Details
| Original language | English |
|---|---|
| Pages (from-to) | 1447-1458 |
| Number of pages | 12 |
| Journal | Journal of Analytical Atomic Spectrometry |
| Volume | 34 |
| Issue number | 7 |
| Early online date | 22 May 2019 |
| Publication status | Published - Jul 2019 |
Abstract
In this study we have established a new method for in situ measurements of stable lithium (Li) isotope ratios at low Li concentration levels using UV-femtosecond laser ablation coupled with multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS). Highly precise in situ determination of Li isotope ratios is challenging due to low Li concentrations in most natural minerals and matrix effects typically occurring during the ablation process and in the ion source. Here we demonstrate that matrix-dependent isotope effects in the plasma can be largely suppressed by operating the plasma under cool conditions (900 W) and a laser beam which is focused ∼130 μm below the sample surface. Under such conditions, precise and accurate measurements of δ7Li with ∼2‰ (2σ) analytical uncertainty have been performed for various glass reference materials and olivine. Depending on the Li concentration of the investigated samples, detector combinations have been optimized in order to achieve the best precision. At Li concentrations ranging from 2 to 10 μg g-1 a combination of an ion counter for the determination of 6Li and a Faraday cup equipped with a 1013 Ω amplifier for 7Li has yielded the best precision. For Li concentrations > 10 μg g-1, Faraday cups equipped with a 1013 Ω amplifier for 6Li and a 1011 Ω amplifier for 7Li are recommended. Measurements applying a 1013 Ω amplifier require a tau correction due to the slower signal response of the amplifier. The accuracy of the here-established LA-MC-ICP-MS method was tested by comparing the results obtained for reference glasses that have been analyzed both in situ and with solution MC-ICP-MS (or other conventional methods, previously applied in other studies), and the results are overall in good agreement. The applicability to a zoned olivine phenocryst from the Massif Central volcanic region has been tested successfully.
ASJC Scopus subject areas
- Chemistry(all)
- Analytical Chemistry
- Chemistry(all)
- Spectroscopy
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Journal of Analytical Atomic Spectrometry, Vol. 34, No. 7, 07.2019, p. 1447-1458.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - In situ high-precision lithium isotope analyses at low concentration levels with femtosecond-LA-MC-ICP-MS
AU - Steinmann, Lena K.
AU - Oeser, Martin
AU - Horn, Ingo
AU - Seitz, Hans Michael
AU - Weyer, Stefan
N1 - Funding information: Special thanks go to Klaus Peter Jochum and Brigitte Stoll (Max-Planck-Institut fr Chemie, Mainz) for providing a batch of MPI DING reference glasses. We also thank Julian Feige and Andreas Reimer for sample preparation and sample holder preparation, respectively. Constructive comments of two anonymous reviewers helped to improve the manuscript. This study was supported by the Deutsche Forschungsgemeinschaft (grant # OE 653/1-1). Special thanks go to Klaus Peter Jochum and Brigitte Stoll (Max-Planck-Institut für Chemie, Mainz) for providing a batch of MPI DING reference glasses. We also thank Julian Feige and Andreas Reimer for sample preparation and sample holder preparation, respectively. Constructive comments of two anonymous reviewers helped to improve the manuscript. This study was supported by the Deutsche Forschungsgemeinscha (grant # OE 653/1-1).
PY - 2019/7
Y1 - 2019/7
N2 - In this study we have established a new method for in situ measurements of stable lithium (Li) isotope ratios at low Li concentration levels using UV-femtosecond laser ablation coupled with multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS). Highly precise in situ determination of Li isotope ratios is challenging due to low Li concentrations in most natural minerals and matrix effects typically occurring during the ablation process and in the ion source. Here we demonstrate that matrix-dependent isotope effects in the plasma can be largely suppressed by operating the plasma under cool conditions (900 W) and a laser beam which is focused ∼130 μm below the sample surface. Under such conditions, precise and accurate measurements of δ7Li with ∼2‰ (2σ) analytical uncertainty have been performed for various glass reference materials and olivine. Depending on the Li concentration of the investigated samples, detector combinations have been optimized in order to achieve the best precision. At Li concentrations ranging from 2 to 10 μg g-1 a combination of an ion counter for the determination of 6Li and a Faraday cup equipped with a 1013 Ω amplifier for 7Li has yielded the best precision. For Li concentrations > 10 μg g-1, Faraday cups equipped with a 1013 Ω amplifier for 6Li and a 1011 Ω amplifier for 7Li are recommended. Measurements applying a 1013 Ω amplifier require a tau correction due to the slower signal response of the amplifier. The accuracy of the here-established LA-MC-ICP-MS method was tested by comparing the results obtained for reference glasses that have been analyzed both in situ and with solution MC-ICP-MS (or other conventional methods, previously applied in other studies), and the results are overall in good agreement. The applicability to a zoned olivine phenocryst from the Massif Central volcanic region has been tested successfully.
AB - In this study we have established a new method for in situ measurements of stable lithium (Li) isotope ratios at low Li concentration levels using UV-femtosecond laser ablation coupled with multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS). Highly precise in situ determination of Li isotope ratios is challenging due to low Li concentrations in most natural minerals and matrix effects typically occurring during the ablation process and in the ion source. Here we demonstrate that matrix-dependent isotope effects in the plasma can be largely suppressed by operating the plasma under cool conditions (900 W) and a laser beam which is focused ∼130 μm below the sample surface. Under such conditions, precise and accurate measurements of δ7Li with ∼2‰ (2σ) analytical uncertainty have been performed for various glass reference materials and olivine. Depending on the Li concentration of the investigated samples, detector combinations have been optimized in order to achieve the best precision. At Li concentrations ranging from 2 to 10 μg g-1 a combination of an ion counter for the determination of 6Li and a Faraday cup equipped with a 1013 Ω amplifier for 7Li has yielded the best precision. For Li concentrations > 10 μg g-1, Faraday cups equipped with a 1013 Ω amplifier for 6Li and a 1011 Ω amplifier for 7Li are recommended. Measurements applying a 1013 Ω amplifier require a tau correction due to the slower signal response of the amplifier. The accuracy of the here-established LA-MC-ICP-MS method was tested by comparing the results obtained for reference glasses that have been analyzed both in situ and with solution MC-ICP-MS (or other conventional methods, previously applied in other studies), and the results are overall in good agreement. The applicability to a zoned olivine phenocryst from the Massif Central volcanic region has been tested successfully.
UR - http://www.scopus.com/inward/record.url?scp=85068453828&partnerID=8YFLogxK
U2 - 10.1039/c9ja00088g
DO - 10.1039/c9ja00088g
M3 - Article
AN - SCOPUS:85068453828
VL - 34
SP - 1447
EP - 1458
JO - Journal of Analytical Atomic Spectrometry
JF - Journal of Analytical Atomic Spectrometry
SN - 0267-9477
IS - 7
ER -