Details
| Original language | English |
|---|---|
| Title of host publication | 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019 |
| Subtitle of host publication | Proceedings |
| Editors | S. Shaposhnikov |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Pages | 606-608 |
| Number of pages | 3 |
| ISBN (electronic) | 978-1-7281-0339-6 |
| ISBN (print) | 978-1-7281-0340-2 |
| Publication status | Published - 28 Feb 2019 |
| Event | 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019 - Saint Petersburg and Moscow, Russian Federation Duration: 28 Jan 2019 → 30 Jan 2019 |
Publication series
| Name | IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference |
|---|---|
| ISSN (Print) | 2376-6557 |
| ISSN (electronic) | 2376-6565 |
Abstract
This paper describes the numerical simulation of the induction system for a steel disk heating. Problem-oriented 3D models for the calculation of coupled electromagnetic and thermal tasks were developed by ANSYS. Electromagnetic and thermal processes were investigated by heating the rotated disk-shaped workpiece, which is partially located in the inductor. Further prospects of developed models were connected with the research of different induction systems for the different shaped workpieces heating. Also developed methods and approaches could be applied for other electrotechnological processes such as hardening, annealing, preheating, post heating and summarized of the offered solution for all steel rings, disks, gears, shafts, springs and other symmetrical workpieces. Using the model, electrothermal problems for designing induction installations and parametric search for optimal system configurations were analyzed and investigated.
Keywords
- Disk heating, Induction heating, Numerical simulation
ASJC Scopus subject areas
- Engineering(all)
- Electrical and Electronic Engineering
- Engineering(all)
- Safety, Risk, Reliability and Quality
- Materials Science(all)
- Electronic, Optical and Magnetic Materials
- Physics and Astronomy(all)
- Instrumentation
- Physics and Astronomy(all)
- Radiation
- Computer Science(all)
- Computer Networks and Communications
- Computer Science(all)
- Hardware and Architecture
- Energy(all)
- Energy Engineering and Power Technology
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019: Proceedings. ed. / S. Shaposhnikov. Institute of Electrical and Electronics Engineers Inc., 2019. p. 606-608 8656912 (IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - Numerical simulation, investigation and development of induction systems for heating of disks with complex profile
AU - Mannanov, Emil
AU - Galunin, Sergei
AU - Yermekova, Madina
AU - Nacke, Bernard
AU - Nikanorov, Alexandre
PY - 2019/2/28
Y1 - 2019/2/28
N2 - This paper describes the numerical simulation of the induction system for a steel disk heating. Problem-oriented 3D models for the calculation of coupled electromagnetic and thermal tasks were developed by ANSYS. Electromagnetic and thermal processes were investigated by heating the rotated disk-shaped workpiece, which is partially located in the inductor. Further prospects of developed models were connected with the research of different induction systems for the different shaped workpieces heating. Also developed methods and approaches could be applied for other electrotechnological processes such as hardening, annealing, preheating, post heating and summarized of the offered solution for all steel rings, disks, gears, shafts, springs and other symmetrical workpieces. Using the model, electrothermal problems for designing induction installations and parametric search for optimal system configurations were analyzed and investigated.
AB - This paper describes the numerical simulation of the induction system for a steel disk heating. Problem-oriented 3D models for the calculation of coupled electromagnetic and thermal tasks were developed by ANSYS. Electromagnetic and thermal processes were investigated by heating the rotated disk-shaped workpiece, which is partially located in the inductor. Further prospects of developed models were connected with the research of different induction systems for the different shaped workpieces heating. Also developed methods and approaches could be applied for other electrotechnological processes such as hardening, annealing, preheating, post heating and summarized of the offered solution for all steel rings, disks, gears, shafts, springs and other symmetrical workpieces. Using the model, electrothermal problems for designing induction installations and parametric search for optimal system configurations were analyzed and investigated.
KW - Disk heating
KW - Induction heating
KW - Numerical simulation
UR - http://www.scopus.com/inward/record.url?scp=85063456744&partnerID=8YFLogxK
U2 - 10.1109/eiconrus.2019.8656912
DO - 10.1109/eiconrus.2019.8656912
M3 - Conference contribution
AN - SCOPUS:85063456744
SN - 978-1-7281-0340-2
T3 - IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference
SP - 606
EP - 608
BT - 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019
A2 - Shaposhnikov, S.
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019
Y2 - 28 January 2019 through 30 January 2019
ER -