Details
| Original language | English |
|---|---|
| Article number | 100949 |
| Journal | Materialia |
| Volume | 14 |
| Early online date | 7 Nov 2020 |
| Publication status | Published - Dec 2020 |
Abstract
Degradable bone substitutes like Mg-based alloys are promising due to their good osseointegration and biocompatibility. The objective of this study was to investigate the influence of additional coatings on the degradation behavior, osseointegration and gas release of 128 open porous scaffolds (Ø 4 mm, length 5 mm) of the magnesium alloy LAE442 (4 wt% Li, 4 wt% Al, 2 wt% rare earths). Along a base layer of MgF2 polylactide acid (PLA) or calcium phosphate (CaP) were applied. While the resorbable PLA was supposed to delay the magnesium degradation, the CaP should form a nutrient depot for growing bone. The control group consisted of 32 β-tricalcium phosphate (TCP) scaffolds. The scaffolds were inserted into the greater trochanter of 80 adult female ZiKa rabbits. X-ray and in vivo μCT scans were performed postoperatively at regular intervals of 6, 12, 24, 36 weeks. Gas accumulation, scaffold degradation and osseointegration were evaluated. In comparison, PLA-coated scaffolds degraded slightly slower, but had a significantly greater amount of gas in the medullary canal at weeks 2 and 4 compared to CaP-coated scaffolds. CaP-coated scaffolds showed better values for drill hole closure and a significantly higher number of bone-scaffold contacts from week 12 to 36 compared to PLA. Furthermore, CaP-coated scaffolds showed higher bone volume and more new formed bone trabeculae than PLA-coated scaffolds. In total, an additional coating with CaP seemed to be promising in improving the degradation resistance and osseointegration, when using biodegradable bone substitutes.
Keywords
- Coating, Magnesium alloy, Micro-tomography, Open porous scaffolds, Osseointegration, PLA/CaP
ASJC Scopus subject areas
- Materials Science(all)
- General Materials Science
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Materialia, Vol. 14, 100949, 12.2020.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Influence of coatings on degradation and osseointegration of open porous Mg scaffolds in vivo
AU - Witting, L. M.
AU - Waselau, A. C.
AU - Feichtner, F.
AU - Wurm, L.
AU - Julmi, S.
AU - Klose, C.
AU - Gartzke, A. K.
AU - Maier, H. J.
AU - Wriggers, P.
AU - Meyer-Lindenberg, A.
N1 - Funding Information: This research is financially supported by the German Research Foundation (DFG) within the project “Interfacial effects and integration behaviour of magnesium-based sponges as bioresorbable bone substitute material” (Grant No. 271761343 ). The authors thankfully appreciate the financial support. Special thanks to Beatrix Limmer for outstanding help with laboratory activities and her support with the evaluations.
PY - 2020/12
Y1 - 2020/12
N2 - Degradable bone substitutes like Mg-based alloys are promising due to their good osseointegration and biocompatibility. The objective of this study was to investigate the influence of additional coatings on the degradation behavior, osseointegration and gas release of 128 open porous scaffolds (Ø 4 mm, length 5 mm) of the magnesium alloy LAE442 (4 wt% Li, 4 wt% Al, 2 wt% rare earths). Along a base layer of MgF2 polylactide acid (PLA) or calcium phosphate (CaP) were applied. While the resorbable PLA was supposed to delay the magnesium degradation, the CaP should form a nutrient depot for growing bone. The control group consisted of 32 β-tricalcium phosphate (TCP) scaffolds. The scaffolds were inserted into the greater trochanter of 80 adult female ZiKa rabbits. X-ray and in vivo μCT scans were performed postoperatively at regular intervals of 6, 12, 24, 36 weeks. Gas accumulation, scaffold degradation and osseointegration were evaluated. In comparison, PLA-coated scaffolds degraded slightly slower, but had a significantly greater amount of gas in the medullary canal at weeks 2 and 4 compared to CaP-coated scaffolds. CaP-coated scaffolds showed better values for drill hole closure and a significantly higher number of bone-scaffold contacts from week 12 to 36 compared to PLA. Furthermore, CaP-coated scaffolds showed higher bone volume and more new formed bone trabeculae than PLA-coated scaffolds. In total, an additional coating with CaP seemed to be promising in improving the degradation resistance and osseointegration, when using biodegradable bone substitutes.
AB - Degradable bone substitutes like Mg-based alloys are promising due to their good osseointegration and biocompatibility. The objective of this study was to investigate the influence of additional coatings on the degradation behavior, osseointegration and gas release of 128 open porous scaffolds (Ø 4 mm, length 5 mm) of the magnesium alloy LAE442 (4 wt% Li, 4 wt% Al, 2 wt% rare earths). Along a base layer of MgF2 polylactide acid (PLA) or calcium phosphate (CaP) were applied. While the resorbable PLA was supposed to delay the magnesium degradation, the CaP should form a nutrient depot for growing bone. The control group consisted of 32 β-tricalcium phosphate (TCP) scaffolds. The scaffolds were inserted into the greater trochanter of 80 adult female ZiKa rabbits. X-ray and in vivo μCT scans were performed postoperatively at regular intervals of 6, 12, 24, 36 weeks. Gas accumulation, scaffold degradation and osseointegration were evaluated. In comparison, PLA-coated scaffolds degraded slightly slower, but had a significantly greater amount of gas in the medullary canal at weeks 2 and 4 compared to CaP-coated scaffolds. CaP-coated scaffolds showed better values for drill hole closure and a significantly higher number of bone-scaffold contacts from week 12 to 36 compared to PLA. Furthermore, CaP-coated scaffolds showed higher bone volume and more new formed bone trabeculae than PLA-coated scaffolds. In total, an additional coating with CaP seemed to be promising in improving the degradation resistance and osseointegration, when using biodegradable bone substitutes.
KW - Coating
KW - Magnesium alloy
KW - Micro-tomography
KW - Open porous scaffolds
KW - Osseointegration
KW - PLA/CaP
UR - http://www.scopus.com/inward/record.url?scp=85096162412&partnerID=8YFLogxK
U2 - 10.1016/j.mtla.2020.100949
DO - 10.1016/j.mtla.2020.100949
M3 - Article
AN - SCOPUS:85096162412
VL - 14
JO - Materialia
JF - Materialia
SN - 2589-1529
M1 - 100949
ER -