Details
| Original language | English |
|---|---|
| Pages (from-to) | 501-507 |
| Number of pages | 7 |
| Journal | Journal of manufacturing processes |
| Volume | 15 |
| Issue number | 4 |
| Publication status | Published - 1 Oct 2013 |
Abstract
The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
Keywords
- Aluminum, Clad interface, Clad strip, Steel, Twin-roll casting
ASJC Scopus subject areas
- Business, Management and Accounting(all)
- Strategy and Management
- Decision Sciences(all)
- Management Science and Operations Research
- Engineering(all)
- Industrial and Manufacturing Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Journal of manufacturing processes, Vol. 15, No. 4, 01.10.2013, p. 501-507.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Twin-roll casting of aluminum-steel clad strips
AU - Grydin, Olexandr
AU - Gerstein, Gregory
AU - Nürnberger, Florian
AU - Schaper, Mirko
AU - Danchenko, Valentyn
PY - 2013/10/1
Y1 - 2013/10/1
N2 - The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
AB - The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
KW - Aluminum
KW - Clad interface
KW - Clad strip
KW - Steel
KW - Twin-roll casting
UR - http://www.scopus.com/inward/record.url?scp=84888003009&partnerID=8YFLogxK
U2 - 10.1016/j.jmapro.2013.08.008
DO - 10.1016/j.jmapro.2013.08.008
M3 - Article
AN - SCOPUS:84888003009
VL - 15
SP - 501
EP - 507
JO - Journal of manufacturing processes
JF - Journal of manufacturing processes
SN - 1526-6125
IS - 4
ER -