and Performance. 29, 7, p. 4379-4389 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  50. Published

    Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored properties

    Coors, T., Pape, F., Kruse, J., Blohm, T., Beermann, R., Quentin, L., Herbst, S., Langner, J., Stonis, M., Kästner, M., Reithmeier, E., Nürnberger, F. & Poll, G., 9 Jun 2020, In: International Journal of Advanced Manufacturing Technology. 108, 7-8, p. 2409-2417 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Testing of formed gear wheels at quasi-static and elevated strain rates

    Clausmeyer, T., Gutknecht, F., Gerstein, G. & Nürnberger, F., 26 Apr 2020, In: Procedia Manufacturing. 47, p. 623-628 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  52. Published

    Manufacturing and Virtual Design to Tailor the Properties of Boron-Alloyed Steel Tubes

    Hordych, I., Herbst, S., Nürnberger, F., Boiarkin, V., Hubert, O. & Maier, H. J., 4 Mar 2020, Virtual Design and Validation . Cham: Springer Nature, p. 21-44 24 p. (Lecture Notes in Applied and Computational Mechanics; vol. 93).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  53. Published

    Heat Transfers Coefficients of Directly and Indirectly Cooled Component Areas during Air-Water Spray Cooling

    Kahra, C., Nürnberger, F., Maier, H. J. & Herbst, S., 18 Feb 2020, In: HTM - Journal of Heat Treatment and Materials. 76, 1, p. 64-75 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Ion Beam Processing for Sample Preparation of Hybrid Materials with Strongly Differing Mechanical Properties

    Barienti, K., Kahra, C., Herbst, S., Nürnberger, F. & Maier, H. J., 22 Jan 2020, In: Metallography, Microstructure, and Analysis. 9, p. 54-60 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  55. Published

    Augenimplantat

    Maier, H. J. (Inventor), Nürnberger, F. (Inventor), Karsten, E. (Inventor) & Rodmann, D. (Inventor), 2 Jan 2020, IPC No. G12B 1/ 02 A I, Patent No. DE102018121101, Priority date 29 Aug 2018, Priority No. DE201810121101

    Research output: Patent

  56. Published

    Analyse der belastungspfadabhängigen Schädigungs- und Mikrostrukturentwicklung zur numerischen Auslegung von Blechmassivumformprozessen

    Gerstein, G., Gutknecht, F., Clausmeyer, T. & Nürnberger, F., 2020, Aktuelle Entwicklungen im Bereich der Umformtechnik. Behrens, B.-A. (ed.). 2020 ed. Garbsen, p. 185-186

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  57. Published

    Casting Manufacturing of Cylindrical Preforms Made of Low Alloy Steels

    Demler, E., Götze, S., Herbst, S., Nürnberger, F., Maier, H. J., Ursinus, J., Büdenbender, C. & Behrens, B. A., 2020, In: Procedia Manufacturing. 47, p. 445-449 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  58. Published

    Porosity in hot formed cast steel

    Behrens, B. A., Ursinus, J., Büdenbender, C., Brunotte, K., Nürnberger, F., Demler, E. & Maier, H. J., 2020, METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings. p. 283-288 6 p. (International Conference on Metallurgy and Materials, Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  59. Published

    Tailored Forming of Hybrid Bevel Gears with Integrated Heat Treatment

    Behrens, B. A., Diefenbach, J., Chugreeva, A., Kahra, C., Herbst, S. & Nürnberger, F., 2020, In: Procedia Manufacturing. 47, p. 301-308 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  60. 2019

  61. Published

    Visualization and Observation of Morphological Peculiarities of Twin Formation in Mg-Based Samples After Electrically Assisted Forming

    Reschka, S., Gerstein, G., Dalinger, A., Herbst, S., Nürnberger, F. & Zaefferer, S., Dec 2019, In: Metallography, Microstructure, and Analysis. 8, 6, p. 806-814 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    Hot forming of cast steel cylinders

    Ursinus, J., Bonhage, M., Büdenbender, C., Nürnberger, F., Demler, E. & Behrens, B., 4 Nov 2019, Proceedings 28th International Conference on Metallurgy and Materials . p. 501-506 6 p. (Metal Conference Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  63. Published

    Influence of Alternating Short-Cycle Bending on the Mechanical Properties of Copper, α-Titanium and the Mild Steel DC01

    Barienti, K., Wolff, D., Herbst, S., Nürnberger, F. & Maier, H. J., Nov 2019, In: Journal of Materials Engineering and Performance. 28, 11, p. 7165-7170 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Joining of blanks by cold pressure welding: Incremental rolling and strategies for surface activation and heat treatment

    Schmidt, H. C., Homberg, W., Orive, A. G., Grundmeier, G., Duderija, B., Hordych, I., Herbst, S., Nürnberger, F. & Maier, H. J., 7 Aug 2019, In: Materialwissenschaft und Werkstofftechnik. 50, 8, p. 924-939 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  65. Published

    Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale

    Zeller, S., Baldrich, M., Gerstein, G., Nürnberger, F., Löhnert, S., Maier, H. J. & Wriggers, P., Aug 2019, In: Journal of the Mechanics and Physics of Solids. 129, p. 205-228 24 p.

