Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

Research output: Contribution to journalArticleResearchpeer review

Authors

  • H. E. Karaca
  • E. Acar
  • G. S. Ded
  • S. M. Saghaian
  • B. Basaran
  • H. Tobe
  • M. Kok
  • H. J. Maier
  • R. D. Noebe
  • Y. I. Chumlyakov

Research Organisations

External Research Organisations

  • University of Kentucky
  • Erciyes University
  • Firat University
  • NASA Glenn Research Center
  • Tomsk State University
View graph of relations

Details

Original languageEnglish
Pages (from-to)82-94
Number of pages13
JournalMaterials Science and Engineering A
Volume627
Publication statusPublished - 6 Jan 2015

Abstract

Effects of heat treatment temperature and time on the microstructure and shape memory behaviors (e.g. transformation temperatures, load-biased shape memory effect, superelasticity, two-way shape memory effect, and related properties) were investigated in a Ni45.3Ti29.7Hf20Cu5 (at%) high temperature polycrystalline shape memory alloy. Heat treatments could be used to control the TTs and to a lesser extent recoverable and irrecoverable strains. The Ni45.3Ti29.7Hf20Cu5 alloy was capable of recovering shape memory strains of up to 2% at temperatures above 100°C under high compressive stresses (700MPa) and up to 0.8% TWSME strain was possible after a non-intense stress-cycling training process. However, due to high Clausius-Clapeyron slopes, large temperature hysteresis, and a strong dependence of transformation stress on temperature, fully recoverable superelastic behavior was not observed because plastic deformation occurred concurrently with the stress-induced martensitic transformation.

Keywords

    NiTiHfCu alloys, Phase transformation, Shape memory alloys, Shape memory effect, TWSME

ASJC Scopus subject areas

Cite this

Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy. / Karaca, H. E.; Acar, E.; Ded, G. S. et al.
In: Materials Science and Engineering A, Vol. 627, 06.01.2015, p. 82-94.

Research output: Contribution to journalArticleResearchpeer review

Karaca, H. E., Acar, E., Ded, G. S., Saghaian, S. M., Basaran, B., Tobe, H., Kok, M., Maier, H. J., Noebe, R. D., & Chumlyakov, Y. I. (2015). Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy. Materials Science and Engineering A, 627, 82-94. https://doi.org/10.1016/j.msea.2014.12.111
Karaca HE, Acar E, Ded GS, Saghaian SM, Basaran B, Tobe H et al. Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy. Materials Science and Engineering A. 2015 Jan 6;627:82-94. doi: 10.1016/j.msea.2014.12.111
Download
@article{08d6989770c34c7d8435140fe00cd2f3,
title = "Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy",
abstract = "Effects of heat treatment temperature and time on the microstructure and shape memory behaviors (e.g. transformation temperatures, load-biased shape memory effect, superelasticity, two-way shape memory effect, and related properties) were investigated in a Ni45.3Ti29.7Hf20Cu5 (at%) high temperature polycrystalline shape memory alloy. Heat treatments could be used to control the TTs and to a lesser extent recoverable and irrecoverable strains. The Ni45.3Ti29.7Hf20Cu5 alloy was capable of recovering shape memory strains of up to 2% at temperatures above 100°C under high compressive stresses (700MPa) and up to 0.8% TWSME strain was possible after a non-intense stress-cycling training process. However, due to high Clausius-Clapeyron slopes, large temperature hysteresis, and a strong dependence of transformation stress on temperature, fully recoverable superelastic behavior was not observed because plastic deformation occurred concurrently with the stress-induced martensitic transformation.",
keywords = "NiTiHfCu alloys, Phase transformation, Shape memory alloys, Shape memory effect, TWSME",
author = "Karaca, {H. E.} and E. Acar and Ded, {G. S.} and Saghaian, {S. M.} and B. Basaran and H. Tobe and M. Kok and Maier, {H. J.} and Noebe, {R. D.} and Chumlyakov, {Y. I.}",
note = "Funding information: This work was supported in part by the NASA Fundamental Aeronautics Program, and Aeronautical Sciences and Transformational Tools & Technologies Projects (Technical Discipline Lead Dale Hopkins), the NASA EPSCOR program under Grant NNX11AQ31A , the NASA Kentucky Space Grant Consortium 516171-10-165 and RSF Grant 14-29-00012 . HJM acknowledges financial support from Deutsche Forschungsgemeinschaft ( FOR 1766 ).",
year = "2015",
month = jan,
day = "6",
doi = "10.1016/j.msea.2014.12.111",
language = "English",
volume = "627",
pages = "82--94",
journal = "Materials Science and Engineering A",
issn = "0921-5093",
publisher = "Elsevier BV",

