Details
| Translated title of the contribution | High-performance electromagnets as an actuator of a press - Stamping thin sheets using an electromagnetically actuated press |
|---|---|
| Original language | German |
| Pages (from-to) | 171-174 |
| Number of pages | 4 |
| Journal | WT Werkstattstechnik |
| Volume | 102 |
| Issue number | 3 |
| Publication status | Published - 1 Jan 2012 |
Abstract
At the Leibniz University of Hanover two metal forming machines were developed. These presses are driven by high-performance electro - magnets. Therefore, the kinematics of the ram can be programmed by the operator of the press as the ram is not rigidly connected to an eccentric shaft like at conventional presses. With these presses small components were manufactured accurately up to a stroke rate of 1,600 spm. Furthermore, a servo-electrically driven feeder was developed. This feeder accurately positions the sheet metal while the electromagnetically actuated press is in operation.
ASJC Scopus subject areas
- Engineering(all)
- Control and Systems Engineering
- Engineering(all)
- Automotive Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: WT Werkstattstechnik, Vol. 102, No. 3, 01.01.2012, p. 171-174.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Hochleistungsmagnetaktorik als Pressenantrieb
T2 - Stanzen dünner Bleche mittels eines auf Hochleistungselektromagneten basierenden Antriebs
AU - Behrens, Bernd Arno
AU - Krimm, Richard
AU - Teichrib, Sergej
AU - Czora, Martin
AU - Cahyono, Teguh
AU - Wager, Christian
AU - Ortmaier, Tobias
AU - Riva, Mauro
AU - Hussong, Andreas
AU - Dagen, Matthias
PY - 2012/1/1
Y1 - 2012/1/1
N2 - At the Leibniz University of Hanover two metal forming machines were developed. These presses are driven by high-performance electro - magnets. Therefore, the kinematics of the ram can be programmed by the operator of the press as the ram is not rigidly connected to an eccentric shaft like at conventional presses. With these presses small components were manufactured accurately up to a stroke rate of 1,600 spm. Furthermore, a servo-electrically driven feeder was developed. This feeder accurately positions the sheet metal while the electromagnetically actuated press is in operation.
AB - At the Leibniz University of Hanover two metal forming machines were developed. These presses are driven by high-performance electro - magnets. Therefore, the kinematics of the ram can be programmed by the operator of the press as the ram is not rigidly connected to an eccentric shaft like at conventional presses. With these presses small components were manufactured accurately up to a stroke rate of 1,600 spm. Furthermore, a servo-electrically driven feeder was developed. This feeder accurately positions the sheet metal while the electromagnetically actuated press is in operation.
UR - http://www.scopus.com/inward/record.url?scp=85026921124&partnerID=8YFLogxK
M3 - Artikel
AN - SCOPUS:85026921124
VL - 102
SP - 171
EP - 174
JO - WT Werkstattstechnik
JF - WT Werkstattstechnik
IS - 3
ER -