    Research output: Contribution to journal › Article › Research › peer review

  66. Published

    The Role of Heat-Treatments performed before and after a Cold Roll Bonding Process of Galvanized Steel Sheets

    Hordych, I., Herbst, S., Nürnberger, F., Schmidt, H. C., Orive, A. G., Homberg, W., Grundmeier, G. & Maier, H. J., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics Inc., 7 p. 050017. (AIP Conference Proceedings; vol. 2113, no. 1).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  67. Published

    Präparationsmethoden zur rasterelektronenmikroskopischen Charakterisierung von Nanokarbiden im Kaltarbeitsstahl X153CrMoV12

    Acar, S., Gerstein, G., Nürnberger, F., Cui, C. & Schulz, A., 15 May 2019, In: Praktische Metallographie/Practical Metallography. 56, 5, p. 303-316 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Effect of Low-Temperature Annealings on the Change in the Level of Microdamage of Sheets of the Dual DP-600 Steel

    Bryukhanov, A. A., Gerstein, G., Volchok, N. A., Bryukhanova, Z. A. & Nürnberger, F., 1 May 2019, In: Physics of Metals and Metallography. 120, 5, p. 506-512 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  69. Published

    Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts

    Behrens, B. A., Breidenstein, B., Duran, D., Herbst, S., Lachmayer, R., Löhnert, S., Matthias, T., Mozgova, I., Nürnberger, F., Prasanthan, V., Siqueira, R., Töller, F. & Wriggers, P., 3 Apr 2019, In: HTM - Journal of Heat Treatment and Materials. 74, 2, p. 115-135 21 p.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Analyse und Modellierung von Schädigung und Versagen in der Blechmassivumformung

    Gerstein, G., Clausmeyer, T., Nuernberger, F., Gutknecht, F., Isik, K., Besserer, H., Wernicke, S., Schulte, R., Tekkaya, A. E., Merklein, M. & Maier, H., 2019, 4. Workshop Blechmassivumformung: Umformtechnische Herstellung von komplexen Funktionsbauteilen mit Nebenformelementen aus Feinblechen. Merklein, M., Behrens, B.-A. & Tekkaya, A. E. (eds.). p. 33-60

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  71. Published

    Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool Steel

    Gerstein, G., Acar, S., Nuernberger, F., Cui, C., Schulz, A., Steinbacher, M., Wunde, M. & Kurzynski, J., 2019, Tooling 2019 conference & exhibition. Broeckmann, C. (ed.). p. 31-31 1 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  72. Published

    Development of an intelligent hot-working steel to increase the tool wear resistance

    Gerstein, G., Behrens, B., Puppa, J. H., Acar, S., Nuernberger, F. & Lorenz, U., 2019, Tooling 2019 conference & exhibition. Broeckmann, C. (ed.). p. 64-64 1 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  73. Published

    Erzeugung duktiler Bereiche beim Formhärten: Erzeugung von Bereichen reduzierter Festigkeit beim Formhärten mittels einer Temperierungsstation

    Behrens, B. A., Hübner, S., Yarcu, S., Wölki, K., Maier, H. J., Golovko, O. & Nürnberger, F., 2019, In: wt Werkstattstechnik online. 109, 10, p. 750-754 5 p.

    Research output: Contribution to journal › Article › Research

  74. 2018

  75. Published

    Characterization of Heat Transfer in Complex Air-Water Spray Quenching Set-Ups

    Herbst, S. & Nuernberger, F., Nov 2018, QDE2018: International Conference on Quenching and Distortion Engineering (Nagoya, Japan, 27.11.-29.11.2018).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  76. Published

    Strategies for the Heat Treatment of Steel-Aluminium Hybrid Components

    Herbst, S., Maier, H. J. & Nürnberger, F., 10 Oct 2018, In: HTM - Journal of Heat Treatment and Materials. 73, 5, p. 268-282 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  77. Published

    Effect of Electrical Pulses on the Mechanical Behavior of Single Crystals of Nickel-Based CMSX-4 Superalloy and the Mobility of Low-Angle Grain Boundary in Aluminum Bicrystals

    Demler, E., Gerstein, G., Dalinger, A., Nürnberger, F., Epishin, A. & Molodov, D. A., 1 Oct 2018, In: Bulletin of the Russian Academy of Sciences: Physics. 82, 9, p. 1079-1085 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  78. Published

    Experimental setup to characterize flow-induced anisotropy of sheet metals

    Gutknecht, F., Gerstein, G., Traphöner, H., Clausmeyer, T. & Nürnberger, F., 21 Sept 2018, In: IOP Conference Series: Materials Science and Engineering. 418, 1, 012085.

