Details
Original language | English |
---|---|
Pages (from-to) | 233-238 |
Number of pages | 6 |
Journal | Procedia CIRP |
Volume | 33 |
Publication status | Published - 1 Jan 2015 |
Event | 9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2014 - Capri, Italy Duration: 23 Jul 2014 → 25 Jul 2014 |
Abstract
Modern monitoring systems in machine tools are able to detect process errors promptly. Still, the application of monitoring systems is restricted by the complexity of parameterization for save monitoring. In most cases, only specially trained personnel can handle this job especially for multi-purpose machines. The aim of the research project "Proceed" is to figure out in which extent a self-parameterization and autonomous optimization of monitoring systems in industrial series production can be realized. Therefore, a self-adjusting and self-tuning process monitoring system for series production has been developed. This system is based on multi-criteria sensor signal evaluation and is able to assess its monitoring quality quantitatively. For this purpose, the complete process chain of parameterization has been automated. For series production it is assumed, that the first process is not defective. So, process sensitive features are identified by a correlation analysis with a reference signal. The reference signal is selected through an analysis of the process state by an expert system. To assess the monitoring quality resulting from automatic parameterization, normed specific values were used. These values describe the monitoring quality with the help of the distance between a feature and its threshold normed to signal amplitude and noise. A second indicator is the reaction of the monitoring system to a synthetic error added to signal a sequence. Thus it is possible to estimate monitoring quality corresponding to automatic parameterization. The validation is carried out by a comparison between the result of the assessment and the reaction ability of the monitoring system to real process errors from milling, drilling and turning processes.
Keywords
- Intelligent, Monitoring, Process
ASJC Scopus subject areas
- Engineering(all)
- Control and Systems Engineering
- Engineering(all)
- Industrial and Manufacturing Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Procedia CIRP, Vol. 33, 01.01.2015, p. 233-238.
Research output: Contribution to journal › Conference article › Research › peer review
}
TY - JOUR
T1 - Self-adjusting process monitoring system in series production
AU - Denkena, B.
AU - Dahlmann, D.
AU - Damm, J.
N1 - Funding information: At this point, the authors would like to thank the German Research Foundation (DFG) for its support of the research project Proceed (DE 447/96–1).
PY - 2015/1/1
Y1 - 2015/1/1
N2 - Modern monitoring systems in machine tools are able to detect process errors promptly. Still, the application of monitoring systems is restricted by the complexity of parameterization for save monitoring. In most cases, only specially trained personnel can handle this job especially for multi-purpose machines. The aim of the research project "Proceed" is to figure out in which extent a self-parameterization and autonomous optimization of monitoring systems in industrial series production can be realized. Therefore, a self-adjusting and self-tuning process monitoring system for series production has been developed. This system is based on multi-criteria sensor signal evaluation and is able to assess its monitoring quality quantitatively. For this purpose, the complete process chain of parameterization has been automated. For series production it is assumed, that the first process is not defective. So, process sensitive features are identified by a correlation analysis with a reference signal. The reference signal is selected through an analysis of the process state by an expert system. To assess the monitoring quality resulting from automatic parameterization, normed specific values were used. These values describe the monitoring quality with the help of the distance between a feature and its threshold normed to signal amplitude and noise. A second indicator is the reaction of the monitoring system to a synthetic error added to signal a sequence. Thus it is possible to estimate monitoring quality corresponding to automatic parameterization. The validation is carried out by a comparison between the result of the assessment and the reaction ability of the monitoring system to real process errors from milling, drilling and turning processes.
AB - Modern monitoring systems in machine tools are able to detect process errors promptly. Still, the application of monitoring systems is restricted by the complexity of parameterization for save monitoring. In most cases, only specially trained personnel can handle this job especially for multi-purpose machines. The aim of the research project "Proceed" is to figure out in which extent a self-parameterization and autonomous optimization of monitoring systems in industrial series production can be realized. Therefore, a self-adjusting and self-tuning process monitoring system for series production has been developed. This system is based on multi-criteria sensor signal evaluation and is able to assess its monitoring quality quantitatively. For this purpose, the complete process chain of parameterization has been automated. For series production it is assumed, that the first process is not defective. So, process sensitive features are identified by a correlation analysis with a reference signal. The reference signal is selected through an analysis of the process state by an expert system. To assess the monitoring quality resulting from automatic parameterization, normed specific values were used. These values describe the monitoring quality with the help of the distance between a feature and its threshold normed to signal amplitude and noise. A second indicator is the reaction of the monitoring system to a synthetic error added to signal a sequence. Thus it is possible to estimate monitoring quality corresponding to automatic parameterization. The validation is carried out by a comparison between the result of the assessment and the reaction ability of the monitoring system to real process errors from milling, drilling and turning processes.
KW - Intelligent
KW - Monitoring
KW - Process
UR - http://www.scopus.com/inward/record.url?scp=84939790372&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2015.06.042
DO - 10.1016/j.procir.2015.06.042
M3 - Conference article
AN - SCOPUS:84939790372
VL - 33
SP - 233
EP - 238
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2014
Y2 - 23 July 2014 through 25 July 2014
ER -