Details
| Original language | English |
|---|---|
| Pages (from-to) | 126-132 |
| Number of pages | 7 |
| Journal | Procedia CIRP |
| Volume | 86 |
| Publication status | Published - 2019 |
| Event | 7th CIRP Global Web Conference, CIRPe 2019 - Berlin, Germany Duration: 16 Oct 2019 → 18 Oct 2019 |
Abstract
In production environment, grinding is often the last step along the process chain. At this step, the main share of the value chain is already manufactured. Correspondingly, the process result of this step directly influences the product quality. Thus, the avoidance of process induced damages is a major challenge in grinding. The major limiting factor in grinding is the thermal load on the workpiece, which leads to grinding burn and tensile residual stresses. This thermal load can be reduced, as previous fundamental studies have shown, by means of using microstructured grinding wheels. In this paper, the patterning process of profile grinding wheels is investigated with regard to the resulting geometry and the resulting grinding wheel topography. In detail, an analytical model is established and evaluated that enables a design of the patterning process of profile grinding wheels. The presented formulas describe the local depth and width of a pattern over its length of engagement. The influence of the inclination angle of the patterning tool and the profile angle of the grinding wheel on the resulting width and length of one pattern is investigated. Further influencing parameters on the size of a pattern that are investigated are e.g. the radius of the grinding wheel, the radius of the patterning tool, the corner radius of the patterning edge and the speed ratio between the grinding wheel and the patterning tool. In addition, grinding experiments were conducted to validate the process design. The results show a high correlation between the calculated and the resulting patterns on the grinding wheel as well as that a decrease in cutting forces can be achieved by this approach. When maintaining the workpiece and grinding wheel load, the productivity of the profile grinding process can be increased in this way.
Keywords
- Cast iron, Dexel simulation, Grinding, Patterning, Silicon carbide, Structured grinding wheel
ASJC Scopus subject areas
- Engineering(all)
- Control and Systems Engineering
- Engineering(all)
- Industrial and Manufacturing Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Procedia CIRP, Vol. 86, 2019, p. 126-132.
Research output: Contribution to journal › Conference article › Research › peer review
}
TY - JOUR
T1 - Process design of the patterning process of profile grinding wheels
AU - Denkena, B.
AU - Krödel, A.
AU - Gartzke, T.
N1 - Funding Information: The authors would like to thank the eF deral Ministry for Economic Affairs and Energy (BMWi) Germany for their organizational and financial support within the project I“ mprovement in performance of vitrified bonded corundum
PY - 2019
Y1 - 2019
N2 - In production environment, grinding is often the last step along the process chain. At this step, the main share of the value chain is already manufactured. Correspondingly, the process result of this step directly influences the product quality. Thus, the avoidance of process induced damages is a major challenge in grinding. The major limiting factor in grinding is the thermal load on the workpiece, which leads to grinding burn and tensile residual stresses. This thermal load can be reduced, as previous fundamental studies have shown, by means of using microstructured grinding wheels. In this paper, the patterning process of profile grinding wheels is investigated with regard to the resulting geometry and the resulting grinding wheel topography. In detail, an analytical model is established and evaluated that enables a design of the patterning process of profile grinding wheels. The presented formulas describe the local depth and width of a pattern over its length of engagement. The influence of the inclination angle of the patterning tool and the profile angle of the grinding wheel on the resulting width and length of one pattern is investigated. Further influencing parameters on the size of a pattern that are investigated are e.g. the radius of the grinding wheel, the radius of the patterning tool, the corner radius of the patterning edge and the speed ratio between the grinding wheel and the patterning tool. In addition, grinding experiments were conducted to validate the process design. The results show a high correlation between the calculated and the resulting patterns on the grinding wheel as well as that a decrease in cutting forces can be achieved by this approach. When maintaining the workpiece and grinding wheel load, the productivity of the profile grinding process can be increased in this way.
AB - In production environment, grinding is often the last step along the process chain. At this step, the main share of the value chain is already manufactured. Correspondingly, the process result of this step directly influences the product quality. Thus, the avoidance of process induced damages is a major challenge in grinding. The major limiting factor in grinding is the thermal load on the workpiece, which leads to grinding burn and tensile residual stresses. This thermal load can be reduced, as previous fundamental studies have shown, by means of using microstructured grinding wheels. In this paper, the patterning process of profile grinding wheels is investigated with regard to the resulting geometry and the resulting grinding wheel topography. In detail, an analytical model is established and evaluated that enables a design of the patterning process of profile grinding wheels. The presented formulas describe the local depth and width of a pattern over its length of engagement. The influence of the inclination angle of the patterning tool and the profile angle of the grinding wheel on the resulting width and length of one pattern is investigated. Further influencing parameters on the size of a pattern that are investigated are e.g. the radius of the grinding wheel, the radius of the patterning tool, the corner radius of the patterning edge and the speed ratio between the grinding wheel and the patterning tool. In addition, grinding experiments were conducted to validate the process design. The results show a high correlation between the calculated and the resulting patterns on the grinding wheel as well as that a decrease in cutting forces can be achieved by this approach. When maintaining the workpiece and grinding wheel load, the productivity of the profile grinding process can be increased in this way.
KW - Cast iron
KW - Dexel simulation
KW - Grinding
KW - Patterning
KW - Silicon carbide
KW - Structured grinding wheel
UR - http://www.scopus.com/inward/record.url?scp=85081567441&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2020.01.011
DO - 10.1016/j.procir.2020.01.011
M3 - Conference article
VL - 86
SP - 126
EP - 132
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 7th CIRP Global Web Conference, CIRPe 2019
Y2 - 16 October 2019 through 18 October 2019
ER -