Details
| Original language | English |
|---|---|
| Pages (from-to) | 329-334 |
| Number of pages | 6 |
| Journal | Procedia Manufacturing |
| Volume | 47 |
| Early online date | 26 Apr 2020 |
| Publication status | Published - 2020 |
| Event | 23rd International Conference on Material Forming, ESAFORM 2020 - Cottbus, Germany Duration: 4 May 2020 → … |
Abstract
Metal matrix composite materials are of high interest for their increased stiffness, strength or wear resistance. Wear resistant composites contain hard ceramic particles to reduce microcutting and grooving of the metal matrix surface. In this paper, a gas atomised hot work tool steel X40CrMoV5-1 (1.2344/AISI H13) was combined with fused tungsten carbide (FTC) particles in order to create forging tools with increased abrasive wear resistance. For that purpose, tool components were manufactured by sinter-forging of stacked powder layers to build up a graded hard phase concentration of up to 10 vol.-%. Subsequently, sinter-forged specimens were combined with basic hot work tool steel components and joined by diffusion bonding to assemble the complete tool. In order to evaluate their performance, the tools were examined in a hot backward can extrusion process of low-alloyed steel. Optical geometry measurements, light microscopy and scanning electron microscopy of the worn tool radii indicated a significant decrease in abrasive wear when using FTC-reinforced tools rather than conventional hardened tool steel.
Keywords
- Diffusion bonding, Hot forming, Metal matrix composites, Sinter-forging, Wear
ASJC Scopus subject areas
- Engineering(all)
- Industrial and Manufacturing Engineering
- Computer Science(all)
- Artificial Intelligence
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Procedia Manufacturing, Vol. 47, 2020, p. 329-334.
Research output: Contribution to journal › Conference article › Research › peer review
}
TY - JOUR
T1 - Production, Bonding and Application of Metal Matrix Composite Hot Forging Tool Components
AU - Behrens, Bernd-Arno
AU - Ursinus, Jonathan
N1 - Funding Information: This study was supported by JXTG Nippon Oil & Energy Corporation. Grant Number is B2R50Z004300. The first author performed this study as a Research Assistant under financial support by the Kagami Memorial Research Institute of Material Science and Technology of Waseda University. Funding Information: This study is part of the research project 'Development of a wear resistant and stress adapted modular forming tool, manufactured out of a ceramics reinforced metal matrix composite material (MMC), for the use in hot forging industry' funded by the German Research Foundation (DFG) under the Project number 312033221
PY - 2020
Y1 - 2020
N2 - Metal matrix composite materials are of high interest for their increased stiffness, strength or wear resistance. Wear resistant composites contain hard ceramic particles to reduce microcutting and grooving of the metal matrix surface. In this paper, a gas atomised hot work tool steel X40CrMoV5-1 (1.2344/AISI H13) was combined with fused tungsten carbide (FTC) particles in order to create forging tools with increased abrasive wear resistance. For that purpose, tool components were manufactured by sinter-forging of stacked powder layers to build up a graded hard phase concentration of up to 10 vol.-%. Subsequently, sinter-forged specimens were combined with basic hot work tool steel components and joined by diffusion bonding to assemble the complete tool. In order to evaluate their performance, the tools were examined in a hot backward can extrusion process of low-alloyed steel. Optical geometry measurements, light microscopy and scanning electron microscopy of the worn tool radii indicated a significant decrease in abrasive wear when using FTC-reinforced tools rather than conventional hardened tool steel.
AB - Metal matrix composite materials are of high interest for their increased stiffness, strength or wear resistance. Wear resistant composites contain hard ceramic particles to reduce microcutting and grooving of the metal matrix surface. In this paper, a gas atomised hot work tool steel X40CrMoV5-1 (1.2344/AISI H13) was combined with fused tungsten carbide (FTC) particles in order to create forging tools with increased abrasive wear resistance. For that purpose, tool components were manufactured by sinter-forging of stacked powder layers to build up a graded hard phase concentration of up to 10 vol.-%. Subsequently, sinter-forged specimens were combined with basic hot work tool steel components and joined by diffusion bonding to assemble the complete tool. In order to evaluate their performance, the tools were examined in a hot backward can extrusion process of low-alloyed steel. Optical geometry measurements, light microscopy and scanning electron microscopy of the worn tool radii indicated a significant decrease in abrasive wear when using FTC-reinforced tools rather than conventional hardened tool steel.
KW - Diffusion bonding
KW - Hot forming
KW - Metal matrix composites
KW - Sinter-forging
KW - Wear
UR - http://www.scopus.com/inward/record.url?scp=85085514695&partnerID=8YFLogxK
U2 - 10.1016/j.promfg.2020.04.268
DO - 10.1016/j.promfg.2020.04.268
M3 - Conference article
AN - SCOPUS:85085514695
VL - 47
SP - 329
EP - 334
JO - Procedia Manufacturing
JF - Procedia Manufacturing
SN - 2351-9789
T2 - 23rd International Conference on Material Forming, ESAFORM 2020
Y2 - 4 May 2020
ER -