Details
| Original language | English |
|---|---|
| Journal | Heat Transfer |
| Early online date | 10 Mar 2025 |
| Publication status | E-pub ahead of print - 10 Mar 2025 |
Abstract
In recent years, the advancement of the additive manufacturing (AM) process has become popular in making very complex shapes, including compact plate-fin heat exchangers. This provides considerable flexibility in creating a complex geometry, is cost-effective, and eliminates a variety of manufacturing processes in a compact heat exchanger (CHE). CHEs are known to have a high heat-transfer area per unit volume greater than 700 m2/m3, which can be achieved by using high-density fins whose hydraulic diameters vary between 1 and 3 mm, which is much higher than that of conventional manufacturing components. This study aims to measure accurate pressure-drop values by estimating the fanning friction factor f across four types of CHEs produced by an AM process. Four types of CHEs were manufactured using AM techniques by varying their internal geometry (secondary surfaces). All four types of CHEs were subjected to pressure-drop measurements using air as the fluid by establishing dedicated experimental facilities. The friction factor f was estimated at various air mass flow rates by varying the Reynolds number in the laminar region up to 1800. The friction factors were found to be 1.5–3 times higher than the conventional manufacture of CHEs. In addition, an attempt was made to understand the difference between the surface topography of the AM process CHE heat exchanger and that of the computational fluid dynamics model. The information provided in this paper is very useful for CHE designers and researchers to understand the implications of surface roughness due to the AM process for CHEs.
Keywords
- compact heat exchangers, heat transfer, heat-transfer enhancement, pressure drop
ASJC Scopus subject areas
- Physics and Astronomy(all)
- Condensed Matter Physics
- Chemical Engineering(all)
- Fluid Flow and Transfer Processes
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Heat Transfer, 10.03.2025.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Experimental Measurements of Fanning Friction Factors in Various Types of Additively Manufactured Compact Heat Exchangers
AU - Ranganayakulu, Chennu
AU - Fuchs, Marcos
AU - Kabelac, Stephan
N1 - Publisher Copyright: © 2025 Wiley Periodicals LLC.
PY - 2025/3/10
Y1 - 2025/3/10
N2 - In recent years, the advancement of the additive manufacturing (AM) process has become popular in making very complex shapes, including compact plate-fin heat exchangers. This provides considerable flexibility in creating a complex geometry, is cost-effective, and eliminates a variety of manufacturing processes in a compact heat exchanger (CHE). CHEs are known to have a high heat-transfer area per unit volume greater than 700 m2/m3, which can be achieved by using high-density fins whose hydraulic diameters vary between 1 and 3 mm, which is much higher than that of conventional manufacturing components. This study aims to measure accurate pressure-drop values by estimating the fanning friction factor f across four types of CHEs produced by an AM process. Four types of CHEs were manufactured using AM techniques by varying their internal geometry (secondary surfaces). All four types of CHEs were subjected to pressure-drop measurements using air as the fluid by establishing dedicated experimental facilities. The friction factor f was estimated at various air mass flow rates by varying the Reynolds number in the laminar region up to 1800. The friction factors were found to be 1.5–3 times higher than the conventional manufacture of CHEs. In addition, an attempt was made to understand the difference between the surface topography of the AM process CHE heat exchanger and that of the computational fluid dynamics model. The information provided in this paper is very useful for CHE designers and researchers to understand the implications of surface roughness due to the AM process for CHEs.
AB - In recent years, the advancement of the additive manufacturing (AM) process has become popular in making very complex shapes, including compact plate-fin heat exchangers. This provides considerable flexibility in creating a complex geometry, is cost-effective, and eliminates a variety of manufacturing processes in a compact heat exchanger (CHE). CHEs are known to have a high heat-transfer area per unit volume greater than 700 m2/m3, which can be achieved by using high-density fins whose hydraulic diameters vary between 1 and 3 mm, which is much higher than that of conventional manufacturing components. This study aims to measure accurate pressure-drop values by estimating the fanning friction factor f across four types of CHEs produced by an AM process. Four types of CHEs were manufactured using AM techniques by varying their internal geometry (secondary surfaces). All four types of CHEs were subjected to pressure-drop measurements using air as the fluid by establishing dedicated experimental facilities. The friction factor f was estimated at various air mass flow rates by varying the Reynolds number in the laminar region up to 1800. The friction factors were found to be 1.5–3 times higher than the conventional manufacture of CHEs. In addition, an attempt was made to understand the difference between the surface topography of the AM process CHE heat exchanger and that of the computational fluid dynamics model. The information provided in this paper is very useful for CHE designers and researchers to understand the implications of surface roughness due to the AM process for CHEs.
KW - compact heat exchangers
KW - heat transfer
KW - heat-transfer enhancement
KW - pressure drop
UR - http://www.scopus.com/inward/record.url?scp=86000628694&partnerID=8YFLogxK
U2 - 10.1002/htj.23319
DO - 10.1002/htj.23319
M3 - Article
AN - SCOPUS:86000628694
JO - Heat Transfer
JF - Heat Transfer
SN - 2688-4534
ER -