    Research output: Contribution to journal › Conference article › Research › peer review

  79. Published

    Effect of Different Intercritical Annealing Treatments without and with Overaging on the Mechanical Material Behavior

    Wolf, L. O., Cordebois, J. P., Rodman, D., Nürnberger, F. & Maier, H. J., 31 Jul 2018, In: Steel research international. 89, 10, 1800196.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Influence of Heat-Pretreatments on the Microstructural and Mechanical Properties of Galfan-Coated Metal Bonds

    Hordych, I., Rodman, D., Nürnberger, F., Schmidt, H. C., Orive, A. G., Homberg, W., Grundmeier, G. & Maier, H. J., 3 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 040007. (AIP Conference Proceedings; vol. 1960).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  81. Published

    Verfahren zur Herstellung eines Bauteils

    Maier, H. J. (Inventor), Möhwald, K. (Inventor), Klose, C. (Inventor), Holländer, U. (Inventor), Nürnberger, F. (Inventor), Hassel, T. (Inventor), Reimche, W. (Inventor) & Rodman, D. (Inventor), 8 Feb 2018, IPC No. C23G 5/ 00 A I, Patent No. DE102016121656, Priority date 11 Nov 2016, Priority No. DE201610121656

    Research output: Patent

  82. Published

    The Influence of Alternating Low-Cycle Bending Loads on Sheet Properties Having an Hcp Crystal Lattice

    Demler, E., Rodman, D., Rodman, M., Gerstein, G., Grydin, O., Briukhanov, A. A., Klose, C., Nürnberger, F. & Maier, H. J., 11 Jan 2018, In: Journal of Materials Engineering and Performance. 27, 2, p. 541-549 9 p.

    Research output: Contribution to journal › Review article › Research › peer review

  83. Published

    Evaluation of micro-damage by acoustic methods

    Gerstein, G., Briukhanov, A., Gutknecht, F., Volchok, N., Clausmeyer, T., Nürnberger, F., Tekkaya, A. E. & Maier, H. J., 2018, In: Procedia Manufacturing. 15, p. 527-534 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  84. Published

    Influence of High Current-Density Impulses on the Stress-Strain Response and Microstructural Evolution of the Single Crystal Superalloy CMSX-4

    Demler, E., Gerstein, G., Dalinger, A., Epishin, A., Heidenblut, T., Nürnberger, F. & Maier, H. J., 2018, In: Materials Research. 21, 6, e20180428.

    Research output: Contribution to journal › Article › Research › peer review

  85. Published

    Phase transformations in a boron-alloyed steel at high heating rates

    Hordych, I., Bild, K., Boiarkin, V., Rodman, D. & Nürnberger, F., 2018, In: Procedia Manufacturing. 15, p. 1062-1070 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  86. 2017

  87. Published

    Manufacturing of tailored tubes with a process integrated heat treatment

    Hordych, I., Boiarkin, V., Rodman, D. & Nürnberger, F., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. Brabazon, D., Ul Ahad, I. & Naher, S. (eds.). American Institute of Physics Inc., 190003. (AIP Conference Proceedings; vol. 1896).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  88. Published

    Method for Semi-Automated Measurement and Statistical Evaluation of Iron Aluminum Intermetallic Compound Layer Thickness and Morphology

    Herbst, S., Dovletoglou, C. N. & Nürnberger, F., 1 Oct 2017, In: Metallography, Microstructure, and Analysis. 6, 5, p. 367-374 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  89. Published

    Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming

    Behrens, B. A., Nürnberger, F., Bonk, C., Hübner, S., Behrens, S. & Vogt, H., 27 Sept 2017, In: Journal of Physics: Conference Series. 896, 1, 012004.

    Research output: Contribution to journal › Conference article › Research › peer review

  90. Published

    Microstructural characterization and simulation of damage for geared sheet components

    Gerstein, G., Isik, K., Gutknecht, F., Sieczkarek, P., Ewert, J., Tekkaya, A. E., Clausmeyer, T. & Nürnberger, F., 27 Sept 2017, In: Journal of Physics: Conference Series. 896, 1, 012076.

    Research output: Contribution to journal › Conference article › Research › peer review

  91. Published

    1-Step “Quenching and Partitioning” of the Press-Hardening Steel 22MnB5

    Wolf, L. O., Nürnberger, F., Rodman, D. & Maier, H. J., 1 Jun 2017, In: Steel research international. 88, 6, e201600307.

    Research output: Contribution to journal › Article › Research › peer review

  92. Published

    Microstructure and mechanical properties of friction welded steel-aluminum hybrid components after T6 heat treatment

    Herbst, S., Aengeneyndt, H., Maier, H. J. & Nürnberger, F., 14 Apr 2017, In: Materials Science and Engineering A. 696, p. 33-41 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  93. Published

    Surface modification of an austenitic stainless steel wire by a multi-pulse treatment with a high-power electric current

    Nürnberger, F., Gerstein, G., Dalinger, A., Thürer, S. E., Vinogradov, A., Feldhoff, A. & Maier, H. J., 23 Mar 2017, In: Journal of materials science. 52, 13, p. 8007-8015 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  94. Published

    The Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of Ferritic–Martensitic Two-Phase Steels

    Wolf, L. O., Nürnberger, F., Rodman, D. & Maier, H. J., 1 Feb 2017, In: Steel research international. 88, 2, p. 271-280 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  95. Published

    Formation and growth of voids in dual-phase steel at microscale and nanoscale levels

    Gerstein, G., Besserer, H. B., Nürnberger, F., Barrales-Mora, L. A., Shvindlerman, L. S., Estrin, Y. & Maier, H. J., 3 Jan 2017, In: Journal of materials science. 52, 8, p. 4234-4243 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  96. Published

