1061 - 1080 out of 1,537Page size: 20
  1. 2015
  2. Published

    Optimizing the exploration efficiency of autonomous Search and Rescue agents using a concept of layered robust communication

    Blatt, F., Becker, M. & Szczerbicka, H., 19 Oct 2015, Proceedings of 2015 IEEE 20th Conference on Emerging Technologies and Factory Automation, ETFA 2015. Institute of Electrical and Electronics Engineers Inc., 7301424. (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA; vol. 2015-October).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  3. Published

    Energy balance in precision hard machining with worn CBN cutting tools

    Grzesik, W., Denkena, B., Zak, K., Grove, T. & Bergmann, B., 18 Oct 2015.

    Research output: Contribution to conference › Paper › Research › peer review

  4. Published

    Electromagnetic Levitation Guide for Use in Ultra-Precision Milling Centres

    Denkena, B., Dahlmann, D. & Krüger, R., 9 Oct 2015, CIRPe 2015 - Understanding the Life Cycle Implications of Manufacturing. Erkoyuncu, J. (ed.). Elsevier Science B.V., p. 199-204 6 p. (Procedia CIRP; vol. 37).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Estimation of load history by residual stress relaxation

    Breidenstein, B., Denkena, B., Mörke, T. & Hockauf, R., 9 Oct 2015, CIRPe 2015 - Understanding the Life Cycle Implications of Manufacturing. Erkoyuncu, J. (ed.). Elsevier Science B.V., p. 236-241 6 p. (Procedia CIRP; vol. 37).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. Published

    Fluiddynamic planar drive with unrestrained rotational degree of freedom

    Denkena, B., Dahlmann, D. & Schumacher, T., 9 Oct 2015, CIRPe 2015 - Understanding the Life Cycle Implications of Manufacturing. Erkoyuncu, J. (ed.). Elsevier Science B.V., p. 71-76 6 p. (Procedia CIRP; vol. 37).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Investigation of the skive hobbing process by applying a dexel-based cutting simulation

    Böß, V., Denkena, B. & Henning, S., 9 Oct 2015, CIRPe 2015 - Understanding the Life Cycle Implications of Manufacturing. Erkoyuncu, J. (ed.). Elsevier Science B.V., p. 182-187 6 p. (Procedia CIRP; vol. 37).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters

    Vu-Bac, N., Rafiee, R., Zhuang, X., Lahmer, T. & Rabczuk, T., 22 Sept 2015, In: Composites Part B: Engineering. 68, p. 446-464 19 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Approach for Increasing the Resource Efficiency for the Production Process of Titanium Structural Components

    Denkena, B. & Jacob, S., 20 Sept 2015, In: Procedia CIRP. 35, p. 45-49 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  10. Published

    Enabling an Industrial Robot for Metal Cutting Operations

    Denkena, B. & Lepper, T., 20 Sept 2015, In: Procedia CIRP. 35, p. 79-84 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  11. Published

    Simulation and evaluation of different process strategies in a 5-axis re-contouring process

    Denkena, B., Böß, V., Nespor, D. & Rust, F., 20 Sept 2015, In: Procedia CIRP. 35, p. 31-37 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  12. Published

    Ultrafast Feed Drilling of Carbon Fiber-Reinforced Thermoplastics

    Kakinuma, Y., Ishida, T., Koike, R., Klemme, H., Denkena, B. & Aoyama, T., 20 Sept 2015, In: Procedia CIRP. 35, p. 91-95 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  13. Published

    Holistic consideration of grain growth behavior of tempering steel 34CrNiMo6 during heating processes

    Herbst, S., Besserer, H. B., Grydin, O., Milenin, A., Maier, H. J. & Nürnberger, F., 9 Sept 2015, In: Journal of Materials Processing Technology. 229, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    The Luxury of Sustainability: Examining Value-Based Drivers of Fair Trade Consumption

    Schmidt, S., Hennigs, N., Behrens, S. & Karampournioti, E., 19 Aug 2015, Environmental Footprints and Eco-Design of Products and Processes. p. 121-136 16 p. (Environmental Footprints and Eco-Design of Products and Processes).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  15. Published

    Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling

    Lucas, H., Denkena, B., Grove, T., Krebs, E., Kersting, P., Freiburg, D. & Biermann, D., 11 Aug 2015, In: HTM - Journal of Heat Treatment and Materials. 70, 4, p. 183-189 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Micro additive manufacturing using ultra short laser pulses

    In'T Veld, B. H., Overmeyer, L., Schmidt, M., Wegener, K., Malshe, A. & Bartolo, P., 15 Jul 2015, In: CIRP Annals - Manufacturing Technology. 64, 2, p. 701-724 24 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines

    Denkena, B., Eckl, M. & Lepper, T., 5 Jul 2015, In: International Journal of Automation Technology. 9, 4, p. 425-435 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Differences and similarities between the induced residual stresses after ball end milling and orthogonal cutting of Ti-6Al-4V

    Nespor, D., Denkena, B., Grove, T. & Böß, V., 4 Jul 2015, In: Journal of Materials Processing Technology. 226, p. 15-24 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Simulation-based planning of production capacity through integrative roadmapping in the wind turbine industry

    Denkena, B. & Winter, F., 2 Jul 2015, In: Procedia CIRP. 33, p. 105-110 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  20. Published

    Stock-Market Related Price Determination in Consideration of Time Dynamic Cost Factors

    Nemeti, A. & Denkena, B., 2 Jul 2015, In: Procedia CIRP. 33, p. 593-598 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  21. Influence of the flow channel coating of the high pressure capillary viscometer on the formation of wall slip effects in the case of rubber compounds

    Klie, B., Haberstroh, E., Giese, U., Brockhaus, S. & Schöppner, V., 1 Jul 2015, In: KGK Kautschuk Gummi Kunststoffe. 68, 7-8, p. 46-58 13 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1...50 51 52 53 54 55 56 57 ...77 Next