2431 Results

1. 2024
2. Published

   Antioxidant flavonoid-loaded nano-bioactive glass bone paste: in vitro apatite formation and flow behavior

   Sohrabi, M., Hesaraki, S., Shahrezaee, M., Shams-Khorasani, A., Roshanfar, F., Glasmacher, B., Heinemann, S., Xu, Y. & Makvandi, P., 5 Jan 2024, In: Nanoscale Advances. 6, 3, p. 1011-1022 12 p.

   Research output: Contribution to journal › Article › Research › peer review

3. Published

   Machine learning assisted design of novel refractory high entropy alloys with enhanced mechanical properties

   Catal, A. A., Bedir, E., Yilmaz, R., Swider, M. A., Lee, C., El-Atwani, O., Maier, H. J., Ozdemir, H. C. & Canadinc, D., 5 Jan 2024, In: Computational materials science. 231, 112612.

   Research output: Contribution to journal › Article › Research › peer review

4. Published

   Predicting residual stresses in SLM additive manufacturing using a phase-field thermomechanical modeling framework

   Ali, B., Heider, Y. & Markert, B., 5 Jan 2024, In: Computational materials science. 231, 17 p., 112576.

   Research output: Contribution to journal › Article › Research › peer review

5. Published

   Reshaping of 3D GaN Structures during Annealing: Phenomenological Description and Mathematical Model

   Manglano Clavero, I., Margenfeld, C., Hartmann, J. & Waag, A., 3 Jan 2024, In: Crystal Growth and Design. 24, 1, p. 279-292 14 p.

   Research output: Contribution to journal › Article › Research › peer review

6. Published

   A representative volume element model to evaluate the effective properties of flexoelectric nanocomposite

   Hamdia, K. M., Jan 2024, In: European Journal of Mechanics, A/Solids. 103, 6 p., 105149.

   Research output: Contribution to journal › Article › Research › peer review

7. Published

   Frequency dependent amplitude response of different couplant materials for mounting piezoelectric sensors

   Xu, R., Beltrán-Gutiérrez, R. E., Käding, M., Lange, A., Marx, S. & Ostermann, J., Jan 2024, In: NDT and E International. 141, 9 p., 102993.

   Research output: Contribution to journal › Article › Research › peer review

8. Published

   Accelerating and breaking adaptive nano-colloids (<100 nm) into unsteady state operation via push-pull effects

   Lanz, C., Künnecke, N., Krysiak, Y. & Polarz, S., 2024, In: NANOSCALE. 16, 32, p. 15358-15365 8 p.

   Research output: Contribution to journal › Article › Research › peer review

9. Published

   Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming

   Peddinghaus, S., Till, M., Wester, H., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 842-850 9 p. (Materials Research Proceedings; vol. 41).

   Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

10. Published

    A novel characterization technique for hydrogels: in situ rheology-Raman spectroscopy for gelation and polymerization tracking

    Lambrecht, S., Biermann, M., Kara, S., Jopp, S. & Meyer, J., 2024, In: Materials Advances. 5, 17, p. 6957-6966 10 p.

    Research output: Contribution to journal › Article › Research › peer review

11. Published

    Dynamic response of piezoelectrically actuated bistable cross-ply laminates under oscillating impulse voltages

    Danish, B., Nair, A. P. M., Haldar, A. & Rao, B. N., 2024, In: Mechanics of Advanced Materials and Structures. 31, 28, p. 9981-10001 21 p.

    Research output: Contribution to journal › Article › Research › peer review

12. Published

    Effect of different oxide layer shares on the upsetting of titanium aluminide specimens

    Döring, S., Peddinghaus, J., Brunotte, K. & Behrens, B. A., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 958-967 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

13. Published

    Fatigue behaviour of wire arc additively manufactured sheet material

    Huang, C., Li, L., Pichler, N., Ghafoori, E. & Gardner, L., 2024, In: Procedia Structural Integrity. 57, p. 42-52 11 p.

    Research output: Contribution to journal › Conference article › Research › peer review

14. Published

    Fundamental and Practical Aspects of Tribology

    Berman, D., Rosenkranz, A. & Marian, M., 2024, 302 p.

    Research output: Book/Report › Monograph › Research › peer review

15. Published

    Influence of enlarged joining zone interfaces on the bond properties of tailored formed hybrid components made of 20MnCr5 steel and EN AW-6082 aluminium

    Piwek, A., Peddinghaus, J., Uhe, J. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 792-801 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

16. Published

    Manufacturing and Evaluation of Multimaterial Cylindrical Rolling Bearings by Plasma-Transferred Arc Welding

    Faqiri, Y., Saure, F., Coors, T., Pape, F., Hassel, T. & Poll, G., 2024, Bearing and Transmission Steels Technology: ASTM Selected Technical Papers. Beswick, J. (ed.). ASTM International, p. 201-226 26 p. (ASTM Special Technical Publication; vol. STP 1649).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

17. Published

    Numerical investigation of rotational friction welding for C22.8 - 41Cr4 joints using a substitute model

    Mohnfeld, N., Wester, H., Tunc Karaer, G., Piwek, A. & Uhe, J., 2024, Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 1668-1677 10 p. (Material Forming: ESAFORM 2024).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

18. Published

    Numerical process design for the production of a hybrid die made of tool steel X38CrMoV5.3 and inconel 718

    Siring, J., Heine, C., Till, M., Wester, H., Uhe, J., Behrens, B. A. & Brunotte, K., 2024, Material Forming, ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 812-821 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

19. Published

    Numerical recipes of virtual element method for phase field modeling of brittle fracture

    Liu, T. R., Aldakheel, F. & Aliabadi, M. H., 2024, In: Procedia Structural Integrity. 52, p. 740-751 12 p.

    Research output: Contribution to journal › Conference article › Research › peer review

20. Published

    Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing

    Araújo, A. J. M., Maor, I. I., Holz, L. I. V., Mann-Lahav, M., Beilin, V., Feldhoff, A., Grader, G. S. & Loureiro, F. J. A., 2024, In: Journal of Materials Chemistry A. 12, 38, p. 26266-26279 14 p.

    Research output: Contribution to journal › Article › Research › peer review

21. Published

    Potential of near-surface temperature regulation in hybrid additive manufactured forging dies

    Peddinghaus, J., Siegmund, M., Siring, J., Wester, H., Giedenbacher, J., Huskic, A., Behrens, B. & Brunotte, K., 2024, Materials Research Proceedings. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). p. 891-900 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review