Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen

Research output: Contribution to journalArticleResearchpeer review

Authors

  • B. A. Behrens
  • A. Bouguecha
  • T. Huinink
  • I. Peshekhodov
  • T. Matthias
  • J. Moritz
  • J. Schrödter
View graph of relations

Details

Translated title of the contributionInvestigation of the flow behavior of wrought magnesium alloy AZ31using layer compression and tensile tests
Original languageGerman
Pages (from-to)760-767
Number of pages8
JournalMaterialwissenschaft und Werkstofftechnik
Volume44
Issue number9
Publication statusPublished - 14 Sept 2013

Abstract

Today design of metal forming processes is often supported by numerical simulation. To obtain realistic simulation results, the used material models need accurate material parameters from the material characterization. Magnesium alloys in particular are not yet sufficiently investigated. Therefore, their material parameters are scarce in literature. Especially determination of flow curves at higher degrees of deformation represents a challenge, but is necessary in order to describe the characteristic hardening and softening, as they occur in magnesium materials at elevated temperature of forming process. In this paper, an approach for the determination of a combined hardening curve from a tensile test and a layer compression test is presented. For this purpose, the corresponding values are recorded experimentally and evaluated based on the principle of the plastic work equivalence.

ASJC Scopus subject areas

Cite this

Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen. / Behrens, B. A.; Bouguecha, A.; Huinink, T. et al.
In: Materialwissenschaft und Werkstofftechnik, Vol. 44, No. 9, 14.09.2013, p. 760-767.

Research output: Contribution to journalArticleResearchpeer review

Behrens, BA, Bouguecha, A, Huinink, T, Peshekhodov, I, Matthias, T, Moritz, J & Schrödter, J 2013, 'Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen', Materialwissenschaft und Werkstofftechnik, vol. 44, no. 9, pp. 760-767. https://doi.org/10.1002/mawe.201300120
Behrens, B. A., Bouguecha, A., Huinink, T., Peshekhodov, I., Matthias, T., Moritz, J., & Schrödter, J. (2013). Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen. Materialwissenschaft und Werkstofftechnik, 44(9), 760-767. https://doi.org/10.1002/mawe.201300120
Behrens BA, Bouguecha A, Huinink T, Peshekhodov I, Matthias T, Moritz J et al. Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen. Materialwissenschaft und Werkstofftechnik. 2013 Sept 14;44(9):760-767. doi: 10.1002/mawe.201300120
Download
@article{9edcb70f2f6042d495d9585e4ff1b506,
title = "Untersuchung des Flie{\ss}verhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen",
abstract = "Today design of metal forming processes is often supported by numerical simulation. To obtain realistic simulation results, the used material models need accurate material parameters from the material characterization. Magnesium alloys in particular are not yet sufficiently investigated. Therefore, their material parameters are scarce in literature. Especially determination of flow curves at higher degrees of deformation represents a challenge, but is necessary in order to describe the characteristic hardening and softening, as they occur in magnesium materials at elevated temperature of forming process. In this paper, an approach for the determination of a combined hardening curve from a tensile test and a layer compression test is presented. For this purpose, the corresponding values are recorded experimentally and evaluated based on the principle of the plastic work equivalence.",
keywords = "Deep drawing, Magnesium, Material characteristic",
author = "Behrens, {B. A.} and A. Bouguecha and T. Huinink and I. Peshekhodov and T. Matthias and J. Moritz and J. Schr{\"o}dter",
year = "2013",
month = sep,
day = "14",
doi = "10.1002/mawe.201300120",
language = "Deutsch",
volume = "44",
pages = "760--767",
journal = "Materialwissenschaft und Werkstofftechnik",
issn = "0933-5137",
publisher = "Wiley-VCH Verlag",
number = "9",

}

Download

TY - JOUR

T1 - Untersuchung des Fließverhaltens der Magnesiumknetlegierung AZ31 mit Hilfe von Schichtstauch- und Zugversuchen

AU - Behrens, B. A.

AU - Bouguecha, A.

AU - Huinink, T.

AU - Peshekhodov, I.

AU - Matthias, T.

AU - Moritz, J.

AU - Schrödter, J.

PY - 2013/9/14

Y1 - 2013/9/14

N2 - Today design of metal forming processes is often supported by numerical simulation. To obtain realistic simulation results, the used material models need accurate material parameters from the material characterization. Magnesium alloys in particular are not yet sufficiently investigated. Therefore, their material parameters are scarce in literature. Especially determination of flow curves at higher degrees of deformation represents a challenge, but is necessary in order to describe the characteristic hardening and softening, as they occur in magnesium materials at elevated temperature of forming process. In this paper, an approach for the determination of a combined hardening curve from a tensile test and a layer compression test is presented. For this purpose, the corresponding values are recorded experimentally and evaluated based on the principle of the plastic work equivalence.

AB - Today design of metal forming processes is often supported by numerical simulation. To obtain realistic simulation results, the used material models need accurate material parameters from the material characterization. Magnesium alloys in particular are not yet sufficiently investigated. Therefore, their material parameters are scarce in literature. Especially determination of flow curves at higher degrees of deformation represents a challenge, but is necessary in order to describe the characteristic hardening and softening, as they occur in magnesium materials at elevated temperature of forming process. In this paper, an approach for the determination of a combined hardening curve from a tensile test and a layer compression test is presented. For this purpose, the corresponding values are recorded experimentally and evaluated based on the principle of the plastic work equivalence.

KW - Deep drawing

KW - Magnesium

KW - Material characteristic

UR - http://www.scopus.com/inward/record.url?scp=84884970908&partnerID=8YFLogxK

U2 - 10.1002/mawe.201300120

DO - 10.1002/mawe.201300120

M3 - Artikel

AN - SCOPUS:84884970908

VL - 44

SP - 760

EP - 767

JO - Materialwissenschaft und Werkstofftechnik

JF - Materialwissenschaft und Werkstofftechnik

SN - 0933-5137

IS - 9

ER -