Energy balance in precision hard machining with worn CBN cutting tools

Research output: Contribution to conference › Paper › Research › peer review

Authors

  • Wit Grzesik
  • Berend Denkena
  • Krzysztof Zak
  • Thilo Grove
  • Benjamin Bergmann

Research Organisations

External Research Organisations

  • Opole University of Technology
View graph of relations

Details

Original languageEnglish
Publication statusPublished - 18 Oct 2015
Event8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, Japan
Duration: 18 Oct 2015 → 22 Oct 2015

Conference

Conference8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
Country/TerritoryJapan
CityKyoto
Period18 Oct 2015 → 22 Oct 2015

Abstract

This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

Keywords

    CBN tool, Cutting energy, Hard machining, Ploughing energy, Tool wear

ASJC Scopus subject areas

Cite this

Energy balance in precision hard machining with worn CBN cutting tools. / Grzesik, Wit; Denkena, Berend; Zak, Krzysztof et al.
2015. Paper presented at 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.

Research output: Contribution to conference › Paper › Research › peer review

Grzesik, W, Denkena, B, Zak, K, Grove, T & Bergmann, B 2015, 'Energy balance in precision hard machining with worn CBN cutting tools', Paper presented at 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, 18 Oct 2015 - 22 Oct 2015.
Grzesik, W., Denkena, B., Zak, K., Grove, T., & Bergmann, B. (2015). Energy balance in precision hard machining with worn CBN cutting tools. Paper presented at 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Grzesik W, Denkena B, Zak K, Grove T, Bergmann B. Energy balance in precision hard machining with worn CBN cutting tools. 2015. Paper presented at 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Grzesik, Wit ; Denkena, Berend ; Zak, Krzysztof et al. / Energy balance in precision hard machining with worn CBN cutting tools. Paper presented at 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan.
Download
@conference{30b38b16ad844c2894db078bf502e459,
title = "Energy balance in precision hard machining with worn CBN cutting tools",
abstract = "This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.",
keywords = "CBN tool, Cutting energy, Hard machining, Ploughing energy, Tool wear",
author = "Wit Grzesik and Berend Denkena and Krzysztof Zak and Thilo Grove and Benjamin Bergmann",
year = "2015",
month = oct,
day = "18",
language = "English",
note = "8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 ; Conference date: 18-10-2015 Through 22-10-2015",

}

Download

TY - CONF

T1 - Energy balance in precision hard machining with worn CBN cutting tools

AU - Grzesik, Wit

AU - Denkena, Berend

AU - Zak, Krzysztof

AU - Grove, Thilo

AU - Bergmann, Benjamin

PY - 2015/10/18

Y1 - 2015/10/18

N2 - This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

AB - This paper highlights the influence of tool wear on the energy balance in precision hard turning using CBN cutting tools. Experimental plan includes continuous measurements of the tool nose wear VBC and the corresponding changes of component forces Fc, Ff and Fp. Variable factors were feed rate, depth of cut and tool nose radius. The experimental data were recorded during wear test duration of maximum 100 min. As a result, the specific cutting and ploughing energies were determined for all measuring points. It was reasoned that the balance between the specific and ploughing energies can effectively be used to optimize hard machining operations.

KW - CBN tool

KW - Cutting energy

KW - Hard machining

KW - Ploughing energy

KW - Tool wear

UR - http://www.scopus.com/inward/record.url?scp=84974571348&partnerID=8YFLogxK

M3 - Paper

T2 - 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015

Y2 - 18 October 2015 through 22 October 2015

ER -