    Analysis of dislocation structures in ferritic and dual phase steels regarding continuous and discontinuous loading paths

    Gerstein, G., Clausmeyer, T., Gutknecht, F., Tekkaya, A. E. & Nürnberger, F., 1 Jan 2017, TMS 2017 146th Annual Meeting. Springer International Publishing AG, p. 203-210 8 p. (Minerals, Metals and Materials Series; vol. Part F6).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  97. Published

    Influence of sticking on the roll topography at twin-roll casting of aluminum alloys

    Grydin, O., Nürnberger, F. & Schaper, M., 1 Jan 2017, In: Minerals, Metals and Materials Series. 210819, p. 827-831 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  98. Published

    Heat treatment of steel-Aluminum hybrid components

    Herbst, S. & Nürnberger, F., 2017, Materials Science and Technology Conference and Exhibition 2017, MS and T 2017. p. 53-60 8 p. (Materials Science and Technology Conference and Exhibition 2017, MS and T 2017; vol. 1).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  99. Published

    Influence of high-current-density impulses on the plasticity of single crystal nickel-based super alloy CMSX-447-47

    Gerstein, G., Demler, E., Dalinger, A., Epishin, A., Nuernberger, F. & Maier, H., 2017, Plastic deformation of metals. Frolov, Y. V. (ed.). Dnipro

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  100. Published

    Intercritical annealing - new heat treatment strategies for tailoring the stress-strain behavior of 22mnb5

    Wolf, L. O., Rodman, D., Nürnberger, F., Cordebois, J. P. & Maier, H. J., 2017, 6th International Conference Hot Steel Metal Forming of High-Performance Steel, CHS2 2017- Proceedings. Oldenburg, M., Prakash, B. & Steinhoff, K. (eds.). p. 433-440 8 p. (6th International Conference Hot Steel Metal Forming of High-Performance Steel, CHS2 2017- Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  101. Published

    Investigation of the sign-variable low-cyclic bending deformation influence on sheet properties of materials with a hexagonal crystal lattice

    Gerstein, G., Rodman, D., Demler, E., Rodman, M., Gerstein, G., Briukhanov, A., Grydin, O., Klose, C. & Nuernberger, F., 2017, Plastic deformation of metals. Dnipro

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  102. Published

    Methodical procedure for investigating the influence of electric impulses on the deformation behavior of the single crystal nickel-based alloy CMSX-4 and dynamics of grain boundaries in aluminum bicrystals

    Gerstein, G., Demler, E., Dalinger, A., Nuernberger, F., Molodov, D. A. & Epishin, A., 2017, VII international conference „Deformation and destruction of materials and nanomaterials". Bannykh, O. A. (ed.).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  103. Published

    Vorhersage von Schädigung in der Blechmassivumformung

    Gerstein, G., Gutknecht, F., Isik, K., Clausmeyer, T., Tekkaya, A. E. & Nuernberger, F., 2017, p. 220-220.

    Research output: Contribution to conference › Poster › Research

  104. 2016

  105. Published

    Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based Alloy

    Demler, E., Gerstein, G., Dalinger, A., Epishin, A., Rodman, D. & Nürnberger, F., 8 Dec 2016, In: Journal of Materials Engineering and Performance. 26, 1, p. 177-184 8 p.

    Research output: Contribution to journal › Article › Research

  106. Published

    57Fe Mössbauer, SEM/EDX, p-XRF and μ-XRF studies on a Dutch painting

    Lehmann, R., Schmidt, H. J., Costa, B. F. O., Blumers, M., Sansano, A., Rull, F., Wengerowsky, D., Nürnberger, F., Maier, H. J., Klingelhöfer, G. & Renz, F., 1 Dec 2016, In: Hyperfine Interactions. 237, 1, p. 1-10 10 p., 69.

    Research output: Contribution to journal › Article › Research › peer review

  107. Published

    Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass Drawing

    Milenin, A., Kustra, P., Byrska-Wójcik, D., Grydin, O., Schaper, M., Mentlein, T., Gerstein, G. & Nürnberger, F., Dec 2016, In: JOM. 68, 12, p. 3063-3069 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  108. Published

    Determination of heat transfer coefficients for complex spray cooling arrangements

    Herbst, S., Steinke, K. F., Maier, H. J., Milenin, A. & Nürnberger, F., 22 Sept 2016, In: International Journal of Microstructure and Materials Properties. 11, 3-4, p. 229-246 18 p.

    Research output: Contribution to journal › Article › Research › peer review

  109. Published

    Verfahren zur Herstellung eines Hybridzahnrads, Strangpressprofilbauteil sowie Hybridzahnrad

    Maier, H. J. (Inventor), Nürnberger, F. (Inventor), Hassel, T. (Inventor) & Klose, C. (Inventor), 18 Aug 2016, IPC No. F16H 55/ 17 A I, Patent No. DE102015102297, Priority date 18 Feb 2015, Priority No. DE201510102297

    Research output: Patent

  110. Published

    Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron Microscopy

    Besserer, H. B., Boiarkin, V., Rodman, D. & Nürnberger, F., Aug 2016, In: Metallography, Microstructure, and Analysis. 5, 4, p. 332-341 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  111. Published

    Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching

    Isik, K., Gerstein, G., Gutknecht, F., Clausmeyer, T., Nürnberger, F., Maier, H. J. & Tekkaya, A. E., 21 Jul 2016, In: Procedia Structural Integrity. 2, p. 673-680 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  112. Published

    Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets

    Bryukhanov, A. A., Gerstein, G., Dyachok, D. A. & Nürnberger, F., 1 Jul 2016, In: Physics of Metals and Metallography. 117, 7, p. 719-724 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  113. Published

    Experimental analysis of anisotropic damage in dual-phase steel by resonance measurement

    Gerstein, G., Clausmeyer, T., Isik, K., Nürnberger, F., Tekkaya, A. E., Bruchanov, A. A. & Maier, H. J., 19 May 2016, In: International Journal of Damage Mechanics. 26, 8, p. 1147-1169 23 p.

    Research output: Contribution to journal › Article › Research › peer review

  114. Published

    Effect of Pre-Rolling Heat Treatments on the Bond Strength of Cladded Galvanized Steels in a Cold Roll Bonding Process

    Hordych, I., Rodman, D., Nürnberger, F., Hoppe, C., Schmidt, H. C., Grundmeier, G., Homberg, W. & Maier, H. J., 6 Apr 2016, In: Steel research international. 87, 12, p. 1619-1626 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  115. Published

    Evaluation of Void Nucleation and Development during Plastic Deformation of Dual-Phase Steel DP600

    Isik, K., Gerstein, G., Clausmeyer, T., Nürnberger, F., Tekkaya, A. E. & Maier, H. J., 4 Apr 2016, In: Steel research international. 87, 12, p. 1583-1591 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  116. Published

    Process Integrated Heat Treatment of a Microalloyed Medium Carbon Steel: Microstructure and Mechanical Properties

    Herbst, S., Schledorn, M., Maier, H. J., Milenin, A. & Nürnberger, F., Apr 2016, In: Journal of Materials Engineering and Performance. 25, 4, p. 1453-1462 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  117. Published

    Specimen Preparation by Ion Beam Slope Cutting for Characterization of Ductile Damage by Scanning Electron Microscopy

    Besserer, H. B., Gerstein, G., Maier, H. J. & Nürnberger, F., 23 Mar 2016, In: Microscopy research and technique. 79, 4, p. 321-327 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  118. Published

    Ductile Damage and Fatigue Behavior of Semi-Finished Tailored Blanks for Sheet-Bulk Metal Forming Processes

    Besserer, H. B., Hildenbrand, P., Gerstein, G., Rodman, D., Nürnberger, F., Merklein, M. & Maier, H. J., Mar 2016, In: Journal of Materials Engineering and Performance. 25, 3, p. 1136-1142 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  119. Published

    The effect of texture in modeling deformation processes of bcc steel sheets

    Gerstein, G., Bruchanov, A. A., Dyachok, D. V. & Nürnberger, F., 1 Feb 2016, In: Materials letters. 164, p. 356-359 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  120. Published

    Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming

    Isik, K., Gerstein, G., Schneider, T., Schulte, R., Rosenbusch, D., Clausmeyer, T., Nürnberger, F., Vucetic, M., Koch, S., Hübner, S., Behrens, B. A., Tekkaya, A. E. & Merklein, M., 14 Jan 2016, In: Production Engineering. 10, 1, p. 5-15 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  121. Published

    Induction Heat Treatment of Sheet-Bulk Metal-Formed Parts Assisted by Water–Air Spray Cooling

    Besserer, H. B., Dalinger, A., Rodman, D., Nürnberger, F., Hildenbrand, P., Merklein, M. & Maier, H. J., 7 Jan 2016, In: Steel research international. 87, 9, p. 1220-1227 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  122. Published

    Characterization of the interface of co-extruded asymmetric aluminum-titanium composite profiles

    Grittner, N., Engelhardt, M., Striewe, B., von Hehl, A., Klose, C. & Nürnberger, F., 1 Jan 2016, Advanced Composites for Aerospace, Marine, and Land Applications II. Springer International Publishing AG, p. 29-37 9 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  123. Published

    Introducing selective laser melting to manufacture machine elements

    Lachmayer, R., Zghair, Y. A., Klose, C. & Nürnberger, F., 1 Jan 2016, In: Proceedings of International Design Conference, DESIGN. DS 84, p. 831-841 11 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  124. Published

    Comparsion of the mechanisms of void formation by plastic deformation in single- and dual-phase BCC-steels

    Gerstein, G., Besserer, H. B., Nürnberger, F. & Maier, H. J., 2016, Characterization of Minerals, Metals, and Materials 2015. Springer International Publishing AG, p. 75-81 7 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  125. Published

    Evolution of void shape anisotropy in deformed BCC steels

    Gerstein, G., Nürnberger, F. & Maier, H. J., 2016, EPD Congress 2016. Springer International Publishing AG, p. 173-179 7 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  126. Published

    Lonenstrahlbearbeitung zur Probenpräparation für die Untersuchung von duktiler Schädigung in Tiefziehstählen

    Besserer, H. B., Gerstein, G., Dalinger, A., Jablonik, L., Rodman, D. & Nürnberger, F., 2016, In: Praktische Metallographie/Practical Metallography. 53, 4, p. 221-236 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  127. 2015

