On using autoencoders with non-standardized time series data for damage localization

Research output: Contribution to journalArticleResearchpeer review

View graph of relations

Details

Original languageEnglish
Article number117570
JournalEngineering structures
Volume303
Early online date28 Jan 2024
Publication statusPublished - 15 Mar 2024

Abstract

In this paper, an autoencoder trained with non-standardized time series data and evaluated using covariance-based residuals for generally applicable unsupervised damage localization is investigated. Raw acceleration time series are used as the inputs for the autoencoder to give both these features: no loss of information and exploitation of the full potential of the neural network. When it comes to output-only and unsupervised structural health monitoring (SHM), data-driven models struggle to localize the positions of damage adequately or only work well in a small range of applications. Regarding neural networks, expertise is needed for the neural network dimensioning and understanding of structural dynamics, which increases the difficulty of the task. In order to simplify the process, an automated solution is provided to perform the neural architecture search, and principal component analysis (PCA) is used to find a good choice for the bottleneck dimension. As an extension of the model, the residuals between the original and reconstructed time series are evaluated using the covariance between each input signal and each residual time series, which results in improved indicators for damage localization. We demonstrate the efficiency of the proposed schemes for damage analysis in a series of simulations using a three-mass swinger, in which the autoencoder can localize the damage using varying excitation locations. The covariances’ evaluation indicates that they are more potent than using the reconstruction error. Finally, experimental validation is conducted using vibration test data from a lattice tower called Leibniz University Structure for Monitoring (LUMO) under ambient excitation. For each damage pattern, high sensitivity towards local stiffness is achieved. Additionally, the damage position indicators exhibit a clear decreasing trend as the distance from the damage increases. The autoencoders presented here with non-standardized time series and covariance-based evaluation of residuals lead to increased robustness and sensitivity regarding damage localization.

Keywords

    Autoencoder, Data-driven model, PCA, Structural health monitoring, Unsupervised damage localization

ASJC Scopus subject areas

Cite this

On using autoencoders with non-standardized time series data for damage localization. / Römgens, Niklas; Abbassi, Abderrahim; Jonscher, Clemens et al.
In: Engineering structures, Vol. 303, 117570, 15.03.2024.

Research output: Contribution to journalArticleResearchpeer review

Download
@article{451e849bc0aa4b06a1d15bff93616f5e,
title = "On using autoencoders with non-standardized time series data for damage localization",
abstract = "In this paper, an autoencoder trained with non-standardized time series data and evaluated using covariance-based residuals for generally applicable unsupervised damage localization is investigated. Raw acceleration time series are used as the inputs for the autoencoder to give both these features: no loss of information and exploitation of the full potential of the neural network. When it comes to output-only and unsupervised structural health monitoring (SHM), data-driven models struggle to localize the positions of damage adequately or only work well in a small range of applications. Regarding neural networks, expertise is needed for the neural network dimensioning and understanding of structural dynamics, which increases the difficulty of the task. In order to simplify the process, an automated solution is provided to perform the neural architecture search, and principal component analysis (PCA) is used to find a good choice for the bottleneck dimension. As an extension of the model, the residuals between the original and reconstructed time series are evaluated using the covariance between each input signal and each residual time series, which results in improved indicators for damage localization. We demonstrate the efficiency of the proposed schemes for damage analysis in a series of simulations using a three-mass swinger, in which the autoencoder can localize the damage using varying excitation locations. The covariances{\textquoteright} evaluation indicates that they are more potent than using the reconstruction error. Finally, experimental validation is conducted using vibration test data from a lattice tower called Leibniz University Structure for Monitoring (LUMO) under ambient excitation. For each damage pattern, high sensitivity towards local stiffness is achieved. Additionally, the damage position indicators exhibit a clear decreasing trend as the distance from the damage increases. The autoencoders presented here with non-standardized time series and covariance-based evaluation of residuals lead to increased robustness and sensitivity regarding damage localization.",
keywords = "Autoencoder, Data-driven model, PCA, Structural health monitoring, Unsupervised damage localization",
author = "Niklas R{\"o}mgens and Abderrahim Abbassi and Clemens Jonscher and Tanja Grie{\ss}mann and Raimund Rolfes",
note = "Funding Information: The authors gratefully acknowledge the financial support provided by the Federal Ministry for Economic Affairs and Climate Action of the Federal Republic of Germany within the framework of the collaborative research project Grout-WATCH ( FKZ 03SX505B ) and SMARTower ( FKZ 03EE2041C ). All authors approved the version of the manuscript to be published.",
year = "2024",
month = mar,
day = "15",
doi = "10.1016/j.engstruct.2024.117570",
language = "English",
volume = "303",
journal = "Engineering structures",
issn = "0141-0296",
publisher = "Elsevier BV",

