Details
| Original language | English |
|---|---|
| Article number | 2400002 |
| Number of pages | 13 |
| Journal | Advanced engineering materials |
| Volume | 26 |
| Issue number | 11 |
| Early online date | 11 Apr 2024 |
| Publication status | Published - 5 Jun 2024 |
Abstract
This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with different thicknesses of layers, but constant thickness ratio, are examined by optical and scanning electron microscopy prior to and postannealing process at 1000 °C for 16 h. Scanning electron microscopy– energy-dispersive X-ray spectroscopy and transmission electron microscopy studies reveal the presence of Ti2Ni and Ni4Ti3 precipitates in the as-printed NiTi/NiTiCu samples and Ti2Ni type precipitates in as-printed NiTi/NiTiHf. Digital image correlation quantifies residual strain in the as-printed bilayer and enables strain relief to be monitored during heating. It has been shown that microcracks occurring along interfacial zones during the laser powder bed fusion are diminished after annealing heat treatment. The microcrack closure occurs by diffusion of third elements to the open microcracks, leading to precipitation and accumulation of third elements in the interfaces. Eventually, the as-printed NiTi/NiTiCu sample displays two-way shape memory effects with about 24.5% shape recovery. This work enhances understanding of controlling fabrication to yield tailored properties in additively manufactured functionally graded NiTi-based materials.
Keywords
- additive manufacturing, characterizations, interfaces, shape memory alloys, thermal analyses, two-way shape memory effects
ASJC Scopus subject areas
- Materials Science(all)
- General Materials Science
- Physics and Astronomy(all)
- Condensed Matter Physics
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Advanced engineering materials, Vol. 26, No. 11, 2400002, 05.06.2024.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion
AU - Memarian, Mahshid
AU - Mohri, Maryam
AU - Golrang, Mahbod
AU - Leinenbach, Christian
AU - Ferretto, Irene
AU - Ghafoori, Elyas
AU - Nili-Ahmadabadi, Mahmoud
N1 - Publisher Copyright: © 2024 The Authors. Advanced Engineering Materials published by Wiley-VCH GmbH.
PY - 2024/6/5
Y1 - 2024/6/5
N2 - This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with different thicknesses of layers, but constant thickness ratio, are examined by optical and scanning electron microscopy prior to and postannealing process at 1000 °C for 16 h. Scanning electron microscopy– energy-dispersive X-ray spectroscopy and transmission electron microscopy studies reveal the presence of Ti2Ni and Ni4Ti3 precipitates in the as-printed NiTi/NiTiCu samples and Ti2Ni type precipitates in as-printed NiTi/NiTiHf. Digital image correlation quantifies residual strain in the as-printed bilayer and enables strain relief to be monitored during heating. It has been shown that microcracks occurring along interfacial zones during the laser powder bed fusion are diminished after annealing heat treatment. The microcrack closure occurs by diffusion of third elements to the open microcracks, leading to precipitation and accumulation of third elements in the interfaces. Eventually, the as-printed NiTi/NiTiCu sample displays two-way shape memory effects with about 24.5% shape recovery. This work enhances understanding of controlling fabrication to yield tailored properties in additively manufactured functionally graded NiTi-based materials.
AB - This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with different thicknesses of layers, but constant thickness ratio, are examined by optical and scanning electron microscopy prior to and postannealing process at 1000 °C for 16 h. Scanning electron microscopy– energy-dispersive X-ray spectroscopy and transmission electron microscopy studies reveal the presence of Ti2Ni and Ni4Ti3 precipitates in the as-printed NiTi/NiTiCu samples and Ti2Ni type precipitates in as-printed NiTi/NiTiHf. Digital image correlation quantifies residual strain in the as-printed bilayer and enables strain relief to be monitored during heating. It has been shown that microcracks occurring along interfacial zones during the laser powder bed fusion are diminished after annealing heat treatment. The microcrack closure occurs by diffusion of third elements to the open microcracks, leading to precipitation and accumulation of third elements in the interfaces. Eventually, the as-printed NiTi/NiTiCu sample displays two-way shape memory effects with about 24.5% shape recovery. This work enhances understanding of controlling fabrication to yield tailored properties in additively manufactured functionally graded NiTi-based materials.
KW - additive manufacturing
KW - characterizations
KW - interfaces
KW - shape memory alloys
KW - thermal analyses
KW - two-way shape memory effects
UR - http://www.scopus.com/inward/record.url?scp=85190782650&partnerID=8YFLogxK
U2 - 10.1002/adem.202400002
DO - 10.1002/adem.202400002
M3 - Article
AN - SCOPUS:85190782650
VL - 26
JO - Advanced engineering materials
JF - Advanced engineering materials
SN - 1438-1656
IS - 11
M1 - 2400002
ER -