Details
Translated title of the contribution | Visualisation of chip formation during sawing with ICS – Chip formation in the closed cutting gap when sawing with internal cooling lubricant supply |
---|---|
Original language | German |
Pages (from-to) | 50-54 |
Number of pages | 5 |
Journal | WT Werkstattstechnik |
Volume | 112 |
Issue number | 1-2 |
Publication status | Published - 2022 |
Abstract
In sawing, only a small amount of coolant reaches the spaces between the chip, tool and workpiece, depending on the shading of the cutting zone by the workpiece, tool or chips. An internal coolant supply (ICS) can enable a reliable coolant supply. For the first time, this paper shows how the chip formation process is made visible in interaction with a fluid in the narrow closed cutting gap during sawing. This enables the experimental investigation of thermal and mechanical fluid-solid interactions in the sawing process.
ASJC Scopus subject areas
- Engineering(all)
- Control and Systems Engineering
- Engineering(all)
- Automotive Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: WT Werkstattstechnik, Vol. 112, No. 1-2, 2022, p. 50-54.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Visualisierung der Spanbildung beim Sägen mit IKZ/Visualisation of chip formation during sawing with ICS – Chip formation in the closed cutting gap when sawing with internal cooling lubricant supply
AU - Menze, C.
AU - Gutsche, D.
AU - Eisseler, R.
AU - Stehle, T.
AU - Möhring, H. C.
AU - Stegmann, J.
AU - Kabelac, S.
PY - 2022
Y1 - 2022
N2 - In sawing, only a small amount of coolant reaches the spaces between the chip, tool and workpiece, depending on the shading of the cutting zone by the workpiece, tool or chips. An internal coolant supply (ICS) can enable a reliable coolant supply. For the first time, this paper shows how the chip formation process is made visible in interaction with a fluid in the narrow closed cutting gap during sawing. This enables the experimental investigation of thermal and mechanical fluid-solid interactions in the sawing process.
AB - In sawing, only a small amount of coolant reaches the spaces between the chip, tool and workpiece, depending on the shading of the cutting zone by the workpiece, tool or chips. An internal coolant supply (ICS) can enable a reliable coolant supply. For the first time, this paper shows how the chip formation process is made visible in interaction with a fluid in the narrow closed cutting gap during sawing. This enables the experimental investigation of thermal and mechanical fluid-solid interactions in the sawing process.
KW - Kühlschmierstoffe
KW - Produktionstechnik
KW - Sägen
UR - http://www.scopus.com/inward/record.url?scp=85128473735&partnerID=8YFLogxK
U2 - 10.37544/1436-4980-2022-01-02-54
DO - 10.37544/1436-4980-2022-01-02-54
M3 - Artikel
AN - SCOPUS:85128473735
VL - 112
SP - 50
EP - 54
JO - WT Werkstattstechnik
JF - WT Werkstattstechnik
IS - 1-2
ER -