Details
Original language | English |
---|---|
Pages (from-to) | 64-75 |
Number of pages | 12 |
Journal | WIND ENERGY |
Volume | 26 |
Issue number | 1 |
Early online date | 18 Oct 2022 |
Publication status | Published - 15 Dec 2022 |
Abstract
Active trailing-edge technology is a promising application for localized load alleviation of large-diameter wind turbine rotors, accomplished using one or more control surfaces in the rotor blade's outer region. This work focuses on identifying noise contributions from the flap side-edge and the trailing edge in a laboratory condition. Measurements were conducted in the Acoustic Wind Tunnel Braunschweig (AWB) at the German Aerospace Center's (DLR) Braunschweig site. The small-scale model has a span of 1,200 mm and a chord length of 300 mm. The control surface, a plain flap, has a span of 400 mm and a chord length of 90 mm. Far-field noise was measured using a phased-microphone array for various flow speeds, angles of attack, and flap deflection angles. Due to the size of the model and assumed closeness of the sound sources, two noise reduction addons were installed interchangeably: trailing-edge brush and flap side-edge porous foam for sound source identification. Analysis of the far-field noise reveals that, while changes to the flap deflection angle alter the far-field noise spectra, the trailing-edge noise remains the predominant noise source at deflection angles (Formula presented.) and (Formula presented.). No additional noise level was observed from the flap side edge within the measurable frequency range at these angles. The flap side-edge noise has an increased role for frequency larger than 2 kHz for the larger flap deflection angles of (Formula presented.) and (Formula presented.).
ASJC Scopus subject areas
Sustainable Development Goals
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: WIND ENERGY, Vol. 26, No. 1, 15.12.2022, p. 64-75.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Identifying the flap side-edge noise contribution of a wind turbine blade section with an adaptive trailing edge
AU - Suryadi, A.
AU - Jätz, C.
AU - Seume, J. R.
AU - Herr, M.
N1 - Funding Information: The authors' are grateful to Jörn Tychsen (TU Braunschweig) for providing the porous foam materials and to Karl‐Stéphane Rossignol (DLR) for his work in calibrating the phased‐microphone array. This study, part of the project SmartBlades 2.0, was funded by the German Ministry for Economic Affairs and Energy (BMWi). Open Access funding enabled and organized by Projekt DEAL. WOA Institution: DEUTSCHES ZENTRUM FUR LUFT UND RAUMFAHRT Consortia Name: Projekt DEAL
PY - 2022/12/15
Y1 - 2022/12/15
N2 - Active trailing-edge technology is a promising application for localized load alleviation of large-diameter wind turbine rotors, accomplished using one or more control surfaces in the rotor blade's outer region. This work focuses on identifying noise contributions from the flap side-edge and the trailing edge in a laboratory condition. Measurements were conducted in the Acoustic Wind Tunnel Braunschweig (AWB) at the German Aerospace Center's (DLR) Braunschweig site. The small-scale model has a span of 1,200 mm and a chord length of 300 mm. The control surface, a plain flap, has a span of 400 mm and a chord length of 90 mm. Far-field noise was measured using a phased-microphone array for various flow speeds, angles of attack, and flap deflection angles. Due to the size of the model and assumed closeness of the sound sources, two noise reduction addons were installed interchangeably: trailing-edge brush and flap side-edge porous foam for sound source identification. Analysis of the far-field noise reveals that, while changes to the flap deflection angle alter the far-field noise spectra, the trailing-edge noise remains the predominant noise source at deflection angles (Formula presented.) and (Formula presented.). No additional noise level was observed from the flap side edge within the measurable frequency range at these angles. The flap side-edge noise has an increased role for frequency larger than 2 kHz for the larger flap deflection angles of (Formula presented.) and (Formula presented.).
AB - Active trailing-edge technology is a promising application for localized load alleviation of large-diameter wind turbine rotors, accomplished using one or more control surfaces in the rotor blade's outer region. This work focuses on identifying noise contributions from the flap side-edge and the trailing edge in a laboratory condition. Measurements were conducted in the Acoustic Wind Tunnel Braunschweig (AWB) at the German Aerospace Center's (DLR) Braunschweig site. The small-scale model has a span of 1,200 mm and a chord length of 300 mm. The control surface, a plain flap, has a span of 400 mm and a chord length of 90 mm. Far-field noise was measured using a phased-microphone array for various flow speeds, angles of attack, and flap deflection angles. Due to the size of the model and assumed closeness of the sound sources, two noise reduction addons were installed interchangeably: trailing-edge brush and flap side-edge porous foam for sound source identification. Analysis of the far-field noise reveals that, while changes to the flap deflection angle alter the far-field noise spectra, the trailing-edge noise remains the predominant noise source at deflection angles (Formula presented.) and (Formula presented.). No additional noise level was observed from the flap side edge within the measurable frequency range at these angles. The flap side-edge noise has an increased role for frequency larger than 2 kHz for the larger flap deflection angles of (Formula presented.) and (Formula presented.).
UR - http://www.scopus.com/inward/record.url?scp=85139989742&partnerID=8YFLogxK
U2 - 10.1002/we.2786
DO - 10.1002/we.2786
M3 - Article
AN - SCOPUS:85139989742
VL - 26
SP - 64
EP - 75
JO - WIND ENERGY
JF - WIND ENERGY
SN - 1095-4244
IS - 1
ER -