Electric field control of a premixed turbulent flame at high pressure

Research output: Contribution to conferencePaperResearchpeer review

Authors

  • A. Sakhrieh
  • G. Lins
  • F. Dinkelacker
  • T. Hammer
  • A. Leipertz
  • D. W. Branston

External Research Organisations

  • Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU Erlangen-Nürnberg)
  • Siemens AG
View graph of relations

Details

Original languageEnglish
Pages200
Number of pages1
Publication statusPublished - 2004
Externally publishedYes
Event30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations - Chicago, IL, United States
Duration: 25 Jul 200430 Jul 2004

Conference

Conference30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations
Country/TerritoryUnited States
CityChicago, IL
Period25 Jul 200430 Jul 2004

Abstract

Electric field control of combustion offers the potential of stabilizing flames and reducing emissions with comparatively little effort. The concentration of pollutants such as CO, NO, and NO2 in the presence of an electric field depends on the ratio U/p of electrode voltage U and pressure p, which implies that the electric field strength required to obtain a given effect increases linearly with pressure. In an electric field directed towards the burner, CO emissions could be reduced by about 90%, irrespective of pressure. The decrease of CO was accompanied by an increase of NOx by about 20%. The electric power required for a CO reduction of 90% amounted to 0.1% of the thermal power. The improvement of the lean blow-off limit upon application of an electric field observed so far ranged from 1 to 3 % and increases with pressure. Experiments were conducted in the high-pressure burner facility at the Department of Technical Thermodynamics of the University of Erlangen. The combustion chamber with 200 mm ID and 420 mm height was designed and constructed for flame experiments in the pressure range from 1 to 11 bar. Premixed methane and air exited the burner head through a central hole 9 mm dia which is surrounded by six further hole 7 mm dia such that 7 flames coexist on the burner. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).

ASJC Scopus subject areas

Cite this

Electric field control of a premixed turbulent flame at high pressure. / Sakhrieh, A.; Lins, G.; Dinkelacker, F. et al.
2004. 200 Paper presented at 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations, Chicago, IL, United States.

Research output: Contribution to conferencePaperResearchpeer review

Sakhrieh, A, Lins, G, Dinkelacker, F, Hammer, T, Leipertz, A & Branston, DW 2004, 'Electric field control of a premixed turbulent flame at high pressure', Paper presented at 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations, Chicago, IL, United States, 25 Jul 2004 - 30 Jul 2004 pp. 200.
Sakhrieh, A., Lins, G., Dinkelacker, F., Hammer, T., Leipertz, A., & Branston, D. W. (2004). Electric field control of a premixed turbulent flame at high pressure. 200. Paper presented at 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations, Chicago, IL, United States.
Sakhrieh A, Lins G, Dinkelacker F, Hammer T, Leipertz A, Branston DW. Electric field control of a premixed turbulent flame at high pressure. 2004. Paper presented at 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations, Chicago, IL, United States.
Sakhrieh, A. ; Lins, G. ; Dinkelacker, F. et al. / Electric field control of a premixed turbulent flame at high pressure. Paper presented at 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations, Chicago, IL, United States.1 p.
Download
@conference{bef5ad5b894e4e27900af41987174450,
title = "Electric field control of a premixed turbulent flame at high pressure",
abstract = "Electric field control of combustion offers the potential of stabilizing flames and reducing emissions with comparatively little effort. The concentration of pollutants such as CO, NO, and NO2 in the presence of an electric field depends on the ratio U/p of electrode voltage U and pressure p, which implies that the electric field strength required to obtain a given effect increases linearly with pressure. In an electric field directed towards the burner, CO emissions could be reduced by about 90%, irrespective of pressure. The decrease of CO was accompanied by an increase of NOx by about 20%. The electric power required for a CO reduction of 90% amounted to 0.1% of the thermal power. The improvement of the lean blow-off limit upon application of an electric field observed so far ranged from 1 to 3 % and increases with pressure. Experiments were conducted in the high-pressure burner facility at the Department of Technical Thermodynamics of the University of Erlangen. The combustion chamber with 200 mm ID and 420 mm height was designed and constructed for flame experiments in the pressure range from 1 to 11 bar. Premixed methane and air exited the burner head through a central hole 9 mm dia which is surrounded by six further hole 7 mm dia such that 7 flames coexist on the burner. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).",
author = "A. Sakhrieh and G. Lins and F. Dinkelacker and T. Hammer and A. Leipertz and Branston, {D. W.}",
year = "2004",
language = "English",
pages = "200",
note = "30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations ; Conference date: 25-07-2004 Through 30-07-2004",

}

Download

TY - CONF

T1 - Electric field control of a premixed turbulent flame at high pressure

AU - Sakhrieh, A.

AU - Lins, G.

AU - Dinkelacker, F.

AU - Hammer, T.

AU - Leipertz, A.

AU - Branston, D. W.

PY - 2004

Y1 - 2004

N2 - Electric field control of combustion offers the potential of stabilizing flames and reducing emissions with comparatively little effort. The concentration of pollutants such as CO, NO, and NO2 in the presence of an electric field depends on the ratio U/p of electrode voltage U and pressure p, which implies that the electric field strength required to obtain a given effect increases linearly with pressure. In an electric field directed towards the burner, CO emissions could be reduced by about 90%, irrespective of pressure. The decrease of CO was accompanied by an increase of NOx by about 20%. The electric power required for a CO reduction of 90% amounted to 0.1% of the thermal power. The improvement of the lean blow-off limit upon application of an electric field observed so far ranged from 1 to 3 % and increases with pressure. Experiments were conducted in the high-pressure burner facility at the Department of Technical Thermodynamics of the University of Erlangen. The combustion chamber with 200 mm ID and 420 mm height was designed and constructed for flame experiments in the pressure range from 1 to 11 bar. Premixed methane and air exited the burner head through a central hole 9 mm dia which is surrounded by six further hole 7 mm dia such that 7 flames coexist on the burner. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).

AB - Electric field control of combustion offers the potential of stabilizing flames and reducing emissions with comparatively little effort. The concentration of pollutants such as CO, NO, and NO2 in the presence of an electric field depends on the ratio U/p of electrode voltage U and pressure p, which implies that the electric field strength required to obtain a given effect increases linearly with pressure. In an electric field directed towards the burner, CO emissions could be reduced by about 90%, irrespective of pressure. The decrease of CO was accompanied by an increase of NOx by about 20%. The electric power required for a CO reduction of 90% amounted to 0.1% of the thermal power. The improvement of the lean blow-off limit upon application of an electric field observed so far ranged from 1 to 3 % and increases with pressure. Experiments were conducted in the high-pressure burner facility at the Department of Technical Thermodynamics of the University of Erlangen. The combustion chamber with 200 mm ID and 420 mm height was designed and constructed for flame experiments in the pressure range from 1 to 11 bar. Premixed methane and air exited the burner head through a central hole 9 mm dia which is surrounded by six further hole 7 mm dia such that 7 flames coexist on the burner. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).

UR - http://www.scopus.com/inward/record.url?scp=10644286641&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:10644286641

SP - 200

T2 - 30th International Symposium on Combustion, Abstracts of Works-in-Progress Poster Presentations

Y2 - 25 July 2004 through 30 July 2004

ER -