  128. Published

    Holistic consideration of grain growth behavior of tempering steel 34CrNiMo6 during heating processes

    Herbst, S., Besserer, H. B., Grydin, O., Milenin, A., Maier, H. J. & Nürnberger, F., 9 Sept 2015, In: Journal of Materials Processing Technology. 229, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  129. Published

    Editorial

    Nürnberger, F., 1 Jun 2015, In: Forschung im Ingenieurwesen/Engineering Research. 79, 1-2, p. 3 1 p.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  130. Published

    Strangpressen von bimetallischen Aluminium-Magnesium-Rundprofilen und -Rohren

    Golovko, O., Bieliaiev, S. M., Nürnberger, F. & Danchenko, V. M., 1 Jun 2015, In: Forschung im Ingenieurwesen/Engineering Research. 79, 1-2, p. 17-27 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  131. Published

    Heat treatment of titanium-aluminum-compounds made by co-extrusion of asymmetric compound profiles

    Striewe, B., Grittner, N., Von Hehl, A. & Nürnberger, F., 1 Jan 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). p. 206-211 6 p. (Materials Science Forum; vol. 828-829).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  132. Published

    Testing of pipe sections

    Andreiev, A., Golovko, O., Frolov, I., Nürnberger, F., Wolf, L. O., Schaper, M. & Grydin, O., 1 Jan 2015, In: Materialpruefung/Materials Testing. 57, 7, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  133. 2014

  134. Published

    Structural evolution of thin lamellar cementite during cold drawing of eutectoid steels

    Gerstein, G., Dudzinski, W., Grygier, D., Schaper, M., Milenin, A. & Nuernberger, F., 15 Dec 2014, In: Procedia Engineering. 81, p. 694-699 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  135. Published

    Characterization of the interface of co-extruded asymmetric aluminum-titanium composite profiles

    Grittner, N., Striewe, B., Von Hehl, A., Engelhardt, M., Klose, C. & Nürnberger, F., 1 Dec 2014, In: Materialwissenschaft und Werkstofftechnik. 45, 12, p. 1054-1060 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  136. Published

    Abkühlen stranggepresster Platten aus der Aluminiumlegierung EN AW-6082 mittels Spraykühlung – örtliche Wärmeübergangskoeffizienten

    Golovko, O., Frolov, I., Rodman, D., Nürnberger, F., Grydin, O. & Schaper, M., Dec 2014, In: Forschung im Ingenieurwesen/Engineering Research. 78, 3-4, p. 131-137 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  137. Published

    Modeling of spray cooling during induction hardening of spur gearwheels made from 42CrMo4 hardening and tempering steel

    Rodman, D., Boiarkin, V., Nürnberger, F., Dalinger, A. & Schaper, M., May 2014, In: Steel research international. 85, 5, p. 741-755 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  138. Published

    Joining with electrochemical support (ECUF): Cold pressure welding of copper

    Ebbert, C., Schmidt, H. C., Rodman, D., Nürnberger, F., Homberg, W., Maier, H. J. & Grundmeier, G., 24 Apr 2014, In: Journal of Materials Processing Technology. 214, 10, p. 2179-2187 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  139. Published

    Influence of the twin-roll casting parameters on the microsegregation in thin strips of the aluminium alloy EN AW-6082

    Grydin, O., Stolbchenko, M., Nürnberger, F. & Schaper, M., 10 Mar 2014, Light Metals 2014 - At the TMS 2014 Annual Meeting and Exhibition. Wiley-Blackwell, Vol. 9781118889084. p. 411-414 4 p. (TMS Light Metals).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  140. Published

    Influence of hot deformation on mechanical properties and microstructure of a twin-roll cast aluminium alloy en AW-6082

    Grydin, O., Stolbchenko, M., Nürnberger, F. & Schaper, M., 1 Mar 2014, In: Journal of Materials Engineering and Performance. 23, 3, p. 937-943 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  141. Published

    Tempering induction hardened 42CrMo4 steel helical gearwheels from residual heat using spray cooling

    Rodman, D., Nürnberger, F., Dalinger, A., Schaper, M., Krause, C., Kästner, M. & Reithmeier, E., 1 Mar 2014, In: Steel research international. 85, 3, p. 415-425 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  142. Published

    Suitable impact parameters for high-speed joining and influence on the bonding zone microstructure

    Herbst, S., Gerstein, G., Nürnberger, F. & Bach, F. W., Mar 2014, In: Journal of Materials Engineering and Performance. 23, 3, p. 944-953 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  143. Published

    Formation and Properties of Mixed Ferritic–Martensitic Microstructures in the Air‐Hardening Steel LH800

    Grydin, O., Nuernberger, F., Zou, Y., Schaper, M. & Brosius, A., 27 Feb 2014, In: Steel research international. 85, 9, p. 1340-1347 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  144. Published

    Heat treatment of aluminum-titanium-compounds made by co-extrusion and friction welding

    Striewe, B., von Hehl, A., Grittner, N., Schaper, M. & Nürnberger, F., 1 Jan 2014, Aluminium Alloys, ICAA 2014. Marthinsen, K., Holmedal, B. & Li, Y. (eds.). p. 839-844 6 p. (Materials Science Forum; vol. 794-796).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  145. Published

