Details
Original language | English |
---|---|
Pages (from-to) | 310-322 |
Number of pages | 13 |
Journal | Chemical Geology |
Volume | 411 |
Early online date | 15 Jul 2015 |
Publication status | Published - 4 Sept 2015 |
Abstract
The decompression rates (r) and the amount and types of volatile species (H2O+Cl±CO2±S) are crucial parameters for the physical behavior of ascending magmas because they affect the formation of crystals and bubbles, as well as bulk viscosities of volcanic suspensions and their eruptive styles (e.g., effusive vs. hazardous explosive eruptions). However, the roles of CO2, S and Cl, in addition to H2O, on decompression induced crystallization (DIC) are still poorly understood. In this study, we investigated the DIC of a trachybasaltic magma, as a function of volatile content (H2O≈5wt.%; Cl≈0.7wt.%; ±CO2≈2000ppm; ±S≈3000ppm) and r. Isothermal decompression experiments were conducted at T=1030°C and log(fO2)≈QFM+2 (QFM: quartz-fayalite-magnetite buffer) by releasing pressure (P) continuously from 300 to 70MPa at r=0.01, 0.1 and 1MPa/s. The phase assemblages at 300MPa, before the onset of decompression were composed of 91 to 99area% melt/glass, 2 to 9area% clinopyroxene, ≪1 area% spinel and ≪1 area% bubbles; with higher cpx proportions in the CO2-bearing samples (i.e., at lower water activity). We compare our experimental results with numerical models of equilibrium degassing (using SolEx and DCompress), phase assemblages (using MELTS) and with literature data on phase stabilities in S-bearing and S-free systems. These comparisons reveal that near-equilibrium conditions are reached in all three investigated systems if decompressed at the lowest rate of 0.01. MPa/s before quenching. The crystallization of clinopyroxene during decompression at 0.1 and 0.01. MPa/s is strongly enhanced by the presence of S, whereas spinel shows less significant variations. Plagioclase, biotite and olivine only occur in the S-bearing samples decompressed at a r of 0.01. MPa/s. At r = 0.01. MPa/s (near-equilibrium) a crystallinity of ~ 60 area% was reached in the S-bearing system, while the S-free systems are characterized by a ~ 20 area% crystallinity. The strong influence of S on the crystallinity is mainly explained by an increasing thermal stability of clinopyroxene during decompression to 70. MPa, which is probably due to the lower water activity in the presence of S at P≤. 70. MPa and the increase of the liquidus T with decreasing water content in the melt (i.e., with decreasing P at volatile saturated conditions).Even though the viscosity of the S-bearing melt is relatively low during decompression, the increasing modal abundance of clinopyroxene (and other phases) can lead to a strong increase of the effective magma viscosity and, thus, can slow down magma ascent within the conduit and limit the escape of bubbles. Subsequently, the magma may either i) solidify at shallow depths or ii) new magma inputs and/or a P increase in the conduit owing to second boiling can induce an explosive eruption. Hence, the obtained experimental results indicate that S-bearing basaltic arc magmas have a higher chance to erupt explosively than S-poor basalts, especially if the ascent rate is relatively low.
Keywords
- Arc basalt, Clinopyroxene, CO, Decompression induced crystallization, Sulfur, Water
ASJC Scopus subject areas
- Earth and Planetary Sciences(all)
- Geology
- Earth and Planetary Sciences(all)
- Geochemistry and Petrology
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Chemical Geology, Vol. 411, 04.09.2015, p. 310-322.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - The roles of decompression rate and volatiles (H2O+Cl±CO2±S) on crystallization in (trachy-) basaltic magma
AU - Fiege, Adrian
AU - Vetere, Francesco
AU - Iezzi, Gianluca
AU - Simon, Adam
AU - Holtz, François
N1 - Funding Information: This project was supported by Marie-Curie Actions (Intra-European Fellowship 267880 to F. Vetere). F. Vetere would like to acknowledge the ERC-2013-CoG Proposal No. 612776 — CHRONOS to Diego Perugini. We would like to thank J. Feige for sample preparation. We are grateful to M. Masotta for his valuable and constructive review that helped to improve the manuscript and to D.B. Dingwell for his editorial work. Publisher Copyright: © 2015 Elsevier B.V. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.
