Details
| Original language | English |
|---|---|
| Pages (from-to) | 1887-1900 |
| Number of pages | 14 |
| Journal | Journal of Materials Research and Technology |
| Volume | 29 |
| Early online date | 29 Jan 2024 |
| Publication status | Published - Mar 2024 |
Abstract
The influence of thermo-mechanical processing on the microstructure and functional properties of a Fe–17Mn–5Si–10Cr–4Ni-1(V–C) (wt%) shape memory alloy was systematically investigated. The as-received material was subjected to 25 % cold rolling followed by a recrystallization at 925 °C and single or double aging treatments. Transmission electron microscopy revealed the formation of the ε-martensite and annealing twin boundaries and Shoji-Nishiyama orientation relationships of ε-martensite and γ-austenite in double aged specimen. Cyclic tensile testing demonstrated that the recrystallized and double aged alloy exhibited excellent pseudoelasticity. In the incremental strain test, the alloy achieved the highest peak stress and pseudoelasticity at each cycle. In the constant stresses test, the alloy accumulated a minimal residual strain of only 0.12 % over 50 cycles. This stability was attributed to a strong precipitation strengthening and the interactions between the martensite and the refined microstructural features. In addition, the recrystallized and double aged sample resulted in the greatest recovery stress of 450 MPa upon heating after pre-straining, because of its high yield strength suppressing new martensite formation during cooling process. The results of high-resolution transmission electron microscopy identified a non-Shoji-Nishiyama orientation relationship between the stress-induced ε-martensite after the stress recovery test and γ-austenite matrix, inducing additional irrecoverable strain and raising the recovery stress. Overall, the study can demonstrate that the tailored thermo-mechanical processing enables optimizing the functional performance of FeMnSi alloys.
Keywords
- FeMnSi shape memory alloys, Pseudoelastic effect, Recovery stress, Shape memory effect
ASJC Scopus subject areas
- Materials Science(all)
- Ceramics and Composites
- Materials Science(all)
- Biomaterials
- Materials Science(all)
- Surfaces, Coatings and Films
- Materials Science(all)
- Metals and Alloys
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Journal of Materials Research and Technology, Vol. 29, 03.2024, p. 1887-1900.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Tailoring functional properties of a FeMnSi shape memory alloy through thermo-mechanical processing
AU - Golrang, Mahbod
AU - Mohri, Maryam
AU - Ghafoori, Elyas
AU - Khodaverdi, Hesamodin
AU - Nili-Ahmadabadi, Mahmoud
N1 - Funding Information: The authors gratefully acknowledge the support from re-fer AG, Switzerland, for providing the material used in this research study. Financial support from the Iran National Science Foundation ( INSF ) through research grant No. 4015297 is also acknowledged by M.N.A.
PY - 2024/3
Y1 - 2024/3
N2 - The influence of thermo-mechanical processing on the microstructure and functional properties of a Fe–17Mn–5Si–10Cr–4Ni-1(V–C) (wt%) shape memory alloy was systematically investigated. The as-received material was subjected to 25 % cold rolling followed by a recrystallization at 925 °C and single or double aging treatments. Transmission electron microscopy revealed the formation of the ε-martensite and annealing twin boundaries and Shoji-Nishiyama orientation relationships of ε-martensite and γ-austenite in double aged specimen. Cyclic tensile testing demonstrated that the recrystallized and double aged alloy exhibited excellent pseudoelasticity. In the incremental strain test, the alloy achieved the highest peak stress and pseudoelasticity at each cycle. In the constant stresses test, the alloy accumulated a minimal residual strain of only 0.12 % over 50 cycles. This stability was attributed to a strong precipitation strengthening and the interactions between the martensite and the refined microstructural features. In addition, the recrystallized and double aged sample resulted in the greatest recovery stress of 450 MPa upon heating after pre-straining, because of its high yield strength suppressing new martensite formation during cooling process. The results of high-resolution transmission electron microscopy identified a non-Shoji-Nishiyama orientation relationship between the stress-induced ε-martensite after the stress recovery test and γ-austenite matrix, inducing additional irrecoverable strain and raising the recovery stress. Overall, the study can demonstrate that the tailored thermo-mechanical processing enables optimizing the functional performance of FeMnSi alloys.
AB - The influence of thermo-mechanical processing on the microstructure and functional properties of a Fe–17Mn–5Si–10Cr–4Ni-1(V–C) (wt%) shape memory alloy was systematically investigated. The as-received material was subjected to 25 % cold rolling followed by a recrystallization at 925 °C and single or double aging treatments. Transmission electron microscopy revealed the formation of the ε-martensite and annealing twin boundaries and Shoji-Nishiyama orientation relationships of ε-martensite and γ-austenite in double aged specimen. Cyclic tensile testing demonstrated that the recrystallized and double aged alloy exhibited excellent pseudoelasticity. In the incremental strain test, the alloy achieved the highest peak stress and pseudoelasticity at each cycle. In the constant stresses test, the alloy accumulated a minimal residual strain of only 0.12 % over 50 cycles. This stability was attributed to a strong precipitation strengthening and the interactions between the martensite and the refined microstructural features. In addition, the recrystallized and double aged sample resulted in the greatest recovery stress of 450 MPa upon heating after pre-straining, because of its high yield strength suppressing new martensite formation during cooling process. The results of high-resolution transmission electron microscopy identified a non-Shoji-Nishiyama orientation relationship between the stress-induced ε-martensite after the stress recovery test and γ-austenite matrix, inducing additional irrecoverable strain and raising the recovery stress. Overall, the study can demonstrate that the tailored thermo-mechanical processing enables optimizing the functional performance of FeMnSi alloys.
KW - FeMnSi shape memory alloys
KW - Pseudoelastic effect
KW - Recovery stress
KW - Shape memory effect
UR - http://www.scopus.com/inward/record.url?scp=85184081015&partnerID=8YFLogxK
U2 - 10.1016/j.jmrt.2024.01.248
DO - 10.1016/j.jmrt.2024.01.248
M3 - Article
AN - SCOPUS:85184081015
VL - 29
SP - 1887
EP - 1900
JO - Journal of Materials Research and Technology
JF - Journal of Materials Research and Technology
SN - 2238-7854
ER -