Details
| Original language | English |
|---|---|
| Title of host publication | AIAA SCITECH 2023 Forum |
| Publisher | American Institute of Aeronautics and Astronautics Inc. (AIAA) |
| ISBN (print) | 9781624106996 |
| Publication status | Published - 2023 |
| Event | AIAA SciTech Forum and Exposition, 2023 - Orlando, United States Duration: 23 Jan 2023 → 27 Jan 2023 |
Abstract
Short glass fiber-reinforced adhesives are state-of-the-art materials used in bond lines of wind turbine blades. Various alignments of the short fibers are emerging which depend on the adhesive flow during the application and joining process. This induces a spectrum of directiondependent mechanical properties. The tensile strength, for instance, can vary by about 20 % depending on the load direction. Therefore the adhesive performance, which is normally determined under controlled laboratory conditions and implemented in bond line design routines, can deviate from the in-situ application. This work investigates the effect of the short fiber alignment on the tensile strength distribution for an industry-standard adhesive system used in wind turbine rotor blades. The smeared short fiber orientation of the tensile specimens tested is estimated locally near the damaged surface by means of a material model. The model is fed with standard thermomechanical measurements (TMA) and calibrated via micro-CT analysis. A linear correlation between tensile strength and short fiber alignment has been identified. The material model proposed augments the identification of the upper and lower material strength limits for bond line design purposes.
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
AIAA SCITECH 2023 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), 2023.
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - On the Estimation of Short Fiber Orientation in a Filled Epoxy Adhesive and its Effect on the Tensile Strength
AU - Holst, T.
AU - Antoniou, A.
AU - Englisch, N.
AU - Manousides, N.
AU - Balzani, C.
N1 - Publisher Copyright: © 2023, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.
PY - 2023
Y1 - 2023
N2 - Short glass fiber-reinforced adhesives are state-of-the-art materials used in bond lines of wind turbine blades. Various alignments of the short fibers are emerging which depend on the adhesive flow during the application and joining process. This induces a spectrum of directiondependent mechanical properties. The tensile strength, for instance, can vary by about 20 % depending on the load direction. Therefore the adhesive performance, which is normally determined under controlled laboratory conditions and implemented in bond line design routines, can deviate from the in-situ application. This work investigates the effect of the short fiber alignment on the tensile strength distribution for an industry-standard adhesive system used in wind turbine rotor blades. The smeared short fiber orientation of the tensile specimens tested is estimated locally near the damaged surface by means of a material model. The model is fed with standard thermomechanical measurements (TMA) and calibrated via micro-CT analysis. A linear correlation between tensile strength and short fiber alignment has been identified. The material model proposed augments the identification of the upper and lower material strength limits for bond line design purposes.
AB - Short glass fiber-reinforced adhesives are state-of-the-art materials used in bond lines of wind turbine blades. Various alignments of the short fibers are emerging which depend on the adhesive flow during the application and joining process. This induces a spectrum of directiondependent mechanical properties. The tensile strength, for instance, can vary by about 20 % depending on the load direction. Therefore the adhesive performance, which is normally determined under controlled laboratory conditions and implemented in bond line design routines, can deviate from the in-situ application. This work investigates the effect of the short fiber alignment on the tensile strength distribution for an industry-standard adhesive system used in wind turbine rotor blades. The smeared short fiber orientation of the tensile specimens tested is estimated locally near the damaged surface by means of a material model. The model is fed with standard thermomechanical measurements (TMA) and calibrated via micro-CT analysis. A linear correlation between tensile strength and short fiber alignment has been identified. The material model proposed augments the identification of the upper and lower material strength limits for bond line design purposes.
UR - http://www.scopus.com/inward/record.url?scp=85200115005&partnerID=8YFLogxK
U2 - 10.2514/6.2023-1922
DO - 10.2514/6.2023-1922
M3 - Conference contribution
AN - SCOPUS:85200115005
SN - 9781624106996
BT - AIAA SCITECH 2023 Forum
PB - American Institute of Aeronautics and Astronautics Inc. (AIAA)
T2 - AIAA SciTech Forum and Exposition, 2023
Y2 - 23 January 2023 through 27 January 2023
ER -