Details
| Original language | English |
|---|---|
| Title of host publication | Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021 |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| ISBN (electronic) | 9781728176215 |
| ISBN (print) | 978-1-7281-7622-2 |
| Publication status | Published - 2021 |
| Event | 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021 - Bali, Indonesia Duration: 27 Sept 2021 → 30 Sept 2021 |
Publication series
| Name | Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021 |
|---|---|
| ISSN (Print) | 2162-7673 |
| ISSN (electronic) | 2640-7469 |
Abstract
The transmission of a single conductor or filter can be determined analytically as well as with a measuring device such as the Vector Network Analyzer (VNA). Even small networks that cannot be calculated analytically can be determined with a network analyzer. The use of a network analyzer is not advisable in complex networks where the ports to be considered are spatially far apart. The measuring cables used for this would have to be very long, which increases the attenuation in the high-frequency range. This paper introduces a method for performing system identification on a branched 50 Ohm network using a signal generator and an oscilloscope. For this purpose, the network is stimulated with a transient signal and the system response is recorded. The transfer function can then be determined from this system response.
Keywords
- complex networks, double exponential pulse, system identification, time domain, transfer function
ASJC Scopus subject areas
- Computer Science(all)
- Computer Networks and Communications
- Engineering(all)
- Electrical and Electronic Engineering
- Physics and Astronomy(all)
- Instrumentation
- Physics and Astronomy(all)
- Radiation
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021. Institute of Electrical and Electronics Engineers Inc., 2021. (Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - System Identification of a Branched 50 Ohm Network by Transient Excitation
AU - Burghardt, Felix
AU - Feige, Nico
AU - Garbe, Heyno
N1 - Funding Information: The results shown in this paper were partly produced with the support of the Bundeswehr Research Institute for Protective Technologies – NBC-Protection in Munster, Germany. Contract Number E/E590/15440/HF112
PY - 2021
Y1 - 2021
N2 - The transmission of a single conductor or filter can be determined analytically as well as with a measuring device such as the Vector Network Analyzer (VNA). Even small networks that cannot be calculated analytically can be determined with a network analyzer. The use of a network analyzer is not advisable in complex networks where the ports to be considered are spatially far apart. The measuring cables used for this would have to be very long, which increases the attenuation in the high-frequency range. This paper introduces a method for performing system identification on a branched 50 Ohm network using a signal generator and an oscilloscope. For this purpose, the network is stimulated with a transient signal and the system response is recorded. The transfer function can then be determined from this system response.
AB - The transmission of a single conductor or filter can be determined analytically as well as with a measuring device such as the Vector Network Analyzer (VNA). Even small networks that cannot be calculated analytically can be determined with a network analyzer. The use of a network analyzer is not advisable in complex networks where the ports to be considered are spatially far apart. The measuring cables used for this would have to be very long, which increases the attenuation in the high-frequency range. This paper introduces a method for performing system identification on a branched 50 Ohm network using a signal generator and an oscilloscope. For this purpose, the network is stimulated with a transient signal and the system response is recorded. The transfer function can then be determined from this system response.
KW - complex networks
KW - double exponential pulse
KW - system identification
KW - time domain
KW - transfer function
UR - http://www.scopus.com/inward/record.url?scp=85123419434&partnerID=8YFLogxK
U2 - 10.1109/APEMC49932.2021.9597158
DO - 10.1109/APEMC49932.2021.9597158
M3 - Conference contribution
AN - SCOPUS:85123419434
SN - 978-1-7281-7622-2
T3 - Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021
BT - Proceedings of the 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2021 Asia-Pacific International Symposium on Electromagnetic Compatibility, APEMC 2021
Y2 - 27 September 2021 through 30 September 2021
ER -