Measurement and characterisation of microstructures made by cutting processes

Research output: Chapter in book/report/conference proceedingConference contributionResearchpeer review

Authors

View graph of relations

Details

Original languageEnglish
Title of host publicationProceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009
EditorsHendrik Van Brussel, Theresa Burke, H. Spaan, E. Brinksmeier, Theresa Burke, Theresa Burke
Pages223-226
Number of pages4
ISBN (electronic)9780955308260
Publication statusPublished - 2009
Event9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009 - San Sebastian, Spain
Duration: 2 Jun 20095 Jun 2009

Publication series

NameProceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009
Volume2

Abstract

Modifying highly loaded surfaces of cylinders of piston engines is a method of minimizing wear and friction. There already exist coatings like ALUSIL which are used in the cylinders of some BMW and Porsche engines. The advantages of these coatings are very hard silicon particles that protrude from the aluminium matrix in which the silicon is embedded. Below the silicon particles is volume to store oil, improving the tribological performance. Another new method of modifying a surface for this purpose is a special cutting process that can produce structures with a scale from few micrometers to some millimetres.

ASJC Scopus subject areas

Cite this

Measurement and characterisation of microstructures made by cutting processes. / Bretschneider, M.; Kästner, M.; Reithmeier, E.
Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. ed. / Hendrik Van Brussel; Theresa Burke; H. Spaan; E. Brinksmeier; Theresa Burke; Theresa Burke. 2009. p. 223-226 (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; Vol. 2).

Research output: Chapter in book/report/conference proceedingConference contributionResearchpeer review

Bretschneider, M, Kästner, M & Reithmeier, E 2009, Measurement and characterisation of microstructures made by cutting processes. in H Van Brussel, T Burke, H Spaan, E Brinksmeier, T Burke & T Burke (eds), Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, vol. 2, pp. 223-226, 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, San Sebastian, Spain, 2 Jun 2009.
Bretschneider, M., Kästner, M., & Reithmeier, E. (2009). Measurement and characterisation of microstructures made by cutting processes. In H. Van Brussel, T. Burke, H. Spaan, E. Brinksmeier, T. Burke, & T. Burke (Eds.), Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009 (pp. 223-226). (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; Vol. 2).
Bretschneider M, Kästner M, Reithmeier E. Measurement and characterisation of microstructures made by cutting processes. In Van Brussel H, Burke T, Spaan H, Brinksmeier E, Burke T, Burke T, editors, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. 2009. p. 223-226. (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009).
Bretschneider, M. ; Kästner, M. ; Reithmeier, E. / Measurement and characterisation of microstructures made by cutting processes. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. editor / Hendrik Van Brussel ; Theresa Burke ; H. Spaan ; E. Brinksmeier ; Theresa Burke ; Theresa Burke. 2009. pp. 223-226 (Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009).
Download
@inproceedings{3762a0e728744cb8af15e8e392e3acf4,
title = "Measurement and characterisation of microstructures made by cutting processes",
abstract = "Modifying highly loaded surfaces of cylinders of piston engines is a method of minimizing wear and friction. There already exist coatings like ALUSIL which are used in the cylinders of some BMW and Porsche engines. The advantages of these coatings are very hard silicon particles that protrude from the aluminium matrix in which the silicon is embedded. Below the silicon particles is volume to store oil, improving the tribological performance. Another new method of modifying a surface for this purpose is a special cutting process that can produce structures with a scale from few micrometers to some millimetres.",
author = "M. Bretschneider and M. K{\"a}stner and E. Reithmeier",
year = "2009",
language = "English",
series = "Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009",
pages = "223--226",
editor = "{Van Brussel}, Hendrik and Theresa Burke and H. Spaan and E. Brinksmeier and Theresa Burke and Theresa Burke",
booktitle = "Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009",
note = "9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009 ; Conference date: 02-06-2009 Through 05-06-2009",

}

Download

TY - GEN

T1 - Measurement and characterisation of microstructures made by cutting processes

AU - Bretschneider, M.

AU - Kästner, M.

AU - Reithmeier, E.

PY - 2009

Y1 - 2009

N2 - Modifying highly loaded surfaces of cylinders of piston engines is a method of minimizing wear and friction. There already exist coatings like ALUSIL which are used in the cylinders of some BMW and Porsche engines. The advantages of these coatings are very hard silicon particles that protrude from the aluminium matrix in which the silicon is embedded. Below the silicon particles is volume to store oil, improving the tribological performance. Another new method of modifying a surface for this purpose is a special cutting process that can produce structures with a scale from few micrometers to some millimetres.

AB - Modifying highly loaded surfaces of cylinders of piston engines is a method of minimizing wear and friction. There already exist coatings like ALUSIL which are used in the cylinders of some BMW and Porsche engines. The advantages of these coatings are very hard silicon particles that protrude from the aluminium matrix in which the silicon is embedded. Below the silicon particles is volume to store oil, improving the tribological performance. Another new method of modifying a surface for this purpose is a special cutting process that can produce structures with a scale from few micrometers to some millimetres.

UR - http://www.scopus.com/inward/record.url?scp=84871579529&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84871579529

T3 - Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009

SP - 223

EP - 226

BT - Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009

A2 - Van Brussel, Hendrik

A2 - Burke, Theresa

A2 - Spaan, H.

A2 - Brinksmeier, E.

A2 - Burke, Theresa

A2 - Burke, Theresa

T2 - 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009

Y2 - 2 June 2009 through 5 June 2009

ER -

By the same author(s)