Details
| Original language | English |
|---|---|
| Title of host publication | Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004 |
| Place of Publication | Limassol |
| Pages | 77-88 |
| Number of pages | 12 |
| Publication status | Published - 2004 |
| Event | 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004 - Limassol, Cyprus Duration: 21 Sept 2004 → 23 Sept 2004 |
Abstract
Thixoforming or semi-solid-metal forming is a steadily growing alternative production technique to conventional processes such as casting or forging. The main advantages of this technique are the feasibility of production of complex part geometries in combination with a high dimensional accuracy (near net shape). Unlike for alloys with a low melting point - e.g. aluminum - the thixoforming of steel alloys causes still many technological problems that make an industrial application of this technique more difficult. For example, it is hard to find tool materials that withstand the thermal and thermo-shock stresses. Furthermore, the conduction of the whole process requires a high accuracy and reproducibility. In order to overcome these problems the thixoforging process chain is subject of research work at the IFUM. This paper gives an overview about the progress of setting-up a production line that shows the principle feasibility to establish the thixoforming technology for mass-production of industrial relevant parts. The thixotropic behavior of steel can only be obtained in a rather narrow temperature window at a temperature level between the solidus and liquidus temperature. In the introduced production line a computerized process control of the inductive heating process allows the precise setting of the desired temperature. This control system was developed on the basis of simulation and experimental work. In order to avoid oxidation and premature cooling of the parts the handling is done using ceramic transport containers with an inert gas atmosphere inside. Due to the low heat conductivity of the ceramic it is assured that the loss of temperature of the billet will be tolerable. The billet is placed automatically in a previously closed die and formed immediately. The path of the forming force is optimized in order to obtain a good die filling behavior and a pore-free microstructure. After the forming step the die opens and the thixoforged part is ejected and taken away also automatically. The die consists of a ceramic inlay that is armored with steel rings to enable the necessary mechanical rigidity. The die is fed with hot slugs in closed state and can be opened completely to eject the part. The tool concept allows the controlling of its heat balance by means of auxiliary heating and cooling devices. This is an important feature in order to avoid thermal cracking of the ceramic inlay of the die. All steps of the production chain are carried out and controlled automatically. This is a necessary requirement to achieve reproducible and predictable results.
Keywords
- Process automation, Thixoforming, Thixotools
ASJC Scopus subject areas
- Engineering(all)
- General Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. Limassol, 2004. p. 77-88.
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - Introduction of a full automated process for the production of automotive steel parts
AU - Behrens, Bernd-Arno
AU - Fischer, Dirk
AU - Haller, Bjoern
AU - Rassili, Ahmed
AU - Klemm, Hagen
AU - Flüß, André
AU - Walkin, Bengt
AU - Karlsson, Mikael
AU - Robelet, Marc
AU - Cucatto, Alberto
PY - 2004
Y1 - 2004
N2 - Thixoforming or semi-solid-metal forming is a steadily growing alternative production technique to conventional processes such as casting or forging. The main advantages of this technique are the feasibility of production of complex part geometries in combination with a high dimensional accuracy (near net shape). Unlike for alloys with a low melting point - e.g. aluminum - the thixoforming of steel alloys causes still many technological problems that make an industrial application of this technique more difficult. For example, it is hard to find tool materials that withstand the thermal and thermo-shock stresses. Furthermore, the conduction of the whole process requires a high accuracy and reproducibility. In order to overcome these problems the thixoforging process chain is subject of research work at the IFUM. This paper gives an overview about the progress of setting-up a production line that shows the principle feasibility to establish the thixoforming technology for mass-production of industrial relevant parts. The thixotropic behavior of steel can only be obtained in a rather narrow temperature window at a temperature level between the solidus and liquidus temperature. In the introduced production line a computerized process control of the inductive heating process allows the precise setting of the desired temperature. This control system was developed on the basis of simulation and experimental work. In order to avoid oxidation and premature cooling of the parts the handling is done using ceramic transport containers with an inert gas atmosphere inside. Due to the low heat conductivity of the ceramic it is assured that the loss of temperature of the billet will be tolerable. The billet is placed automatically in a previously closed die and formed immediately. The path of the forming force is optimized in order to obtain a good die filling behavior and a pore-free microstructure. After the forming step the die opens and the thixoforged part is ejected and taken away also automatically. The die consists of a ceramic inlay that is armored with steel rings to enable the necessary mechanical rigidity. The die is fed with hot slugs in closed state and can be opened completely to eject the part. The tool concept allows the controlling of its heat balance by means of auxiliary heating and cooling devices. This is an important feature in order to avoid thermal cracking of the ceramic inlay of the die. All steps of the production chain are carried out and controlled automatically. This is a necessary requirement to achieve reproducible and predictable results.
AB - Thixoforming or semi-solid-metal forming is a steadily growing alternative production technique to conventional processes such as casting or forging. The main advantages of this technique are the feasibility of production of complex part geometries in combination with a high dimensional accuracy (near net shape). Unlike for alloys with a low melting point - e.g. aluminum - the thixoforming of steel alloys causes still many technological problems that make an industrial application of this technique more difficult. For example, it is hard to find tool materials that withstand the thermal and thermo-shock stresses. Furthermore, the conduction of the whole process requires a high accuracy and reproducibility. In order to overcome these problems the thixoforging process chain is subject of research work at the IFUM. This paper gives an overview about the progress of setting-up a production line that shows the principle feasibility to establish the thixoforming technology for mass-production of industrial relevant parts. The thixotropic behavior of steel can only be obtained in a rather narrow temperature window at a temperature level between the solidus and liquidus temperature. In the introduced production line a computerized process control of the inductive heating process allows the precise setting of the desired temperature. This control system was developed on the basis of simulation and experimental work. In order to avoid oxidation and premature cooling of the parts the handling is done using ceramic transport containers with an inert gas atmosphere inside. Due to the low heat conductivity of the ceramic it is assured that the loss of temperature of the billet will be tolerable. The billet is placed automatically in a previously closed die and formed immediately. The path of the forming force is optimized in order to obtain a good die filling behavior and a pore-free microstructure. After the forming step the die opens and the thixoforged part is ejected and taken away also automatically. The die consists of a ceramic inlay that is armored with steel rings to enable the necessary mechanical rigidity. The die is fed with hot slugs in closed state and can be opened completely to eject the part. The tool concept allows the controlling of its heat balance by means of auxiliary heating and cooling devices. This is an important feature in order to avoid thermal cracking of the ceramic inlay of the die. All steps of the production chain are carried out and controlled automatically. This is a necessary requirement to achieve reproducible and predictable results.
KW - Process automation
KW - Thixoforming
KW - Thixotools
UR - http://www.scopus.com/inward/record.url?scp=27944471487&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:27944471487
SP - 77
EP - 88
BT - Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004
CY - Limassol
T2 - 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004
Y2 - 21 September 2004 through 23 September 2004
ER -