Details
| Original language | English |
|---|---|
| Article number | 9195495 |
| Pages (from-to) | 3225-3232 |
| Number of pages | 8 |
| Journal | IEEE Sensors Journal |
| Volume | 21 |
| Issue number | 3 |
| Publication status | Published - 1 Feb 2021 |
Abstract
Wireless sensor nodes spend most of their time in standby mode and wake up periodically to send measurement data. Typically, a radio-frequency antenna is coupled with an amplifier to provide this wake-up function; together, these two elements recognize instances of radio signal activation. Even during standby operation, the sensor node utilizes a certain base amount of energy, which can be critical when using an energy-harvesting source. In this study, we propose a novel optical approach to the wake-up function for autonomous sensor nodes, which employs a solar cell as the wake-up signal detector. A bright light flash coming from another node or a smartphone hits a solar cell and activates the sensor node. Unlike photodiodes or RF-antennas, solar cells do not require any additional energy to detect such a signal. Therefore, the proposed electrical circuit allows the sensor node to wake-up from a complete power-off state. The solar cell of the novel wake-up receiver has an area of sensitivity of 8 mm ×10 mm. The wake-up signal can be recognized from a maximum distance of 25 cm at a range of ambient illumination from 0-1600 lx with a transmitter optical power of 20 mW. In the power-off state, the power consumption of this novel design is the lowest of all existing off-the-shelf wake-up receivers: 248 pW at 0 lx and 627 nW at 1600 lx.
Keywords
- eess.SP, Wireless sensor networks, autonomous sensors, optical wireless communication, energy harvesting, wake-up receiver, visible light communication, solar cell
ASJC Scopus subject areas
- Physics and Astronomy(all)
- Instrumentation
- Engineering(all)
- Electrical and Electronic Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: IEEE Sensors Journal, Vol. 21, No. 3, 9195495, 01.02.2021, p. 3225-3232.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Optical Wake-Up From Power-Off State for Autonomous Sensor Nodes
AU - Dudko, Uliana
AU - Overmeyer, Ludger
N1 - Funding Information: Manuscript received June 4, 2020; revised August 2, 2020 and September 3, 2020; accepted September 8, 2020. Date of publication September 14, 2020; date of current version January 6, 2021. This work was financially supported by the Lower Saxony Ministry for Science and Culture (Germany) within the framework of the Tailored Light Project. The associate editor coordinating the review of this article and approving it for publication was Dr. Yongjia Li. (Corresponding author: Uliana Dudko.) The authors are with the Institute of Transport and Automation Technology, Leibniz Universität Hannover, 30823 Garbsen, Germany (e-mail: uliana.dudko@ita.uni-hannover.de; ludger.overmeyer@ita.uni-hannover.de). Digital Object Identifier 10.1109/JSEN.2020.3023817
PY - 2021/2/1
Y1 - 2021/2/1
N2 - Wireless sensor nodes spend most of their time in standby mode and wake up periodically to send measurement data. Typically, a radio-frequency antenna is coupled with an amplifier to provide this wake-up function; together, these two elements recognize instances of radio signal activation. Even during standby operation, the sensor node utilizes a certain base amount of energy, which can be critical when using an energy-harvesting source. In this study, we propose a novel optical approach to the wake-up function for autonomous sensor nodes, which employs a solar cell as the wake-up signal detector. A bright light flash coming from another node or a smartphone hits a solar cell and activates the sensor node. Unlike photodiodes or RF-antennas, solar cells do not require any additional energy to detect such a signal. Therefore, the proposed electrical circuit allows the sensor node to wake-up from a complete power-off state. The solar cell of the novel wake-up receiver has an area of sensitivity of 8 mm ×10 mm. The wake-up signal can be recognized from a maximum distance of 25 cm at a range of ambient illumination from 0-1600 lx with a transmitter optical power of 20 mW. In the power-off state, the power consumption of this novel design is the lowest of all existing off-the-shelf wake-up receivers: 248 pW at 0 lx and 627 nW at 1600 lx.
AB - Wireless sensor nodes spend most of their time in standby mode and wake up periodically to send measurement data. Typically, a radio-frequency antenna is coupled with an amplifier to provide this wake-up function; together, these two elements recognize instances of radio signal activation. Even during standby operation, the sensor node utilizes a certain base amount of energy, which can be critical when using an energy-harvesting source. In this study, we propose a novel optical approach to the wake-up function for autonomous sensor nodes, which employs a solar cell as the wake-up signal detector. A bright light flash coming from another node or a smartphone hits a solar cell and activates the sensor node. Unlike photodiodes or RF-antennas, solar cells do not require any additional energy to detect such a signal. Therefore, the proposed electrical circuit allows the sensor node to wake-up from a complete power-off state. The solar cell of the novel wake-up receiver has an area of sensitivity of 8 mm ×10 mm. The wake-up signal can be recognized from a maximum distance of 25 cm at a range of ambient illumination from 0-1600 lx with a transmitter optical power of 20 mW. In the power-off state, the power consumption of this novel design is the lowest of all existing off-the-shelf wake-up receivers: 248 pW at 0 lx and 627 nW at 1600 lx.
KW - eess.SP
KW - Wireless sensor networks
KW - autonomous sensors
KW - optical wireless communication
KW - energy harvesting
KW - wake-up receiver
KW - visible light communication
KW - solar cell
UR - http://www.scopus.com/inward/record.url?scp=85099205121&partnerID=8YFLogxK
U2 - 10.1109/JSEN.2020.3023817
DO - 10.1109/JSEN.2020.3023817
M3 - Article
VL - 21
SP - 3225
EP - 3232
JO - IEEE Sensors Journal
JF - IEEE Sensors Journal
SN - 1530-437X
IS - 3
M1 - 9195495
ER -