PY - 2015/9/4
Y1 - 2015/9/4
N2 - The decompression rates (r) and the amount and types of volatile species (H2O+Cl±CO2±S) are crucial parameters for the physical behavior of ascending magmas because they affect the formation of crystals and bubbles, as well as bulk viscosities of volcanic suspensions and their eruptive styles (e.g., effusive vs. hazardous explosive eruptions). However, the roles of CO2, S and Cl, in addition to H2O, on decompression induced crystallization (DIC) are still poorly understood. In this study, we investigated the DIC of a trachybasaltic magma, as a function of volatile content (H2O≈5wt.%; Cl≈0.7wt.%; ±CO2≈2000ppm; ±S≈3000ppm) and r. Isothermal decompression experiments were conducted at T=1030°C and log(fO2)≈QFM+2 (QFM: quartz-fayalite-magnetite buffer) by releasing pressure (P) continuously from 300 to 70MPa at r=0.01, 0.1 and 1MPa/s. The phase assemblages at 300MPa, before the onset of decompression were composed of 91 to 99area% melt/glass, 2 to 9area% clinopyroxene, ≪1 area% spinel and ≪1 area% bubbles; with higher cpx proportions in the CO2-bearing samples (i.e., at lower water activity). We compare our experimental results with numerical models of equilibrium degassing (using SolEx and DCompress), phase assemblages (using MELTS) and with literature data on phase stabilities in S-bearing and S-free systems. These comparisons reveal that near-equilibrium conditions are reached in all three investigated systems if decompressed at the lowest rate of 0.01. MPa/s before quenching. The crystallization of clinopyroxene during decompression at 0.1 and 0.01. MPa/s is strongly enhanced by the presence of S, whereas spinel shows less significant variations. Plagioclase, biotite and olivine only occur in the S-bearing samples decompressed at a r of 0.01. MPa/s. At r = 0.01. MPa/s (near-equilibrium) a crystallinity of ~ 60 area% was reached in the S-bearing system, while the S-free systems are characterized by a ~ 20 area% crystallinity. The strong influence of S on the crystallinity is mainly explained by an increasing thermal stability of clinopyroxene during decompression to 70. MPa, which is probably due to the lower water activity in the presence of S at P≤. 70. MPa and the increase of the liquidus T with decreasing water content in the melt (i.e., with decreasing P at volatile saturated conditions).Even though the viscosity of the S-bearing melt is relatively low during decompression, the increasing modal abundance of clinopyroxene (and other phases) can lead to a strong increase of the effective magma viscosity and, thus, can slow down magma ascent within the conduit and limit the escape of bubbles. Subsequently, the magma may either i) solidify at shallow depths or ii) new magma inputs and/or a P increase in the conduit owing to second boiling can induce an explosive eruption. Hence, the obtained experimental results indicate that S-bearing basaltic arc magmas have a higher chance to erupt explosively than S-poor basalts, especially if the ascent rate is relatively low.
AB - The decompression rates (r) and the amount and types of volatile species (H2O+Cl±CO2±S) are crucial parameters for the physical behavior of ascending magmas because they affect the formation of crystals and bubbles, as well as bulk viscosities of volcanic suspensions and their eruptive styles (e.g., effusive vs. hazardous explosive eruptions). However, the roles of CO2, S and Cl, in addition to H2O, on decompression induced crystallization (DIC) are still poorly understood. In this study, we investigated the DIC of a trachybasaltic magma, as a function of volatile content (H2O≈5wt.%; Cl≈0.7wt.%; ±CO2≈2000ppm; ±S≈3000ppm) and r. Isothermal decompression experiments were conducted at T=1030°C and log(fO2)≈QFM+2 (QFM: quartz-fayalite-magnetite buffer) by releasing pressure (P) continuously from 300 to 70MPa at r=0.01, 0.1 and 1MPa/s. The phase assemblages at 300MPa, before the onset of decompression were composed of 91 to 99area% melt/glass, 2 to 9area% clinopyroxene, ≪1 area% spinel and ≪1 area% bubbles; with higher cpx proportions in the CO2-bearing samples (i.e., at lower water activity). We compare our experimental results with numerical models of equilibrium degassing (using SolEx and DCompress), phase assemblages (using MELTS) and with literature data on phase stabilities in S-bearing and S-free systems. These comparisons reveal that near-equilibrium conditions are reached in all three investigated systems if decompressed at the lowest rate of 0.01. MPa/s before quenching. The crystallization of clinopyroxene during decompression at 0.1 and 0.01. MPa/s is strongly enhanced by the presence of S, whereas spinel shows less significant variations. Plagioclase, biotite and olivine only occur in the S-bearing samples decompressed at a r of 0.01. MPa/s. At r = 0.01. MPa/s (near-equilibrium) a crystallinity of ~ 60 area% was reached in the S-bearing system, while the S-free systems are characterized by a ~ 20 area% crystallinity. The strong influence of S on the crystallinity is mainly explained by an increasing thermal stability of clinopyroxene during decompression to 70. MPa, which is probably due to the lower water activity in the presence of S at P≤. 70. MPa and the increase of the liquidus T with decreasing water content in the melt (i.e., with decreasing P at volatile saturated conditions).Even though the viscosity of the S-bearing melt is relatively low during decompression, the increasing modal abundance of clinopyroxene (and other phases) can lead to a strong increase of the effective magma viscosity and, thus, can slow down magma ascent within the conduit and limit the escape of bubbles. Subsequently, the magma may either i) solidify at shallow depths or ii) new magma inputs and/or a P increase in the conduit owing to second boiling can induce an explosive eruption. Hence, the obtained experimental results indicate that S-bearing basaltic arc magmas have a higher chance to erupt explosively than S-poor basalts, especially if the ascent rate is relatively low.
KW - Arc basalt
KW - Clinopyroxene
KW - CO
KW - Decompression induced crystallization
KW - Sulfur
KW - Water
UR - http://www.scopus.com/inward/record.url?scp=84937707027&partnerID=8YFLogxK
U2 - 10.1016/j.chemgeo.2015.07.016
DO - 10.1016/j.chemgeo.2015.07.016
M3 - Article
AN - SCOPUS:84937707027
VL - 411
SP - 310
EP - 322
JO - Chemical Geology
JF - Chemical Geology
SN - 0009-2541
ER -