}

Download

TY - JOUR

T1 - Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

AU - Karaca, H. E.

AU - Acar, E.

AU - Ded, G. S.

AU - Saghaian, S. M.

AU - Basaran, B.

AU - Tobe, H.

AU - Kok, M.

AU - Maier, H. J.

AU - Noebe, R. D.

AU - Chumlyakov, Y. I.

N1 - Funding information: This work was supported in part by the NASA Fundamental Aeronautics Program, and Aeronautical Sciences and Transformational Tools & Technologies Projects (Technical Discipline Lead Dale Hopkins), the NASA EPSCOR program under Grant NNX11AQ31A , the NASA Kentucky Space Grant Consortium 516171-10-165 and RSF Grant 14-29-00012 . HJM acknowledges financial support from Deutsche Forschungsgemeinschaft ( FOR 1766 ).

PY - 2015/1/6

Y1 - 2015/1/6

N2 - Effects of heat treatment temperature and time on the microstructure and shape memory behaviors (e.g. transformation temperatures, load-biased shape memory effect, superelasticity, two-way shape memory effect, and related properties) were investigated in a Ni45.3Ti29.7Hf20Cu5 (at%) high temperature polycrystalline shape memory alloy. Heat treatments could be used to control the TTs and to a lesser extent recoverable and irrecoverable strains. The Ni45.3Ti29.7Hf20Cu5 alloy was capable of recovering shape memory strains of up to 2% at temperatures above 100°C under high compressive stresses (700MPa) and up to 0.8% TWSME strain was possible after a non-intense stress-cycling training process. However, due to high Clausius-Clapeyron slopes, large temperature hysteresis, and a strong dependence of transformation stress on temperature, fully recoverable superelastic behavior was not observed because plastic deformation occurred concurrently with the stress-induced martensitic transformation.

AB - Effects of heat treatment temperature and time on the microstructure and shape memory behaviors (e.g. transformation temperatures, load-biased shape memory effect, superelasticity, two-way shape memory effect, and related properties) were investigated in a Ni45.3Ti29.7Hf20Cu5 (at%) high temperature polycrystalline shape memory alloy. Heat treatments could be used to control the TTs and to a lesser extent recoverable and irrecoverable strains. The Ni45.3Ti29.7Hf20Cu5 alloy was capable of recovering shape memory strains of up to 2% at temperatures above 100°C under high compressive stresses (700MPa) and up to 0.8% TWSME strain was possible after a non-intense stress-cycling training process. However, due to high Clausius-Clapeyron slopes, large temperature hysteresis, and a strong dependence of transformation stress on temperature, fully recoverable superelastic behavior was not observed because plastic deformation occurred concurrently with the stress-induced martensitic transformation.

KW - NiTiHfCu alloys

KW - Phase transformation

KW - Shape memory alloys

KW - Shape memory effect

KW - TWSME

UR - http://www.scopus.com/inward/record.url?scp=84921315865&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2014.12.111

DO - 10.1016/j.msea.2014.12.111

M3 - Article

AN - SCOPUS:84921315865

VL - 627

SP - 82

EP - 94

JO - Materials Science and Engineering A

JF - Materials Science and Engineering A

SN - 0921-5093

ER -

By the same author(s)