    Sandwich rolling of twin-roll cast aluminium-steel clad strips

    Stolbchenko, M., Grydin, O., Nürnberger, F., Samsonenko, A. & Schaper, M., 1 Jan 2014, In: Procedia Engineering. 81, p. 1541-1546 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  146. Published

    Spray cooling of early extracted hot stamped parts

    Nürnberger, F., Diekamp, M., Moritz, J., Wolf, L., Hübner, S. & Behrens, B. A., 1 Jan 2014, TMS 2014 - 143rd Annual Meeting and Exhibition, Supplemental Proceedings. Minerals, Metals and Materials Society, p. 983-990 8 p. (TMS Annual Meeting).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  147. 2013

  148. Published

    Twin-roll casting of aluminum-steel clad strips

    Grydin, O., Gerstein, G., Nürnberger, F., Schaper, M. & Danchenko, V., 1 Oct 2013, In: Journal of manufacturing processes. 15, 4, p. 501-507 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  149. Published

    Water-air spray cooling of extruded profiles: Process integrated heat treatment of the alloy EN AW-6082

    Nowak, M., Golovko, O., Nürnberger, F., Frolov, I. & Schaper, M., 6 May 2013, In: Journal of Materials Engineering and Performance. 22, 9, p. 2580-2587 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  150. Published

    Microstructure evolution of the air-hardening steel LH800® due to heat treatment

    Schaper, M., Grydin, O. & Nürnberger, F., 2013, In: HTM - Journal of Heat Treatment and Materials. 68, 1, p. 42-48 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  151. Published

    Topographieoptimierende Präparation metallischer Werkstoffverbunde

    Herbst, S., Jablonik, L., Gerstein, G., Nürnberger, F. & Bach, F. W., 2013, In: Praktische Metallographie/Practical Metallography. 50, 7, p. 491-500 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  152. 2012

  153. Published

    Numerische Berechnung einer integrierten Wärmebehandlung für präzisionsgeschmiedete Bauteile

    Behrens, B. A., Bach, F. W., Bouguecha, A., Nürnberger, F., Schaper, M., Yu, Z. & Klassen, A., 1 Dec 2012, In: HTM - Journal of Heat Treatment and Materials. 67, 5, p. 337-343 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  154. Published

    Distortion analysis of air hardened deep drawn parts of the air-hardened steel LH800

    Grydin, O., Nürnberger, F., Schaper, M., Cwiekala, T., Brosius, A., Tekkaya, A. E., Barthel, C. & Svendsen, B., 2012, Quenching Control and Distortion - Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference. p. 829-838 10 p. (Quenching Control and Distortion - Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  155. Published

    Investigation of the surface residual stresses in spray cooled induction hardened gearwheels

    Rodman, D., Krause, C., Nürnberger, F., Bach, F. W., Gerdes, L. & Breidenstein, B., 2012, In: International Journal of Materials Research. 103, 1, p. 73-79 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  156. External

    Investigation of the Water-Air Cooling Process of the Thick-Walled Extruded Profile Made of Alloy En Aw-6060 on the Output Table

    Golovko, A. N., Rodman, D., Nürnberger, F., Schaper, M., Frolov, Y. V. & Beliaiev, S. M., 2012, In: Metallurgical and Mining Industry. 4, 2, p. 66-74 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  157. Published

    Modeling the relationship between hardness and spray cooling parameters for pinion shafts using a neuro-fuzzy model strategy

    Yu, Z., Kuznietsov, K., Mozgova, I., Böhm, V., Gretzki, T., Nürnberger, F., Schaper, M. & Reimche, W., 2012, HTM - Haerterei-Technische Mitteilungen, 67, 1, p. 39-47 9 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  158. Published

    Numerical investigation of in situ TEM tensile tests

    Nürnberger, F., Stolbchenko, M., Grydin, O., Gerstein, G., Faßmann, D. & Schaper, M., 2012, In: Metallurgical and Mining Industry. 4, 4, p. 33-40 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  159. Published

    Präparationsroutine zur in-situ Dehnuntersuchung des Tiefziehstahls DC04 mittels Transmissionselektronenmikroskopie

    Faßmann, D., Gerstein, G., Gerstein, D., Nürnberger, F., Schaper, M. & Bach, F. W., 2012, In: Praktische Metallographie/Practical Metallography. 49, 9, p. 577-587 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  160. 2011

  161. Published

    Optimised press-hardening process using spray cooling: process integrated heat treatment of 22MnB5 sheet metal

    Diekamp, M., Hübner, S., Nürnberger, F., Schaper, M., Behrens, B. A. & Bach, F. W., 1 Dec 2011, HTM - Haerterei-Technische Mitteilungen, 66, 6, p. 316-322 7 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  162. Published

    A study of structure evolution in pearlitic steel wire at increasing plastic deformation

    Gershteyn, G., Nürnberger, F., Cianciosi, F., Shevchenko, N., Schaper, M. & Bach, F. W., Dec 2011, In: Steel research international. 82, 12, p. 1368-1374 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  163. Published

    Induction hardening of spur gearwheels made from 42CrMo4 hardening and tempering steel by employing spray cooling

