Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Authors

  • U. Jagau
  • K. P. Dyck
  • H. Grabinski
  • H. J. Iden
  • M. Kuboschek

Research Organisations

View graph of relations

Details

Original languageEnglish
Title of host publication1990 Proc Int Conf Wafer Scale Integr
EditorsJoe Brewer, Michael J. Little
Pages288-297
Number of pages10
Publication statusPublished - 1990
Event1990 International Conference on Wafer Scale Integration - San Francisco, United States
Duration: 23 Jan 1990 → 25 Jan 1990

Publication series

Name1990 Proc Int Conf Wafer Scale Integr

Abstract

Investigations have shown that the layout of power lines and isolation circuits as well as the modules' circuit switching has a large influence on the behavior of the whole system. A current estimation strategy for the calculation of the module current consumption in CMOS technology is investigated. The electrical behavior of losses in signal and power lines is taken into account. An efficient current estimation is introduced with a new program-SIMCURRENT. Another program carries out analog circuit simulations including the modelling of coupled lossy transmission lines. Fast and accurate estimates of the I/sub dd/-current are carried out by SIMCURRENT. Simulations-often not possible with classical circuit analysis programs-were made with the program LISM. Regarding monolithic systems, one must include power isolation circuits in the power rail system. A proper layout of the global supply network (not using the lowest resistive layout) is proposed.

ASJC Scopus subject areas

Cite this

Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits. / Jagau, U.; Dyck, K. P.; Grabinski, H. et al.
1990 Proc Int Conf Wafer Scale Integr. ed. / Joe Brewer; Michael J. Little. 1990. p. 288-297 (1990 Proc Int Conf Wafer Scale Integr).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Jagau, U, Dyck, KP, Grabinski, H, Iden, HJ & Kuboschek, M 1990, Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits. in J Brewer & MJ Little (eds), 1990 Proc Int Conf Wafer Scale Integr. 1990 Proc Int Conf Wafer Scale Integr, pp. 288-297, 1990 International Conference on Wafer Scale Integration, San Francisco, California, United States, 23 Jan 1990. https://doi.org/10.1109/ICWSI.1990.63912
Jagau, U., Dyck, K. P., Grabinski, H., Iden, H. J., & Kuboschek, M. (1990). Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits. In J. Brewer, & M. J. Little (Eds.), 1990 Proc Int Conf Wafer Scale Integr (pp. 288-297). (1990 Proc Int Conf Wafer Scale Integr). https://doi.org/10.1109/ICWSI.1990.63912
Jagau U, Dyck KP, Grabinski H, Iden HJ, Kuboschek M. Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits. In Brewer J, Little MJ, editors, 1990 Proc Int Conf Wafer Scale Integr. 1990. p. 288-297. (1990 Proc Int Conf Wafer Scale Integr). doi: 10.1109/ICWSI.1990.63912
Jagau, U. ; Dyck, K. P. ; Grabinski, H. et al. / Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits. 1990 Proc Int Conf Wafer Scale Integr. editor / Joe Brewer ; Michael J. Little. 1990. pp. 288-297 (1990 Proc Int Conf Wafer Scale Integr).
Download
@inproceedings{d4a46c9cb99d4129842d96912dce0424,
title = "Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits",
abstract = "Investigations have shown that the layout of power lines and isolation circuits as well as the modules' circuit switching has a large influence on the behavior of the whole system. A current estimation strategy for the calculation of the module current consumption in CMOS technology is investigated. The electrical behavior of losses in signal and power lines is taken into account. An efficient current estimation is introduced with a new program-SIMCURRENT. Another program carries out analog circuit simulations including the modelling of coupled lossy transmission lines. Fast and accurate estimates of the I/sub dd/-current are carried out by SIMCURRENT. Simulations-often not possible with classical circuit analysis programs-were made with the program LISM. Regarding monolithic systems, one must include power isolation circuits in the power rail system. A proper layout of the global supply network (not using the lowest resistive layout) is proposed.",
author = "U. Jagau and Dyck, {K. P.} and H. Grabinski and Iden, {H. J.} and M. Kuboschek",
year = "1990",
doi = "10.1109/ICWSI.1990.63912",
language = "English",
isbn = "0818690135",
series = "1990 Proc Int Conf Wafer Scale Integr",
pages = "288--297",
editor = "Joe Brewer and Little, {Michael J.}",
booktitle = "1990 Proc Int Conf Wafer Scale Integr",
note = "1990 International Conference on Wafer Scale Integration ; Conference date: 23-01-1990 Through 25-01-1990",

}

Download

TY - GEN

T1 - Power distribution strategies based on current estimation and simulation of lossy transmission lines in conjunction with power isolation circuits

AU - Jagau, U.

AU - Dyck, K. P.

AU - Grabinski, H.

AU - Iden, H. J.

AU - Kuboschek, M.

PY - 1990

Y1 - 1990

N2 - Investigations have shown that the layout of power lines and isolation circuits as well as the modules' circuit switching has a large influence on the behavior of the whole system. A current estimation strategy for the calculation of the module current consumption in CMOS technology is investigated. The electrical behavior of losses in signal and power lines is taken into account. An efficient current estimation is introduced with a new program-SIMCURRENT. Another program carries out analog circuit simulations including the modelling of coupled lossy transmission lines. Fast and accurate estimates of the I/sub dd/-current are carried out by SIMCURRENT. Simulations-often not possible with classical circuit analysis programs-were made with the program LISM. Regarding monolithic systems, one must include power isolation circuits in the power rail system. A proper layout of the global supply network (not using the lowest resistive layout) is proposed.

AB - Investigations have shown that the layout of power lines and isolation circuits as well as the modules' circuit switching has a large influence on the behavior of the whole system. A current estimation strategy for the calculation of the module current consumption in CMOS technology is investigated. The electrical behavior of losses in signal and power lines is taken into account. An efficient current estimation is introduced with a new program-SIMCURRENT. Another program carries out analog circuit simulations including the modelling of coupled lossy transmission lines. Fast and accurate estimates of the I/sub dd/-current are carried out by SIMCURRENT. Simulations-often not possible with classical circuit analysis programs-were made with the program LISM. Regarding monolithic systems, one must include power isolation circuits in the power rail system. A proper layout of the global supply network (not using the lowest resistive layout) is proposed.

UR - http://www.scopus.com/inward/record.url?scp=0025207877&partnerID=8YFLogxK

U2 - 10.1109/ICWSI.1990.63912

DO - 10.1109/ICWSI.1990.63912

M3 - Conference contribution

AN - SCOPUS:0025207877

SN - 0818690135

T3 - 1990 Proc Int Conf Wafer Scale Integr

SP - 288

EP - 297

BT - 1990 Proc Int Conf Wafer Scale Integr

A2 - Brewer, Joe

A2 - Little, Michael J.

T2 - 1990 International Conference on Wafer Scale Integration

Y2 - 23 January 1990 through 25 January 1990

ER -