Details
| Original language | English |
|---|---|
| Title of host publication | Fiber Lasers and Glass Photonics |
| Subtitle of host publication | Materials through Applications III |
| Editors | Maurizio Ferrari, Angela B. Seddon, Stefano Taccheo, Stefano Taccheo |
| Publisher | SPIE |
| ISBN (electronic) | 9781510651609 |
| Publication status | Published - 25 May 2022 |
| Event | Fiber Lasers and Glass Photonics: Materials through Applications III 2022 - Virtual, Online Duration: 9 May 2022 → 20 May 2022 |
Publication series
| Name | Proceedings of SPIE - The International Society for Optical Engineering |
|---|---|
| Volume | 12142 |
| ISSN (Print) | 0277-786X |
| ISSN (electronic) | 1996-756X |
Abstract
Nowadays, continuous wave (cw) lasers have conquered a broad spectrum of applications in industrial laser processing and can be considered as the dominant tools in many manufacturing floors. This is reflected by the enormous average annual growth rates of 25-30 % and the continuous research efforts dedicated to this laser type leading to ever increasing output power and beam quality. This development imposes ever increasing demands on the quality of the optical laser components, that have to withstand the usually harsh industrial environment and high power levels. In fact, the corresponding of the laser components is a key factor for the efficiency and economic success of an employed laser material process. This in turn requires a thorough assessment of the quality parameters ruling the stability of such components. Among many other quality parameters, the Laser Induced Damage Threshold (LIDT) is one of the leading parameters that has to be investigated in detail. The corresponding measurement facilities and protocols as well as the evaluation of the data have to be performed with high reproducibility and comparability among different testing laboratories. As a consequence, such qualifications can only be achieved on the basis of well-defined international standards defining the complete procedure for the determination of LIDT values. We investigated the laser induced damage threshold of different types of optics using a cw laser with a wavelength of 1030 nm and power up to 6 kW, applying beam diameters of approximately 200-300 µm on the surface. The samples were irradiated for at least 30s or until damage occurred. First, it was necessary to review the existing DIN EN ISO 21254 regarding cw-irradiation of mirrors with a 25 mm diameter. An important aspect is the number of possible irradiation spots on each optic with respect to the damage size as well as the emitted debris. Both effects limit the statistical accuracy, the ISO procedure needs to be adapted to the measurement conditions. Additionally, we investigated the influence of substrate materials and coating processes on the LIDT of high reflective coatings and their damage behavior, especially regarding their thermal conductivity. The results were then compared with simulations concerning the maximum temperature within the optical component.
Keywords
- continuous wave, heat transfer, high power, laser-induced damage, measurement routine
ASJC Scopus subject areas
- Materials Science(all)
- Electronic, Optical and Magnetic Materials
- Physics and Astronomy(all)
- Condensed Matter Physics
- Computer Science(all)
- Computer Science Applications
- Mathematics(all)
- Applied Mathematics
- Engineering(all)
- Electrical and Electronic Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Fiber Lasers and Glass Photonics: Materials through Applications III. ed. / Maurizio Ferrari; Angela B. Seddon; Stefano Taccheo; Stefano Taccheo. SPIE, 2022. 121420F (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 12142).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - High power laser-induced damage investigations of mirrors with several substrate materials in combination with heat transfer simulations
AU - Kiedrowski, K.
AU - Jupé, M.
AU - Kennedy, M.
AU - Ehlers, H.
AU - Wienke, A.
AU - Ristau, D.
N1 - Funding Information: The authors thank the Federal Ministry for Economic Affairs and Climate Action for the financial support of the project (project numbers 03TN0010A, 03TN0010B) and the Cluster of Excellence PhoenixD under Germany´s Excellence Strategy by the Deutsche Forschungsgemeinschaft DFG (EXC 2122, Project ID 390833453).