    Rodman, D., Krause, C., Nürnberger, F., Bach, F. W., Haskamp, K., Kästner, M. & Reithmeier, E., 1 Apr 2011, In: Steel research international. 82, 4, p. 329-336 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  164. Published

    Orts- und temperaturabhängige Wärmeübergangskoeffizienten bei der Sprühkühlung von AlSi10Mg-Gussplatten

    Rodman, D., Kerber, K., Yu, Z., Mozgova, I., Nürnberger, F. & Bach, F. W., 1 Apr 2011, In: Forschung im Ingenieurwesen/Engineering Research. 75, 1, p. 25-34 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  165. Published

    Microstructural behaviour of tempering steels during precision forging and quenching from hot-forming temperatures

    Nürnberger, F., Grydin, O., Yu, Z. & Schaper, M., 2011, In: Metallurgical and Mining Industry. 3, 7, p. 79-86 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  166. 2010

  167. Published

    Computation of isothermal transformation diagrams of 42CrMo4 steel from dilatometer measurements with continuous cooling

    Bach, F. W., Schaper, M., Yu, Z., Nürnberger, F., Gretzki, T., Rodman, D. & Springer, R., 1 Dec 2010, In: International Heat Treatment and Surface Engineering. 4, 4, p. 171-175 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  168. Published

    Microstructure transformations in tempering steels during continuous cooling from hot forging temperatures

    Nürnberger, F., Grydin, O., Schaper, M., Bach, F. W., Koczurkiewicz, B. & Milenin, A., 1 Mar 2010, In: Steel research international. 81, 3, p. 224-233 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  169. Published

    Simulation of gas and spray quenching during extrusion of aluminium alloys

    Reich, M., Schöne, S., Keßler, O., Nowak, M., Grydin, O., Nürnberger, F. & Schaper, M., 2010, Advances on Hot Extrusion and Simulation of Light Alloys. p. 57-64 8 p. (Key Engineering Materials; vol. 424).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  170. 2009

  171. Published

    Isothermal microstructural transformations of the heat-treatable steel 42CrMo4 during heat-treatment following hot-forming

    Nürnberger, F., Grydin, O., Schaper, M., Bach, F. W., Evertz, T. & Kluge, U., 1 Dec 2009, In: Steel research international. 80, 12, p. 892-898 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  172. Published

    Simulation of integrated heat-treatment of precision forged components

    Nürnberger, F., Grydin, O., Yu, Z., Schaper, M. & Bach, F. W., 1 Dec 2009, In: Steel research international. 80, 12, p. 899-905 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  173. Published

    Simulation of microstructure and residual stress development in cylinders of AISI 4140 during quenching by spray cooling and following tempering

    Yu, Z., Nürnberger, F., Gretzki, T., Schaper, M. & Bach, F. W., 1 Dec 2009, Materials Science and Technology Conference and Exhibition 2009, MS and T'09. p. 2422-2433 12 p. (Materials Science and Technology Conference and Exhibition 2009, MS and T'09; vol. 4).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  174. Published

    Prediction of continuous cooling diagrams for the precision forged tempering steel 50CrMo4 by means of artificial neural networks

    Nürnberger, F., Schaper, M., Bach, F. W., Mozgova, I., Kuznetsov, K., Halikova, A. & Perederieieva, O., 2009, In: Advances in Materials Science and Engineering. 2009, 582739.

    Research output: Contribution to journal › Article › Research › peer review

  175. 2008

  176. Published

    Wärmeübergangs- und Tropfencharakteristik für eine Spraykühlung im Temperaturbereich von 900-100°C

    Krause, C., Wulf, E., Nürnberger, F. & Bach, F. W., Sept 2008, In: Forschung im Ingenieurwesen/Engineering Research. 72, 3, p. 163-173 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  177. 2006

  178. Published

    Determination of heat transfer coefficents during spray cooling by measuring spray characteristics

    Krause, C., Gretzki, T., Nürnberger, F., Schaper, M. & Bach, F. W., 1 Dec 2006, In: Forschung im Ingenieurwesen/Engineering Research. 70, 4, p. 237-242 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  179. Published

    Bestimmung der Streckgrenze und der Hall-Petch-konstanten des vergütungsstahles 42CrMo4 unterschiedlichen gefüges mittels eindruckprüfungen

    Bach, F. W., Schaper, M., Nürnberger, F., Krause, C. & Grydin, O., Aug 2006, In: Materialwissenschaft und Werkstofftechnik. 37, 8, p. 668-673 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  180. Published

    Simulation des abschreckhärtens mittels sprühkühlung - Wärmeübergang, gefüge und härte

    Bach, F. W., Schaper, M., Nürnberger, F., Krause, C. & Broer, C., 2006, HTM - Haerterei-Technische Mitteilungen, 61, 3, p. 142-147 6 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  181. 2005

  182. Published

    Statistische Beschreibung der Tropfengrößenverteilung bei stationären Zerstäubungsprozessen

    Bach, F. W., Nürnberger, F., Philipp, K. & Schaper, M., Jun 2005, In: Forschung im Ingenieurwesen/Engineering Research. 69, 3, p. 181-186 6 p.

    Research output: Contribution to journal › Article › Research › peer review