Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Authors

  • C. Menze
  • M. Itterheim
  • H. C. Möhring
  • J. Stegmann
  • S. Kabelac

Research Organisations

External Research Organisations

  • University of Stuttgart
View graph of relations

Details

Original languageEnglish
Title of host publicationLecture Notes in Production Engineering
PublisherSpringer Nature
Pages246-255
Number of pages10
ISBN (electronic)978-3-031-18318-8
ISBN (print)978-3-031-18317-1
Publication statusPublished - 2 Feb 2023

Publication series

NameLecture Notes in Production Engineering
VolumePart F1163
ISSN (Print)2194-0525
ISSN (electronic)2194-0533

Abstract

This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.

Keywords

    Coolant, Fluid dynamics, Sawing

ASJC Scopus subject areas

Cite this

Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process. / Menze, C.; Itterheim, M.; Möhring, H. C. et al.
Lecture Notes in Production Engineering. Springer Nature, 2023. p. 246-255 (Lecture Notes in Production Engineering; Vol. Part F1163).

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Menze, C, Itterheim, M, Möhring, HC, Stegmann, J & Kabelac, S 2023, Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process. in Lecture Notes in Production Engineering. Lecture Notes in Production Engineering, vol. Part F1163, Springer Nature, pp. 246-255. https://doi.org/10.1007/978-3-031-18318-8_26
Menze, C., Itterheim, M., Möhring, H. C., Stegmann, J., & Kabelac, S. (2023). Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process. In Lecture Notes in Production Engineering (pp. 246-255). (Lecture Notes in Production Engineering; Vol. Part F1163). Springer Nature. https://doi.org/10.1007/978-3-031-18318-8_26
Menze C, Itterheim M, Möhring HC, Stegmann J, Kabelac S. Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process. In Lecture Notes in Production Engineering. Springer Nature. 2023. p. 246-255. (Lecture Notes in Production Engineering). doi: 10.1007/978-3-031-18318-8_26
Menze, C. ; Itterheim, M. ; Möhring, H. C. et al. / Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process. Lecture Notes in Production Engineering. Springer Nature, 2023. pp. 246-255 (Lecture Notes in Production Engineering).
Download
@inbook{26f9c123f5d7417082dbf8a62f30ff76,
title = "Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process",
abstract = "This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.",
keywords = "Coolant, Fluid dynamics, Sawing",
author = "C. Menze and M. Itterheim and M{\"o}hring, {H. C.} and J. Stegmann and S. Kabelac",
note = "Funding Information: Acknowledgement. The authors appreciate the funding by the German Research Foundation (DFG) – project number 439925537.",
year = "2023",
month = feb,
day = "2",
doi = "10.1007/978-3-031-18318-8_26",
language = "English",
isbn = "978-3-031-18317-1",
series = "Lecture Notes in Production Engineering",
publisher = "Springer Nature",
pages = "246--255",
booktitle = "Lecture Notes in Production Engineering",
address = "United States",

}

Download

TY - CHAP

T1 - Fluid Dynamics and Influence of an Internal Coolant Supply in the Sawing Process

AU - Menze, C.

AU - Itterheim, M.

AU - Möhring, H. C.

AU - Stegmann, J.

AU - Kabelac, S.

N1 - Funding Information: Acknowledgement. The authors appreciate the funding by the German Research Foundation (DFG) – project number 439925537.

PY - 2023/2/2

Y1 - 2023/2/2

N2 - This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.

AB - This paper contains the first steps for an analysis of the fluid dynamics in a circular sawing process with an internal cooling as part of an ongoing project. The analysis takes place with a test rig for orthogonal cutting of the IfW of the University of Stuttgart, which is modified to be able to create an artificial narrow closed cutting gap. It is built with sapphire glasses on the sides to make the fluid dynamics and the chip formation in the gap visible and analyzable. The investigation of the fluid dynamics carried out with the PIVLab software, which is a module in Matlab.

KW - Coolant

KW - Fluid dynamics

KW - Sawing

UR - http://www.scopus.com/inward/record.url?scp=85166676063&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-18318-8_26

DO - 10.1007/978-3-031-18318-8_26

M3 - Contribution to book/anthology

AN - SCOPUS:85166676063

SN - 978-3-031-18317-1

T3 - Lecture Notes in Production Engineering

SP - 246

EP - 255

BT - Lecture Notes in Production Engineering

PB - Springer Nature

ER -