501 - 520 out of 1,537Page size: 20
  1. 2021
  2. Published

    Position sensor for active magnetic bearing with commercial linear optical encoders

    Tantau, M., Morantz, P. & Shore, P., 2021, In: CIRP Annals - Manufacturing Technology. 70, 1, p. 419-422 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation

    Denkena, B., Krödel, A., Mücke, A. & Ellersiek, L., 2021, In: CIRP Annals - Manufacturing Technology. 70, 1, p. 91-94 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Printing of laser-generated conductive copper tracks on 3D components

    Olsen, E. & Overmeyer, L., 2021, 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 9361618

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Sensory zero-point clamping system for condition and process monitoring

    Denkena, B., Bergmann, B., Kiesner, J. & Buhl, H., 2021, In: Procedia CIRP. 96, p. 359-364 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  6. Published

    Simulation-based digital twin for the manufacturing of thermoplastic composites

    Hürkamp, A., Lorenz, R., Ossowski, T., Behrens, B. A. & Dröder, K., 2021, In: Procedia CIRP. 100, p. 1-6 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  7. Published

    Simulation-based surface roughness modelling in end milling

    Denkena, B., Dittrich, M. A. & Huuk, J., 2021, In: Procedia CIRP. 99, p. 151-156 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  8. Published

    Simulation of an Electromagnetic Foil-Feeding Device

    Commichau, O., Höber, A., Behrens, B. A. & Krimm, R., 2021, Production at the leading edge of technology: Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Springer Nature, p. 86-95 10 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  9. Published

    Spezifikationen einer Entwicklungsumgebung zur Synthese einer patientenindividuellen Kurzschaftendoprothese der Hüfte

    Müller, P., Gembarski, P. C. & Lachmayer, R. J., 2021, Stuttgarter Symposium für Produktentwicklung SSP 2021: Stuttgart, 20. Mai 2021. p. 151-162 12 p. (Stuttgarter Symposium fur Produktentwicklung).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. Published

    The effects of hybrid order processing strategies on economic and logistic objectives

    Maier, J. T., Heuer, T., Nyhuis, P. & Schmidt, M., 2021, In: Procedia CIRP. 96, p. 266-271 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  11. Published

    Tool deflection compensation by drive signal-based force reconstruction and process control

    Denkena, B., Bergmann, B. & Stoppel, D., 2021, In: Procedia CIRP. 104, p. 571-575 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  12. Published

    Topology optimization of highly stressed machine tool components using the SLM process

    Denkena, B., Bergmann, B., Klemme, H., Beyer, R. E. & Blunk, H., 2021, Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2021. Leach, R. K., Nisbet, C. & Phillips, D. (eds.). p. 499-502 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. 2020
  14. Published

    Application of System Dynamics for Holistic Product-Service System Development

    Kloock-Schreiber, D., Gembarski, P. C. & Lachmayer, R., 24 Dec 2020, In: Procedia Manufacturing. 52, p. 209-214 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  15. Published

    Development of a domain-specific ontology to support research data management for the tailored forming technology

    Sheveleva, T., Koepler, O., Mozgova, I., Lachmayer, R. & Auer, S., 24 Dec 2020, In: Procedia Manufacturing. 52, p. 107-112 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  16. Published

    Identification of dynamic loads on structural component with artificial neural networks

    Altun, O., Zhang, D., Siqueira, R., Wolniak, P., Mozgova, I. & Lachmayer, R., 24 Dec 2020, In: Procedia Manufacturing. 52, p. 181-186 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  17. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Rich surface hydroxyl design for nanostructured TiO2 and its hole-trapping effect

    Xiao, S., Wu, S., Dong, Y., Liu, J., Wang, L., Wu, L., Zhang, Y., Tian, G., Janiak, C., Shalom, M., Wang, Y., Li, Y., Jia, R., Bahnemann, D. W. & Yang, X., 15 Nov 2020, In: Chemical engineering journal. 400, 125909.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Transfer Printing of Conductive Thin-Films on PDMS with Soluble Substrates for Flexible Biosensors

    Hadeler, S., Bengsch, S., Prediger, M. & Wurz, M., 14 Nov 2020, In: Engineering Proceedings. 2, 1, p. 8181

    Research output: Contribution to journal › Conference article › Research › peer review

  20. Published

    Numerical modeling and experimental validation of fatigue damage in Cross-Ply CFRP composites under inhomogeneous stress states

    Brod, M., Dean, A., Scheffler, S., Gerendt, C. & Rolfes, R., 1 Nov 2020, In: Composites Part B: Engineering. 200, 108050.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Brazing in SiH4-Doped Inert Gases: A New Approach to an Environment Friendly Production Process

    Holländer, U., Wulff, D., Langohr, A., Möhwald, K. & Maier, H. J., Nov 2020, In: International Journal of Precision Engineering and Manufacturing - Green Technology. 7, 6, p. 1059-1071 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Influence of thermal effects in turn-rolling

    Kuhlemann, P., Denkena, B., Krödel, A. & Beblein, S., Nov 2020, In: CIRP Journal of Manufacturing Science and Technology. 31, p. 294-304 11 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1...22 23 24 25 26 27 28 29 ...77 Next