1883 Results

1. 2022
2. Published

   General Approach And Prerequisites For Transferring Factory Planning Methods on Flow Orientation and Transformability to Hospital Systems

   Wecken, L., Faeghi, S., Hingst, L., Nyhuis, P. & Lennerts, K., 2022, Proceedings of the Conference on Production Systems and Logistics. Hannover, p. 435-444 10 p. ( Proceedings of the Conference on Production Systems and Logistics. CPSL).

   Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

3. Published

   Identification of material properties for finite element simulation of the deep rolling process applied to welded joints

   Heikebrügge, S., Breidenstein, B., Bergmann, B., Dänekas, C., Schaumann, P. & Schubnell, J., 2022, In: Procedia CIRP. 115, p. 30-35 6 p.

   Research output: Contribution to journal › Conference article › Research › peer review

4. Published

   Influence of an oxygen-free atmosphere on laser beam brazing of aluminium with prior surface deoxidation by pulsed laser radiation

   Aman, W., Nothdurft, S., Hermsdorf, J., Kaierle, S., Szafarska, M., Gustus, R., Maus-Friedrichs, W. & Overmeyer, L., 2022, In: Procedia CIRP. 111, p. 762-765 4 p.

   Research output: Contribution to journal › Conference article › Research › peer review

5. Published

   Influence of Friction-Reducing Powder-Compaction Tool Coatings on Green-Compact Properties

   Bohr, D., Petersen, T., Brunotte, K. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 349-356 8 p. (Lecture Notes in Production Engineering; vol. Part F1160).

   Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

6. Published

   Influence of laser spot oscillation parameters on the seam geometry and dilution in the LDNA process

   Bokelmann, T., Lammers, M., Hermsdorf, J., Emadmostoufi, S., Mokrov, O., Sharma, R., Reisgen, U. & Kaierle, S., 2022, In: Procedia CIRP. 111, p. 185-189 5 p.

   Research output: Contribution to journal › Conference article › Research › peer review

7. Published

   Influence of surface topography on junction strength of modular hip endoprostheses

   Denkena, B., Hurschler, C., Bergmann, B., Legutko, B., Gustav, M. & Welke, B., 2022, In: Procedia CIRP. 110, C, p. 64-69 6 p.

   Research output: Contribution to journal › Conference article › Research › peer review

8. Published

   Influence of the laser position in laser-assisted WAAM process on weld bead shape and surface properties

   Biester, K., Lammers, M., Hermsdorf, J. & Kaierle, S., 2022, In: Procedia CIRP. 111, p. 190-195 6 p.

   Research output: Contribution to journal › Conference article › Research › peer review

9. Published

   Intelligent Manufacturing Cell for Implants

   Denkena, B., Klemme, H., Kaiser, S. & Shanib, M., 2022, IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2022. IEEE Computer Society, p. 1578-1582 5 p. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2022-December).

   Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

10. Published

    Introduction to the Book

    Stjepandić, J., Sommer, M., Stobrawa, S. & Denkena, B., 2022, Springer Series in Advanced Manufacturing. Springer Nature, p. 1-11 11 p. (Springer Series in Advanced Manufacturing).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

11. Published

    Investigation of a Compression Molding Process for the Variant Flexible Production of a GMT Battery Shell

    Weichenhain, J., Althaus, P., Hübner, S., Wester, H., Rosenbusch, D. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 20-28 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

12. Investigations on microstructure and mechanical properties of laser beam-submerged arc hybrid welded butt joints of duplex stainless steel S31083 (t =16 mm) depending on the energy per unit length

    Lahdo, R., Nothdurft, S., Hermsdorf, J., Urbanek, P., Puschmann, M., Riedel, F., Overmeyer, L. & Kaierle, S., 2022, In: Procedia CIRP. 111, p. 409-414 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

13. Published

    Large-scale CO₂ laser-based sol-gel annealing of titanium dioxide on borosilicate glass

    Desens, M., Wesang, K., Rettschlag, K., Wermbter, K., Jäschke, P., Overmeyer, L. & Kaierle, S., 2022, In: Procedia CIRP. 111, p. 701-704 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

14. Laser Metal Deposition welding with high carbon steel wire material 100Cr6

    Budde, L., Lammers, M., Hermsdorf, J., Kaierle, S. & Overmeyer, L., 2022, In: Procedia CIRP. 111, p. 224-227 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

15. Published

    Life cycle cost impact of maintenance networks for product-service system fleets

    Schneider, J. A., Mozgova, I. & Lachmayer, R., 2022, In: Procedia CIRP. 105, p. 525-529 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

16. Published

    Linear-rotary direct drive for multi-functional machine tools

    Denkena, B. & Ahlborn, P., 2022, In: CIRP annals. 71, 1, p. 349-352 4 p.

    Research output: Contribution to journal › Article › Research › peer review

17. Published

    Macroscopic simulation model for laser cutting of carbon fibre reinforced plastics

    Keuntje, J., Mrzljak, S., Gerdes, L., Wippo, V., Kaierle, S., Overmeyer, L., Walther, F. & Jaeschke, P., 2022, In: Procedia CIRP. 111, p. 496-500 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

18. Published

    Marker-free identification of milled surfaces by analyzing stochastic and kinematic surface features by means of wavelet transformation

    Denkena, B., Breidenstein, B., Wichmann, M., Nordmeyer, H., Reuter, L. & Voelker, H., 2022, In: Procedia CIRP. 108, C, p. 264-269 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

19. Published

    Modelling of the coolant flow behaviour in the narrow-closed cutting gap during sawing with internal coolant supply

    Menze, C., Xiang, J., Möhring, H. C., Stegmann, J., Kabelac, S., Tismer, A., Wack, J. & Riedelbauch, S., 2022, Proceedings of the 22nd International Conference of the European Society for Precision Engineering and Nanotechnology: 30th May-3rd June 2022, Geneva, CH : conference proceedings. Leach, R. K., Akrofi-Ayesu, A., Nisbet, C. & Phillips, D. (eds.). Bedford, UK, p. 539-542 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

20. Multivariate parametric study on laser beam welding of copper lap joints using adjustable intensity profiles

    Rinne, J., Nothdurft, S., Hermsdorf, J., Kaierle, S. & Overmeyer, L., 2022, In: Procedia CIRP. 111, p. 415-419 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

21. Published

    Numerical Study on the Influence of the Initial Temperature Distribution on the Material Flow During Die Forging of a Semi-finished Aluminium-Titanium Product

    Büdenbender, C., Wester, H., Uhe, J. & Behrens, B. A., 2022, Lecture Notes in Production Engineering. Springer Nature, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review