Details
| Original language | English |
|---|---|
| Title of host publication | Proceedings of the 29th International Offshore and Polar Engineering Conference |
| Subtitle of host publication | ISOPE 2019 |
| Editors | Jin S. Chung, Odd M. Akselsen, HyunWoo Jin, Hiroyasu Kawai, Yongwon Lee, Dmitri Matskevitch, Suak Ho Van, Decheng Wan, Alan M. Wang, Satoru Yamaguchi |
| Publisher | International Society of Offshore and Polar Engineers |
| Pages | 3978-3985 |
| ISBN (print) | 978-1-880653-85-2 |
| Publication status | Published - 2019 |
| Event | 29th International Ocean and Polar Engineering Conference, ISOPE 2019 - Honolulu, United States Duration: 16 Jun 2019 → 21 Jun 2019 |
Publication series
| Name | Proceedings of the International Offshore and Polar Engineering Conference |
|---|---|
| ISSN (Print) | 1098-6189 |
| ISSN (electronic) | 1555-1792 |
Abstract
A new resonance-regulated testing device operating at a frequency of up to 200 Hz has been developed for very high cycle fatigue tests on large-scale cast iron and steel specimens. The device is able to perform tests on axially loaded plate specimens with a thickness of up to 20 mm and a width of up to 40 mm. It allows testing with a maximum amplitude of 70 kN and a stress ratio of 0.1 ≤ R ≤ 0.5. In this paper, the working principle of the device is shown. Furthermore, the calibration, pretension and testing procedures are presented based on the tests with ductile cast iron specimens (EN-GJS-18C-LT).
Keywords
- Butt joints, Cast iron, Fatigue testing device, Very high cycle fatigue
ASJC Scopus subject areas
- Energy(all)
- Energy Engineering and Power Technology
- Engineering(all)
- Ocean Engineering
- Engineering(all)
- Mechanical Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Proceedings of the 29th International Offshore and Polar Engineering Conference: ISOPE 2019. ed. / Jin S. Chung; Odd M. Akselsen; HyunWoo Jin; Hiroyasu Kawai; Yongwon Lee; Dmitri Matskevitch; Suak Ho Van; Decheng Wan; Alan M. Wang; Satoru Yamaguchi. International Society of Offshore and Polar Engineers, 2019. p. 3978-3985 (Proceedings of the International Offshore and Polar Engineering Conference).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - Very High Cycle Fatigue Tests with a Resonance-Regulated Device for Testing of Large-Scale Cast Iron and Steel Specimens
AU - Schaumann, Peter
AU - Radulovic, Luka
AU - Kulikowski, Jan
AU - Alt, Attila
N1 - Funding Information: The testing device was developed by Attila Alt. The development of the device as well as the presented studies have been carried out within the ForWind joint research project "ventus efficiens ? Joint research for the efficiency of wind energy converters within the energy supply system", financially supported by the Ministry for Science and Culture in Lower Saxony, Germany as well as within the research project ?HyConCast-Hybrid substructure of high strength concrete and ductile iron castings?, which is funded by the German Federal Ministry for Economic Affairs and Energy. The authors thank the Ministry for Science and Culture in Lower Saxony and the Federal Ministry for Economic Affairs and Energy for funding and all project partners for the cooperation.
PY - 2019
Y1 - 2019
N2 - A new resonance-regulated testing device operating at a frequency of up to 200 Hz has been developed for very high cycle fatigue tests on large-scale cast iron and steel specimens. The device is able to perform tests on axially loaded plate specimens with a thickness of up to 20 mm and a width of up to 40 mm. It allows testing with a maximum amplitude of 70 kN and a stress ratio of 0.1 ≤ R ≤ 0.5. In this paper, the working principle of the device is shown. Furthermore, the calibration, pretension and testing procedures are presented based on the tests with ductile cast iron specimens (EN-GJS-18C-LT).
AB - A new resonance-regulated testing device operating at a frequency of up to 200 Hz has been developed for very high cycle fatigue tests on large-scale cast iron and steel specimens. The device is able to perform tests on axially loaded plate specimens with a thickness of up to 20 mm and a width of up to 40 mm. It allows testing with a maximum amplitude of 70 kN and a stress ratio of 0.1 ≤ R ≤ 0.5. In this paper, the working principle of the device is shown. Furthermore, the calibration, pretension and testing procedures are presented based on the tests with ductile cast iron specimens (EN-GJS-18C-LT).
KW - Butt joints
KW - Cast iron
KW - Fatigue testing device
KW - Very high cycle fatigue
UR - http://www.scopus.com/inward/record.url?scp=85079764122&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:85079764122
SN - 978-1-880653-85-2
T3 - Proceedings of the International Offshore and Polar Engineering Conference
SP - 3978
EP - 3985
BT - Proceedings of the 29th International Offshore and Polar Engineering Conference
A2 - Chung, Jin S.
A2 - Akselsen, Odd M.
A2 - Jin, HyunWoo
A2 - Kawai, Hiroyasu
A2 - Lee, Yongwon
A2 - Matskevitch, Dmitri
A2 - Ho Van, Suak
A2 - Wan, Decheng
A2 - Wang, Alan M.
A2 - Yamaguchi, Satoru
PB - International Society of Offshore and Polar Engineers
T2 - 29th International Ocean and Polar Engineering Conference, ISOPE 2019
Y2 - 16 June 2019 through 21 June 2019
ER -