Details
| Original language | English |
|---|---|
| Pages (from-to) | 452-470 |
| Number of pages | 19 |
| Journal | Journal of the Korean Ceramic Society |
| Volume | 58 |
| Issue number | 4 |
| Early online date | 12 May 2021 |
| Publication status | Published - Jul 2021 |
Abstract
The aim of this investigation is to compare the properties of poly(phospho-siloxo) and poly(sialate-siloxo) networks. Commercial sodium waterglass and sodium waterglass from rice husk ash were used as alkaline reagents and phosphoric acid with molarities 8 and 10 M was used as acid reagents. Local metakaolin and commercial ones containing 0.99 and 0.0% of Fe2O3, respectively, were used as aluminosilicate sources. The physical properties of the prepared poly(phospho-siloxo) and poly(sialate-siloxo) networks were monitored by measuring the apparent and absolute density. The microstructures were assessed by scanning electron microscopy and mercury intrusion porosimetry. The engineering property was checked by the determination of their compressive strengths. The results indicated that the apparent densities of poly(phospho-siloxo) and poly(sialate-siloxo) networks are in the ranges 1.918–2.177 and 1.814–1.959 g/cm3, respectively, while their absolute densities are not significantly different. Their compressive strengths are ranging from 14.21 to 30.03 and 50.22 to 75.77 MPa, respectively. The average pore diameters of the specimens from acid reagents are between 30.0 and 83.9 nm whereas those from alkaline reagents are between 8.3 and 14.8 nm. The log differential intrusion versus pore size diameters showed that the obtained products using acid and alkaline solutions are ranging from 6000 to 110,000 nm and 5.59 to 13.84 nm, respectively. This indicates that poly(phospho-siloxo) and poly(sialate-siloxo) networks are macroporous and mesoporous materials, respectively. It was found that the chemical and mineralogical compositions and the degree of the purity of the aluminosilicate source could significantly affect the physical properties and microstructures of poly(phospho-siloxo) network.
Keywords
- Metakaolins, Microstructures, Phosphoric acid, Poly(phospho-siloxo), Poly(sialate-siloxo), Sodium waterglass
ASJC Scopus subject areas
- Materials Science(all)
- Ceramics and Composites
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Journal of the Korean Ceramic Society, Vol. 58, No. 4, 07.2021, p. 452-470.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Physical properties and microstructures of poly(phospho-siloxo) and poly(sialate-siloxo) networks from two metakaolins
AU - Banenzoué, C.
AU - Bewa, C. N.
AU - Fotio, D.
AU - Tchakouté, H. K.
AU - Tchanga, B. T.
AU - Rüscher, C. H.
N1 - Funding Information: Dr. Tchakouté Kouamo Hervé gratefully acknowledges the Alexander von Humboldt Foundation for its financial support to this work under grant N KAM/1155741 GFHERMES-P. The authors would like to thank Mr Valerie Petrov for SEM observations. °
PY - 2021/7
Y1 - 2021/7
N2 - The aim of this investigation is to compare the properties of poly(phospho-siloxo) and poly(sialate-siloxo) networks. Commercial sodium waterglass and sodium waterglass from rice husk ash were used as alkaline reagents and phosphoric acid with molarities 8 and 10 M was used as acid reagents. Local metakaolin and commercial ones containing 0.99 and 0.0% of Fe2O3, respectively, were used as aluminosilicate sources. The physical properties of the prepared poly(phospho-siloxo) and poly(sialate-siloxo) networks were monitored by measuring the apparent and absolute density. The microstructures were assessed by scanning electron microscopy and mercury intrusion porosimetry. The engineering property was checked by the determination of their compressive strengths. The results indicated that the apparent densities of poly(phospho-siloxo) and poly(sialate-siloxo) networks are in the ranges 1.918–2.177 and 1.814–1.959 g/cm3, respectively, while their absolute densities are not significantly different. Their compressive strengths are ranging from 14.21 to 30.03 and 50.22 to 75.77 MPa, respectively. The average pore diameters of the specimens from acid reagents are between 30.0 and 83.9 nm whereas those from alkaline reagents are between 8.3 and 14.8 nm. The log differential intrusion versus pore size diameters showed that the obtained products using acid and alkaline solutions are ranging from 6000 to 110,000 nm and 5.59 to 13.84 nm, respectively. This indicates that poly(phospho-siloxo) and poly(sialate-siloxo) networks are macroporous and mesoporous materials, respectively. It was found that the chemical and mineralogical compositions and the degree of the purity of the aluminosilicate source could significantly affect the physical properties and microstructures of poly(phospho-siloxo) network.
AB - The aim of this investigation is to compare the properties of poly(phospho-siloxo) and poly(sialate-siloxo) networks. Commercial sodium waterglass and sodium waterglass from rice husk ash were used as alkaline reagents and phosphoric acid with molarities 8 and 10 M was used as acid reagents. Local metakaolin and commercial ones containing 0.99 and 0.0% of Fe2O3, respectively, were used as aluminosilicate sources. The physical properties of the prepared poly(phospho-siloxo) and poly(sialate-siloxo) networks were monitored by measuring the apparent and absolute density. The microstructures were assessed by scanning electron microscopy and mercury intrusion porosimetry. The engineering property was checked by the determination of their compressive strengths. The results indicated that the apparent densities of poly(phospho-siloxo) and poly(sialate-siloxo) networks are in the ranges 1.918–2.177 and 1.814–1.959 g/cm3, respectively, while their absolute densities are not significantly different. Their compressive strengths are ranging from 14.21 to 30.03 and 50.22 to 75.77 MPa, respectively. The average pore diameters of the specimens from acid reagents are between 30.0 and 83.9 nm whereas those from alkaline reagents are between 8.3 and 14.8 nm. The log differential intrusion versus pore size diameters showed that the obtained products using acid and alkaline solutions are ranging from 6000 to 110,000 nm and 5.59 to 13.84 nm, respectively. This indicates that poly(phospho-siloxo) and poly(sialate-siloxo) networks are macroporous and mesoporous materials, respectively. It was found that the chemical and mineralogical compositions and the degree of the purity of the aluminosilicate source could significantly affect the physical properties and microstructures of poly(phospho-siloxo) network.
KW - Metakaolins
KW - Microstructures
KW - Phosphoric acid
KW - Poly(phospho-siloxo)
KW - Poly(sialate-siloxo)
KW - Sodium waterglass
UR - http://www.scopus.com/inward/record.url?scp=85105848149&partnerID=8YFLogxK
U2 - 10.1007/s43207-021-00122-8
DO - 10.1007/s43207-021-00122-8
M3 - Article
AN - SCOPUS:85105848149
VL - 58
SP - 452
EP - 470
JO - Journal of the Korean Ceramic Society
JF - Journal of the Korean Ceramic Society
SN - 1229-7801
IS - 4
ER -