Details
| Original language | English |
|---|---|
| Pages (from-to) | 159-165 |
| Number of pages | 7 |
| Journal | Procedia Manufacturing |
| Volume | 24 |
| Early online date | 6 Jul 2018 |
| Publication status | Published - 2018 |
| Event | 4th International Conference on System-Integrated Intelligence: Intelligent, Flexible and Connected Systems in Products and Production, 2018 - Hannover, Germany Duration: 19 Jun 2018 → 20 Jun 2018 |
Abstract
Commercial motor-driven spindles for milling machine tools are generally developed for specific machining operations, such as HPC (High Performance Cutting) or HSC (High Speed Cutting). HPC and HSC require significantly different working ranges regarding spindle speed and torque. E.g. in HPC operations, high torque at low spindle speeds is needed. The two working ranges are covered only limited by a conventional spindle so far. However, a spindle system that can switch the working range allows cost-effective manufacturing of a wider range of materials within the same machine tool. The spindle bearings and the power electronics supply are challenges, when switching between both working ranges. HPC operation requires high bearing stiffness in order to transmit high forces occurring during the cutting process. However, the associated high bearing preload leads to high frictional losses at high speeds for HSC operations. Furthermore, the wide operating range generates contrary requirements for the motor winding. To increase the spindle speeds with a winding being assembled for high torques, the current has to be increased. For this purpose, expensive and non-standardized motor inverters are required. This paper introduces a concept to overcome these challenges. Firstly, an approach to adjust the bearing preload is presented, using a compact, electrically controlled bearing preload element, which is suitable for industrial applications. Next, an approach for a reconfigurable winding design of the spindle motor is shown. This allows electrical switching between the working ranges using conventional motor inverters. Finally, an analysis of the conditions of use of the hybrid spindles is presented.
Keywords
- Hybride spindle, Machine tool, Milling
ASJC Scopus subject areas
- Engineering(all)
- Industrial and Manufacturing Engineering
- Computer Science(all)
- Artificial Intelligence
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Procedia Manufacturing, Vol. 24, 2018, p. 159-165.
Research output: Contribution to journal › Conference article › Research › peer review
}
TY - JOUR
T1 - Hybrid Spindle - An approach for a milling machine tool spindle with extended working range for HSC and HPC
AU - Denkena, B.
AU - Bergmann, B.
AU - Mücke, M.
AU - Königsberg, J.
AU - Ponick, B.
N1 - Funding information: The authors thanks for funding the project H“ ybride Spindel”. The project has been funded by the AiF within the programme for sponsorship by Industrial Joint Research (IGF) of the German Federal Ministry of Economic Affairs and Energy based on an enactment of the German Parliament.
PY - 2018
Y1 - 2018
N2 - Commercial motor-driven spindles for milling machine tools are generally developed for specific machining operations, such as HPC (High Performance Cutting) or HSC (High Speed Cutting). HPC and HSC require significantly different working ranges regarding spindle speed and torque. E.g. in HPC operations, high torque at low spindle speeds is needed. The two working ranges are covered only limited by a conventional spindle so far. However, a spindle system that can switch the working range allows cost-effective manufacturing of a wider range of materials within the same machine tool. The spindle bearings and the power electronics supply are challenges, when switching between both working ranges. HPC operation requires high bearing stiffness in order to transmit high forces occurring during the cutting process. However, the associated high bearing preload leads to high frictional losses at high speeds for HSC operations. Furthermore, the wide operating range generates contrary requirements for the motor winding. To increase the spindle speeds with a winding being assembled for high torques, the current has to be increased. For this purpose, expensive and non-standardized motor inverters are required. This paper introduces a concept to overcome these challenges. Firstly, an approach to adjust the bearing preload is presented, using a compact, electrically controlled bearing preload element, which is suitable for industrial applications. Next, an approach for a reconfigurable winding design of the spindle motor is shown. This allows electrical switching between the working ranges using conventional motor inverters. Finally, an analysis of the conditions of use of the hybrid spindles is presented.
AB - Commercial motor-driven spindles for milling machine tools are generally developed for specific machining operations, such as HPC (High Performance Cutting) or HSC (High Speed Cutting). HPC and HSC require significantly different working ranges regarding spindle speed and torque. E.g. in HPC operations, high torque at low spindle speeds is needed. The two working ranges are covered only limited by a conventional spindle so far. However, a spindle system that can switch the working range allows cost-effective manufacturing of a wider range of materials within the same machine tool. The spindle bearings and the power electronics supply are challenges, when switching between both working ranges. HPC operation requires high bearing stiffness in order to transmit high forces occurring during the cutting process. However, the associated high bearing preload leads to high frictional losses at high speeds for HSC operations. Furthermore, the wide operating range generates contrary requirements for the motor winding. To increase the spindle speeds with a winding being assembled for high torques, the current has to be increased. For this purpose, expensive and non-standardized motor inverters are required. This paper introduces a concept to overcome these challenges. Firstly, an approach to adjust the bearing preload is presented, using a compact, electrically controlled bearing preload element, which is suitable for industrial applications. Next, an approach for a reconfigurable winding design of the spindle motor is shown. This allows electrical switching between the working ranges using conventional motor inverters. Finally, an analysis of the conditions of use of the hybrid spindles is presented.
KW - Hybride spindle
KW - Machine tool
KW - Milling
UR - http://www.scopus.com/inward/record.url?scp=85050408095&partnerID=8YFLogxK
U2 - 10.1016/j.promfg.2018.06.045
DO - 10.1016/j.promfg.2018.06.045
M3 - Conference article
AN - SCOPUS:85050408095
VL - 24
SP - 159
EP - 165
JO - Procedia Manufacturing
JF - Procedia Manufacturing
T2 - 4th International Conference on System-Integrated Intelligence: Intelligent, Flexible and Connected Systems in Products and Production, 2018
Y2 - 19 June 2018 through 20 June 2018
ER -