PY - 2022/5/25
Y1 - 2022/5/25
N2 - Nowadays, continuous wave (cw) lasers have conquered a broad spectrum of applications in industrial laser processing and can be considered as the dominant tools in many manufacturing floors. This is reflected by the enormous average annual growth rates of 25-30 % and the continuous research efforts dedicated to this laser type leading to ever increasing output power and beam quality. This development imposes ever increasing demands on the quality of the optical laser components, that have to withstand the usually harsh industrial environment and high power levels. In fact, the corresponding of the laser components is a key factor for the efficiency and economic success of an employed laser material process. This in turn requires a thorough assessment of the quality parameters ruling the stability of such components. Among many other quality parameters, the Laser Induced Damage Threshold (LIDT) is one of the leading parameters that has to be investigated in detail. The corresponding measurement facilities and protocols as well as the evaluation of the data have to be performed with high reproducibility and comparability among different testing laboratories. As a consequence, such qualifications can only be achieved on the basis of well-defined international standards defining the complete procedure for the determination of LIDT values. We investigated the laser induced damage threshold of different types of optics using a cw laser with a wavelength of 1030 nm and power up to 6 kW, applying beam diameters of approximately 200-300 µm on the surface. The samples were irradiated for at least 30s or until damage occurred. First, it was necessary to review the existing DIN EN ISO 21254 regarding cw-irradiation of mirrors with a 25 mm diameter. An important aspect is the number of possible irradiation spots on each optic with respect to the damage size as well as the emitted debris. Both effects limit the statistical accuracy, the ISO procedure needs to be adapted to the measurement conditions. Additionally, we investigated the influence of substrate materials and coating processes on the LIDT of high reflective coatings and their damage behavior, especially regarding their thermal conductivity. The results were then compared with simulations concerning the maximum temperature within the optical component.
AB - Nowadays, continuous wave (cw) lasers have conquered a broad spectrum of applications in industrial laser processing and can be considered as the dominant tools in many manufacturing floors. This is reflected by the enormous average annual growth rates of 25-30 % and the continuous research efforts dedicated to this laser type leading to ever increasing output power and beam quality. This development imposes ever increasing demands on the quality of the optical laser components, that have to withstand the usually harsh industrial environment and high power levels. In fact, the corresponding of the laser components is a key factor for the efficiency and economic success of an employed laser material process. This in turn requires a thorough assessment of the quality parameters ruling the stability of such components. Among many other quality parameters, the Laser Induced Damage Threshold (LIDT) is one of the leading parameters that has to be investigated in detail. The corresponding measurement facilities and protocols as well as the evaluation of the data have to be performed with high reproducibility and comparability among different testing laboratories. As a consequence, such qualifications can only be achieved on the basis of well-defined international standards defining the complete procedure for the determination of LIDT values. We investigated the laser induced damage threshold of different types of optics using a cw laser with a wavelength of 1030 nm and power up to 6 kW, applying beam diameters of approximately 200-300 µm on the surface. The samples were irradiated for at least 30s or until damage occurred. First, it was necessary to review the existing DIN EN ISO 21254 regarding cw-irradiation of mirrors with a 25 mm diameter. An important aspect is the number of possible irradiation spots on each optic with respect to the damage size as well as the emitted debris. Both effects limit the statistical accuracy, the ISO procedure needs to be adapted to the measurement conditions. Additionally, we investigated the influence of substrate materials and coating processes on the LIDT of high reflective coatings and their damage behavior, especially regarding their thermal conductivity. The results were then compared with simulations concerning the maximum temperature within the optical component.
KW - continuous wave
KW - heat transfer
KW - high power
KW - laser-induced damage
KW - measurement routine
UR - http://www.scopus.com/inward/record.url?scp=85132896678&partnerID=8YFLogxK
U2 - 10.1117/12.2621132
DO - 10.1117/12.2621132
M3 - Conference contribution
AN - SCOPUS:85132896678
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - Fiber Lasers and Glass Photonics
A2 - Ferrari, Maurizio
A2 - Seddon, Angela B.
A2 - Taccheo, Stefano
A2 - Taccheo, Stefano
PB - SPIE
T2 - Fiber Lasers and Glass Photonics: Materials through Applications III 2022
Y2 - 9 May 2022 through 20 May 2022
ER -