}

Download

TY - JOUR

T1 - On using autoencoders with non-standardized time series data for damage localization

AU - Römgens, Niklas

AU - Abbassi, Abderrahim

AU - Jonscher, Clemens

AU - Grießmann, Tanja

AU - Rolfes, Raimund

N1 - Funding Information: The authors gratefully acknowledge the financial support provided by the Federal Ministry for Economic Affairs and Climate Action of the Federal Republic of Germany within the framework of the collaborative research project Grout-WATCH ( FKZ 03SX505B ) and SMARTower ( FKZ 03EE2041C ). All authors approved the version of the manuscript to be published.

PY - 2024/3/15

Y1 - 2024/3/15

N2 - In this paper, an autoencoder trained with non-standardized time series data and evaluated using covariance-based residuals for generally applicable unsupervised damage localization is investigated. Raw acceleration time series are used as the inputs for the autoencoder to give both these features: no loss of information and exploitation of the full potential of the neural network. When it comes to output-only and unsupervised structural health monitoring (SHM), data-driven models struggle to localize the positions of damage adequately or only work well in a small range of applications. Regarding neural networks, expertise is needed for the neural network dimensioning and understanding of structural dynamics, which increases the difficulty of the task. In order to simplify the process, an automated solution is provided to perform the neural architecture search, and principal component analysis (PCA) is used to find a good choice for the bottleneck dimension. As an extension of the model, the residuals between the original and reconstructed time series are evaluated using the covariance between each input signal and each residual time series, which results in improved indicators for damage localization. We demonstrate the efficiency of the proposed schemes for damage analysis in a series of simulations using a three-mass swinger, in which the autoencoder can localize the damage using varying excitation locations. The covariances’ evaluation indicates that they are more potent than using the reconstruction error. Finally, experimental validation is conducted using vibration test data from a lattice tower called Leibniz University Structure for Monitoring (LUMO) under ambient excitation. For each damage pattern, high sensitivity towards local stiffness is achieved. Additionally, the damage position indicators exhibit a clear decreasing trend as the distance from the damage increases. The autoencoders presented here with non-standardized time series and covariance-based evaluation of residuals lead to increased robustness and sensitivity regarding damage localization.

AB - In this paper, an autoencoder trained with non-standardized time series data and evaluated using covariance-based residuals for generally applicable unsupervised damage localization is investigated. Raw acceleration time series are used as the inputs for the autoencoder to give both these features: no loss of information and exploitation of the full potential of the neural network. When it comes to output-only and unsupervised structural health monitoring (SHM), data-driven models struggle to localize the positions of damage adequately or only work well in a small range of applications. Regarding neural networks, expertise is needed for the neural network dimensioning and understanding of structural dynamics, which increases the difficulty of the task. In order to simplify the process, an automated solution is provided to perform the neural architecture search, and principal component analysis (PCA) is used to find a good choice for the bottleneck dimension. As an extension of the model, the residuals between the original and reconstructed time series are evaluated using the covariance between each input signal and each residual time series, which results in improved indicators for damage localization. We demonstrate the efficiency of the proposed schemes for damage analysis in a series of simulations using a three-mass swinger, in which the autoencoder can localize the damage using varying excitation locations. The covariances’ evaluation indicates that they are more potent than using the reconstruction error. Finally, experimental validation is conducted using vibration test data from a lattice tower called Leibniz University Structure for Monitoring (LUMO) under ambient excitation. For each damage pattern, high sensitivity towards local stiffness is achieved. Additionally, the damage position indicators exhibit a clear decreasing trend as the distance from the damage increases. The autoencoders presented here with non-standardized time series and covariance-based evaluation of residuals lead to increased robustness and sensitivity regarding damage localization.

KW - Autoencoder

KW - Data-driven model

KW - PCA

KW - Structural health monitoring

KW - Unsupervised damage localization

UR - http://www.scopus.com/inward/record.url?scp=85183452721&partnerID=8YFLogxK

U2 - 10.1016/j.engstruct.2024.117570

DO - 10.1016/j.engstruct.2024.117570

M3 - Article

AN - SCOPUS:85183452721

VL - 303

JO - Engineering structures

JF - Engineering structures

SN - 0141-0296

M1 - 117570

ER -

By the same author(s)