Details
| Original language | English |
|---|---|
| Article number | 2201740 |
| Journal | Advanced engineering materials |
| Volume | 25 |
| Issue number | 13 |
| Early online date | 19 Apr 2023 |
| Publication status | Published - 4 Jul 2023 |
Abstract
This study investigates the wear behavior of additively welded cladding layers on less wear-resistant base materials using plasma-transferred arc welding and laser hot-wire cladding. The cladding layers are made from atomized AISI 52100, AISI 5140, and a stainless steel with (0.52 wt% C, 0.9 wt% Si, 14 wt% Cr, 0.4 wt% Mo, 1.8 wt% Ni, 1.2 wt% V, bal. Fe) on unalloyed steel AISI 1022M as the base material. The specimens' microstructure and surface hardness are comparable with conventional specimens of monolithic AISI 52100 and AISI 4140, which is used as a reference. Tribometer tests are carried out in ball-on-disk configuration to investigate the wear resistance of the specimen. The multimaterial specimens show comparable wear behavior to their monolithic counterparts, and a good performance of the stainless specimen in pure sliding is proven. These findings suggest that additive manufacturing processes can be used to clad less wear-resistant base materials and achieve high wear resistance, making it possible to exploit the advantages of surface coatings under severe wear conditions.
Keywords
- additive manufacturing, hybrid bearing, Rockit, stainless bearing, tailored forming, wear testing
ASJC Scopus subject areas
- Materials Science(all)
- General Materials Science
- Physics and Astronomy(all)
- Condensed Matter Physics
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Advanced engineering materials, Vol. 25, No. 13, 2201740, 04.07.2023.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Wear of Tailored Forming Steels
AU - Coors, Timm
AU - Faqiri, Yusuf
AU - Saure, Felix
AU - Pape, Florian
AU - Hassel, Thomas
AU - Poll, Gerhard
N1 - Funding Information: The results presented in this article were obtained within the Collaborative Research Centre 1153 “Process chain to produce hybrid high‐performance components by tailored forming” in the subprojects A4, C3, and T1. The authors thank the German Research Foundation (DFG) for their financial support of this project under grant no. 252662854.
PY - 2023/7/4
Y1 - 2023/7/4
N2 - This study investigates the wear behavior of additively welded cladding layers on less wear-resistant base materials using plasma-transferred arc welding and laser hot-wire cladding. The cladding layers are made from atomized AISI 52100, AISI 5140, and a stainless steel with (0.52 wt% C, 0.9 wt% Si, 14 wt% Cr, 0.4 wt% Mo, 1.8 wt% Ni, 1.2 wt% V, bal. Fe) on unalloyed steel AISI 1022M as the base material. The specimens' microstructure and surface hardness are comparable with conventional specimens of monolithic AISI 52100 and AISI 4140, which is used as a reference. Tribometer tests are carried out in ball-on-disk configuration to investigate the wear resistance of the specimen. The multimaterial specimens show comparable wear behavior to their monolithic counterparts, and a good performance of the stainless specimen in pure sliding is proven. These findings suggest that additive manufacturing processes can be used to clad less wear-resistant base materials and achieve high wear resistance, making it possible to exploit the advantages of surface coatings under severe wear conditions.
AB - This study investigates the wear behavior of additively welded cladding layers on less wear-resistant base materials using plasma-transferred arc welding and laser hot-wire cladding. The cladding layers are made from atomized AISI 52100, AISI 5140, and a stainless steel with (0.52 wt% C, 0.9 wt% Si, 14 wt% Cr, 0.4 wt% Mo, 1.8 wt% Ni, 1.2 wt% V, bal. Fe) on unalloyed steel AISI 1022M as the base material. The specimens' microstructure and surface hardness are comparable with conventional specimens of monolithic AISI 52100 and AISI 4140, which is used as a reference. Tribometer tests are carried out in ball-on-disk configuration to investigate the wear resistance of the specimen. The multimaterial specimens show comparable wear behavior to their monolithic counterparts, and a good performance of the stainless specimen in pure sliding is proven. These findings suggest that additive manufacturing processes can be used to clad less wear-resistant base materials and achieve high wear resistance, making it possible to exploit the advantages of surface coatings under severe wear conditions.
KW - additive manufacturing
KW - hybrid bearing
KW - Rockit
KW - stainless bearing
KW - tailored forming
KW - wear testing
UR - http://www.scopus.com/inward/record.url?scp=85154557005&partnerID=8YFLogxK
U2 - 10.1002/adem.202201740
DO - 10.1002/adem.202201740
M3 - Article
AN - SCOPUS:85154557005
VL - 25
JO - Advanced engineering materials
JF - Advanced engineering materials
SN - 1438-1656
IS - 13
M1 - 2201740
ER -